|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | COPYRIGHT | SEE ALSO | AUTHORS | COLOPHON |
|
MODPROBE(8) modprobe MODPROBE(8)
modprobe - Add and remove modules from the Linux Kernel
modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [modulename]
[module parameters...]
modprobe [-r] [-v] [-n] [-i] [modulename...]
modprobe [-c]
modprobe [--dump-modversions] [filename]
modprobe intelligently adds or removes a module from the Linux
kernel: note that for convenience, there is no difference between _
and - in module names (automatic underscore conversion is performed).
modprobe looks in the module directory /lib/modules/`uname -r` for
all the modules and other files, except for the optional
configuration files in the /etc/modprobe.d directory (see
modprobe.d(5)). modprobe will also use module options specified on
the kernel command line in the form of <module>.<option> and
blacklists in the form of modprobe.blacklist=<module>.
Note that unlike in 2.4 series Linux kernels (which are not supported
by this tool) this version of modprobe does not do anything to the
module itself: the work of resolving symbols and understanding
parameters is done inside the kernel. So module failure is sometimes
accompanied by a kernel message: see dmesg(8).
modprobe expects an up-to-date modules.dep.bin file as generated by
the corresponding depmod utility shipped along with modprobe (see
depmod(8)). This file lists what other modules each module needs (if
any), and modprobe uses this to add or remove these dependencies
automatically.
If any arguments are given after the modulename, they are passed to
the kernel (in addition to any options listed in the configuration
file).
-a, --all
Insert all module names on the command line.
-b, --use-blacklist
This option causes modprobe to apply the blacklist commands in
the configuration files (if any) to module names as well. It is
usually used by udev(7).
-C, --config
This option overrides the default configuration directory
(/etc/modprobe.d).
This option is passed through install or remove commands to other
modprobe commands in the MODPROBE_OPTIONS environment variable.
-c, --showconfig
Dump out the effective configuration from the config directory
and exit.
--dump-modversions
Print out a list of module versioning information required by a
module. This option is commonly used by distributions in order to
package up a Linux kernel module using module versioning deps.
-d, --dirname
Root directory for modules, / by default.
--first-time
Normally, modprobe will succeed (and do nothing) if told to
insert a module which is already present or to remove a module
which isn't present. This is ideal for simple scripts; however,
more complicated scripts often want to know whether modprobe
really did something: this option makes modprobe fail in the case
that it actually didn't do anything.
--force-vermagic
Every module contains a small string containing important
information, such as the kernel and compiler versions. If a
module fails to load and the kernel complains that the "version
magic" doesn't match, you can use this option to remove it.
Naturally, this check is there for your protection, so this using
option is dangerous unless you know what you're doing.
This applies to any modules inserted: both the module (or alias)
on the command line and any modules on which it depends.
--force-modversion
When modules are compiled with CONFIG_MODVERSIONS set, a section
detailing the versions of every interfaced used by (or supplied
by) the module is created. If a module fails to load and the
kernel complains that the module disagrees about a version of
some interface, you can use "--force-modversion" to remove the
version information altogether. Naturally, this check is there
for your protection, so using this option is dangerous unless you
know what you're doing.
This applies any modules inserted: both the module (or alias) on
the command line and any modules on which it depends.
-f, --force
Try to strip any versioning information from the module which
might otherwise stop it from loading: this is the same as using
both --force-vermagic and --force-modversion. Naturally, these
checks are there for your protection, so using this option is
dangerous unless you know what you are doing.
This applies to any modules inserted: both the module (or alias)
on the command line and any modules it on which it depends.
-i, --ignore-install, --ignore-remove
This option causes modprobe to ignore install and remove commands
in the configuration file (if any) for the module specified on
the command line (any dependent modules are still subject to
commands set for them in the configuration file). Both install
and remove commands will currently be ignored when this option is
used regardless of whether the request was more specifically made
with only one or other (and not both) of --ignore-install or
--ignore-remove. See modprobe.d(5).
-n, --dry-run, --show
This option does everything but actually insert or delete the
modules (or run the install or remove commands). Combined with
-v, it is useful for debugging problems. For historical reasons
both --dry-run and --show actually mean the same thing and are
interchangeable.
-q, --quiet
With this flag, modprobe won't print an error message if you try
to remove or insert a module it can't find (and isn't an alias or
install/remove command). However, it will still return with a
non-zero exit status. The kernel uses this to opportunistically
probe for modules which might exist using request_module.
-R, --resolve-alias
Print all module names matching an alias. This can be useful for
debugging module alias problems.
-r, --remove
This option causes modprobe to remove rather than insert a
module. If the modules it depends on are also unused, modprobe
will try to remove them too. Unlike insertion, more than one
module can be specified on the command line (it does not make
sense to specify module parameters when removing modules).
There is usually no reason to remove modules, but some buggy
modules require it. Your distribution kernel may not have been
built to support removal of modules at all.
-S, --set-version
Set the kernel version, rather than using uname(2) to decide on
the kernel version (which dictates where to find the modules).
--show-depends
List the dependencies of a module (or alias), including the
module itself. This produces a (possibly empty) set of module
filenames, one per line, each starting with "insmod" and is
typically used by distributions to determine which modules to
include when generating initrd/initramfs images. Install
commands which apply are shown prefixed by "install". It does not
run any of the install commands. Note that modinfo(8) can be used
to extract dependencies of a module from the module itself, but
knows nothing of aliases or install commands.
-s, --syslog
This option causes any error messages to go through the syslog
mechanism (as LOG_DAEMON with level LOG_NOTICE) rather than to
standard error. This is also automatically enabled when stderr is
unavailable.
This option is passed through install or remove commands to other
modprobe commands in the MODPROBE_OPTIONS environment variable.
-V, --version
Show version of program and exit.
-v, --verbose
Print messages about what the program is doing. Usually modprobe
only prints messages if something goes wrong.
This option is passed through install or remove commands to other
modprobe commands in the MODPROBE_OPTIONS environment variable.
The MODPROBE_OPTIONS environment variable can also be used to pass
arguments to modprobe.
This manual page originally Copyright 2002, Rusty Russell, IBM
Corporation. Maintained by Jon Masters and others.
modprobe.d(5), insmod(8), rmmod(8), lsmod(8), modinfo(8) depmod(8)
Jon Masters <jcm@jonmasters.org>
Developer
Robby Workman <rworkman@slackware.com>
Developer
Lucas De Marchi <lucas.de.marchi@gmail.com>
Developer
This page is part of the kmod (userspace tools for managing kernel
modules) project. Information about the project can be found at
[unknown -- if you know, please contact man-pages@man7.org] If you
have a bug report for this manual page, send it to
linux-modules@vger.kernel.org. This page was obtained from the
project's upstream Git repository
⟨git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git⟩ on
2018-02-02. (At that time, the date of the most recent commit that
was found in the repository was 2018-01-08.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
kmod 02/02/2018 MODPROBE(8)
Pages that refer to this page: delete_module(2), init_module(2), sk98lin(4), modprobe.d(5), modules.dep(5), modules-load.d(5), sysctl.d(5), depmod(8), insmod(8), kmod(8), lsmod(8), modinfo(8), rmmod(8)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|