|
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | VERSIONS | CONFORMING TO | NOTES | SEE ALSO | COLOPHON |
|
INIT_MODULE(2) Linux Programmer's Manual INIT_MODULE(2)
init_module, finit_module - load a kernel module
int init_module(void *module_image, unsigned long len,
const char *param_values);
int finit_module(int fd, const char *param_values,
int flags);
Note: glibc provides no header file declaration of init_module() and
no wrapper function for finit_module(); see NOTES.
init_module() loads an ELF image into kernel space, performs any
necessary symbol relocations, initializes module parameters to values
provided by the caller, and then runs the module's init function.
This system call requires privilege.
The module_image argument points to a buffer containing the binary
image to be loaded; len specifies the size of that buffer. The
module image should be a valid ELF image, built for the running
kernel.
The param_values argument is a string containing space-delimited
specifications of the values for module parameters (defined inside
the module using module_param() and module_param_array()). The
kernel parses this string and initializes the specified parameters.
Each of the parameter specifications has the form:
name[=value[,value...]]
The parameter name is one of those defined within the module using
module_param() (see the Linux kernel source file
include/linux/moduleparam.h). The parameter value is optional in the
case of bool and invbool parameters. Values for array parameters are
specified as a comma-separated list.
finit_module()
The finit_module() system call is like init_module(), but reads the
module to be loaded from the file descriptor fd. It is useful when
the authenticity of a kernel module can be determined from its
location in the filesystem; in cases where that is possible, the
overhead of using cryptographically signed modules to determine the
authenticity of a module can be avoided. The param_values argument
is as for init_module().
The flags argument modifies the operation of finit_module(). It is a
bit mask value created by ORing together zero or more of the
following flags:
MODULE_INIT_IGNORE_MODVERSIONS
Ignore symbol version hashes.
MODULE_INIT_IGNORE_VERMAGIC
Ignore kernel version magic.
There are some safety checks built into a module to ensure that it
matches the kernel against which it is loaded. These checks are
recorded when the module is built and verified when the module is
loaded. First, the module records a "vermagic" string containing the
kernel version number and prominent features (such as the CPU type).
Second, if the module was built with the CONFIG_MODVERSIONS
configuration option enabled, a version hash is recorded for each
symbol the module uses. This hash is based on the types of the
arguments and return value for the function named by the symbol. In
this case, the kernel version number within the "vermagic" string is
ignored, as the symbol version hashes are assumed to be sufficiently
reliable.
Using the MODULE_INIT_IGNORE_VERMAGIC flag indicates that the
"vermagic" string is to be ignored, and the
MODULE_INIT_IGNORE_MODVERSIONS flag indicates that the symbol version
hashes are to be ignored. If the kernel is built to permit forced
loading (i.e., configured with CONFIG_MODULE_FORCE_LOAD), then
loading continues, otherwise it fails with the error ENOEXEC as
expected for malformed modules.
On success, these system calls return 0. On error, -1 is returned
and errno is set appropriately.
EBADMSG (since Linux 3.7)
Module signature is misformatted.
EBUSY Timeout while trying to resolve a symbol reference by this
module.
EFAULT An address argument referred to a location that is outside the
process's accessible address space.
ENOKEY (since Linux 3.7)
Module signature is invalid or the kernel does not have a key
for this module. This error is returned only if the kernel
was configured with CONFIG_MODULE_SIG_FORCE; if the kernel was
not configured with this option, then an invalid or unsigned
module simply taints the kernel.
ENOMEM Out of memory.
EPERM The caller was not privileged (did not have the CAP_SYS_MODULE
capability), or module loading is disabled (see
/proc/sys/kernel/modules_disabled in proc(5)).
The following errors may additionally occur for init_module():
EEXIST A module with this name is already loaded.
EINVAL param_values is invalid, or some part of the ELF image in
module_image contains inconsistencies.
ENOEXEC
The binary image supplied in module_image is not an ELF image,
or is an ELF image that is invalid or for a different
architecture.
The following errors may additionally occur for finit_module():
EBADF The file referred to by fd is not opened for reading.
EFBIG The file referred to by fd is too large.
EINVAL flags is invalid.
ENOEXEC
fd does not refer to an open file.
In addition to the above errors, if the module's init function is
executed and returns an error, then init_module() or finit_module()
fails and errno is set to the value returned by the init function.
finit_module() is available since Linux 3.8.
init_module() and finit_module() are Linux-specific.
The init_module() system call is not supported by glibc. No
declaration is provided in glibc headers, but, through a quirk of
history, glibc versions before 2.23 did export an ABI for this system
call. Therefore, in order to employ this system call, it is (before
glibc 2.23) sufficient to manually declare the interface in your
code; alternatively, you can invoke the system call using syscall(2).
Glibc does not provide a wrapper for finit_module(); call it using
syscall(2).
Information about currently loaded modules can be found in
/proc/modules and in the file trees under the per-module
subdirectories under /sys/module.
See the Linux kernel source file include/linux/module.h for some
useful background information.
Linux 2.4 and earlier
In Linux 2.4 and earlier, the init_module() system call was rather
different:
#include <linux/module.h>
int init_module(const char *name, struct module *image);
(User-space applications can detect which version of init_module() is
available by calling query_module(); the latter call fails with the
error ENOSYS on Linux 2.6 and later.)
The older version of the system call loads the relocated module image
pointed to by image into kernel space and runs the module's init
function. The caller is responsible for providing the relocated
image (since Linux 2.6, the init_module() system call does the
relocation).
The module image begins with a module structure and is followed by
code and data as appropriate. Since Linux 2.2, the module structure
is defined as follows:
struct module {
unsigned long size_of_struct;
struct module *next;
const char *name;
unsigned long size;
long usecount;
unsigned long flags;
unsigned int nsyms;
unsigned int ndeps;
struct module_symbol *syms;
struct module_ref *deps;
struct module_ref *refs;
int (*init)(void);
void (*cleanup)(void);
const struct exception_table_entry *ex_table_start;
const struct exception_table_entry *ex_table_end;
#ifdef __alpha__
unsigned long gp;
#endif
};
All of the pointer fields, with the exception of next and refs, are
expected to point within the module body and be initialized as appro‐
priate for kernel space, that is, relocated with the rest of the mod‐
ule.
create_module(2), delete_module(2), query_module(2), lsmod(8),
modprobe(8)
This page is part of release 4.15 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 INIT_MODULE(2)
Pages that refer to this page: create_module(2), delete_module(2), get_kernel_syms(2), query_module(2), syscalls(2), unimplemented(2), systemd.exec(5), capabilities(7)
Copyright and license for this manual page
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|