|
NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | SEE ALSO | COLOPHON |
|
VGSPLIT(8) System Manager's Manual VGSPLIT(8)
vgsplit - Move physical volumes into a new or existing volume group
vgsplit option_args position_args
[ option_args ]
vgsplit moves one or more PVs from a source VG to a destination VG.
The PVs can be specified explicitly or implicitly by naming an LV, in
which case on PVs underlying the LV are moved.
If the destination VG does not exist, a new VG is created (command
options can be used to specify properties of the new VG, also see
vgcreate(8).)
LVs cannot be split between VGs; each LV must be entirely on the PVs
in the source or destination VG.
vgsplit can only move complete PVs. (See pvmove(8) for moving part of
a PV.)
Split a VG by specified PVs.
vgsplit VG VG PV ...
[ COMMON_OPTIONS ]
Split a VG by PVs in a specified LV.
vgsplit -n|--name LV VG VG
[ COMMON_OPTIONS ]
Common options for command:
[ -A|--autobackup y|n ]
[ -c|--clustered y|n ]
[ -l|--maxlogicalvolumes Number ]
[ -p|--maxphysicalvolumes Number ]
[ -M|--metadatatype lvm2|lvm1 ]
[ --alloc
contiguous|cling|cling_by_tags|normal|anywhere|inherit ]
[ --[vg]metadatacopies all|unmanaged|Number ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --lockopt String ]
[ --longhelp ]
[ --profile String ]
[ --version ]
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to
allocate Physical Extents (PEs) from the VG. Each VG and LV
has an allocation policy which can be changed with
vgchange/lvchange, or overriden on the command line. normal
applies common sense rules such as not placing parallel
stripes on the same PV. inherit applies the VG policy to an
LV. contiguous requires new PEs be placed adjacent to
existing PEs. cling places new PEs on the same PV as existing
PEs in the same stripe of the LV. If there are sufficient PEs
for an allocation, but normal does not use them, anywhere will
use them even if it reduces performance, e.g. by placing two
stripes on the same PV. Optional positional PV args on the
command line can also be used to limit which PVs the command
will use for allocation. See lvm(8) for more information
about allocation.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after
a change. Enabling this is strongly advised! See
vgcfgbackup(8) for more information.
-c|--clustered y|n
Specifies the clustered property of the new VG.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf
settings. The String arg uses the same format as lvm.conf, or
may use section/field syntax. See lvm.conf(5) for more
information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
-h|--help
Display help text.
--lockopt String
Used to pass options for special cases to lvmlockd. See
lvmlockd(8) for more information.
--longhelp
Display long help text.
-l|--maxlogicalvolumes Number
Sets the maximum number of LVs allowed in a VG.
-p|--maxphysicalvolumes Number
Sets the maximum number of PVs that can belong to the VG. The
value 0 removes any limitation. For large numbers of PVs,
also see options --pvmetadatacopies, and --vgmetadatacopies
for improving performance.
-M|--metadatatype lvm2|lvm1
Specifies the type of on-disk metadata to use. lvm2 (or just
2) is the current, standard format. lvm1 (or just 1) is a
historical format that can be used for accessing old data.
-n|--name String
Move only PVs used by the named LV.
--profile String
An alias for --commandprofile or --metadataprofile, depending
on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to
unusual error messages in multi-stage operations if a tool
relies on reading back metadata it believes has changed but
hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the
detail of messages sent to stdout and stderr.
--version
Display version information.
--[vg]metadatacopies all|unmanaged|Number
Number of copies of the VG metadata that are kept. VG
metadata is kept in VG metadata areas on PVs in the VG, i.e.
reserved space at the start and/or end of the PVs. Keeping a
copy of the VG metadata on every PV can reduce performance in
VGs containing a large number of PVs. When this number is set
to a non-zero value, LVM will automatically choose PVs on
which to store metadata, using the metadataignore flags on PVs
to achieve the specified number. The number can also be
replaced with special string values: unmanaged causes LVM to
not automatically manage the PV metadataignore flags. all
causes LVM to first clear the metadataignore flags on all PVs,
and then to become unmanaged.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
VG
Volume Group name. See lvm(8) for valid names.
PV
Physical Volume name, a device path under /dev. For commands
managing physical extents, a PV positional arg generally
accepts a suffix indicating a range (or multiple ranges) of
physical extents (PEs). When the first PE is omitted, it
defaults to the start of the device, and when the last PE is
omitted it defaults to end. Start and end range (inclusive):
PV[:PE-PE]... Start and length range (counting from 0):
PV[:PE+PE]...
String
See the option description for information about the string
content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of
capitalization, e.g. 'k' and 'K' both refer to 1024. The
default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: bBsSkKmMgGtTpPeE.
b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
m|M is megabytes, g|G is gigabytes, t|T is terabytes, p|P is
petabytes, e|E is exabytes. (This should not be confused with
the output control --units, where capital letters mean
multiple of 1000.)
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required
VG parameter.
lvm(8) lvm.conf(5) lvmconfig(8)
pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)
pvresize(8) pvs(8) pvscan(8)
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)
vgconvert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8)
vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8)
vgrename(8) vgs(8) vgscan(8) vgsplit(8)
lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8)
lvreduce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
blkdeactivate(8) lvmdump(8)
dmeventd(8) lvmetad(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
cmirrord(8) lvmdbusd(8)
lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for this
manual page, send it to linux-lvm@redhat.com. This page was obtained
from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2018-02-02. (At that time,
the date of the most recent commit that was found in the repository
was 2018-02-01.) If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-to-
date source for the page, or you have corrections or improvements to
the information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
Red Hat, Inc. LVM TOOLS 2.02.178(2)-git (2017-12-18) VGSPLIT(8)
Pages that refer to this page: lvmcache(7), lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|