|
NAME | SYNOPSIS | DESCRIPTION | ARGUMENTS | OPTIONS | EXAMPLES | SECURITY NOTICE | ISSUE FILES | FILES | BUGS | DIAGNOSTICS | AUTHORS | AVAILABILITY | COLOPHON |
|
AGETTY(8) System Administration AGETTY(8)
agetty - alternative Linux getty
agetty [options] port [baud_rate...] [term]
agetty opens a tty port, prompts for a login name and invokes the
/bin/login command. It is normally invoked by init(8).
agetty has several non-standard features that are useful for
hardwired and for dial-in lines:
· Adapts the tty settings to parity bits and to erase, kill,
end-of-line and uppercase characters when it reads a login
name. The program can handle 7-bit characters with even, odd,
none or space parity, and 8-bit characters with no parity.
The following special characters are recognized: Control-U
(kill); DEL and backspace (erase); carriage return and line
feed (end of line). See also the --erase-chars and
--kill-chars options.
· Optionally deduces the baud rate from the CONNECT messages
produced by Hayes(tm)-compatible modems.
· Optionally does not hang up when it is given an already opened
line (useful for call-back applications).
· Optionally does not display the contents of the /etc/issue
file.
· Optionally displays an alternative issue file or directory
instead of /etc/issue or /etc/issue.d.
· Optionally does not ask for a login name.
· Optionally invokes a non-standard login program instead of
/bin/login.
· Optionally turns on hardware flow control.
· Optionally forces the line to be local with no need for
carrier detect.
This program does not use the /etc/gettydefs (System V) or
/etc/gettytab (SunOS 4) files.
port A path name relative to the /dev directory. If a "-" is
specified, agetty assumes that its standard input is already
connected to a tty port and that a connection to a remote user
has already been established.
Under System V, a "-" port argument should be preceded by a
"--".
baud_rate,...
A comma-separated list of one or more baud rates. Each time
agetty receives a BREAK character it advances through the
list, which is treated as if it were circular.
Baud rates should be specified in descending order, so that
the null character (Ctrl-@) can also be used for baud-rate
switching.
This argument is optional and unnecessary for virtual
terminals.
The default for serial terminals is keep the current baud rate
(see --keep-baud) and if unsuccessful then default to '9600'.
term The value to be used for the TERM environment variable. This
overrides whatever init(8) may have set, and is inherited by
login and the shell.
The default is 'vt100', or 'linux' for Linux on a virtual
terminal, or 'hurd' for GNU Hurd on a virtual terminal.
-8, --8bits
Assume that the tty is 8-bit clean, hence disable parity
detection.
-a, --autologin username
Automatically log in the specified user without asking for a
username or password. Using this option causes an -f username
option and argument to be added to the /bin/login command
line. See --login-options, which can be used to modify this
option's behavior.
-c, --noreset
Do not reset terminal cflags (control modes). See termios(3)
for more details.
-E, --remote
Typically the login(1) command is given a remote hostname when
called by something such as telnetd(8). This option allows
agetty to pass what it is using for a hostname to login(1) for
use in utmp(5). See --host, login(1), and utmp(5).
If the --host fakehost option is given, then an -h fakehost
option and argument are added to the /bin/login command line.
If the --nohostname option is given, then an -H option is
added to the /bin/login command line.
See --login-options.
-f, --issue-file file|directory
Display the contents of file instead of /etc/issue. If the
specified path is a directory then displays all files with
.issue file extension in version-sort order from the
directory. This allows custom messages to be displayed on
different terminals. The --noissue option will override this
option.
-h, --flow-control
Enable hardware (RTS/CTS) flow control. It is left up to the
application to disable software (XON/XOFF) flow protocol where
appropriate.
-H, --host fakehost
Write the specified fakehost into the utmp file. Normally, no
login host is given, since agetty is used for local hardwired
connections and consoles. However, this option can be useful
for identifying terminal concentrators and the like.
-i, --noissue
Do not display the contents of /etc/issue (or other) before
writing the login prompt. Terminals or communications
hardware may become confused when receiving lots of text at
the wrong baud rate; dial-up scripts may fail if the login
prompt is preceded by too much text.
-I, --init-string initstring
Set an initial string to be sent to the tty or modem before
sending anything else. This may be used to initialize a
modem. Non-printable characters may be sent by writing their
octal code preceded by a backslash (\). For example, to send
a linefeed character (ASCII 10, octal 012), write \012.
-J, --noclear
Do not clear the screen before prompting for the login name.
By default the screen is cleared.
-l, --login-program login_program
Invoke the specified login_program instead of /bin/login.
This allows the use of a non-standard login program. Such a
program could, for example, ask for a dial-up password or use
a different password file. See --login-options.
-L, --local-line[=mode]
Control the CLOCAL line flag. The optional mode argument is
'auto', 'always' or 'never'. If the mode argument is omitted,
then the default is 'always'. If the --local-line option is
not given at all, then the default is 'auto'.
always Forces the line to be a local line with no need for
carrier detect. This can be useful when you have a
locally attached terminal where the serial line does
not set the carrier-detect signal.
never Explicitly clears the CLOCAL flag from the line setting
and the carrier-detect signal is expected on the line.
auto The agetty default. Does not modify the CLOCAL setting
and follows the setting enabled by the kernel.
-m, --extract-baud
Try to extract the baud rate from the CONNECT status message
produced by Hayes(tm)-compatible modems. These status
messages are of the form: "<junk><speed><junk>". agetty
assumes that the modem emits its status message at the same
speed as specified with (the first) baud_rate value on the
command line.
Since the --extract-baud feature may fail on heavily-loaded
systems, you still should enable BREAK processing by
enumerating all expected baud rates on the command line.
--list-speeds
Display supported baud rates. These are determined at
compilation time.
-n, --skip-login
Do not prompt the user for a login name. This can be used in
connection with the --login-program option to invoke a non-
standard login process such as a BBS system. Note that with
the --skip-login option, agetty gets no input from the user
who logs in and therefore will not be able to figure out
parity, character size, and newline processing of the
connection. It defaults to space parity, 7 bit characters,
and ASCII CR (13) end-of-line character. Beware that the
program that agetty starts (usually /bin/login) is run as
root.
-N, --nonewline
Do not print a newline before writing out /etc/issue.
-o, --login-options "login_options"
Options and arguments that are passed to login(1). Where \u
is replaced by the login name. For example:
--login-options '-h darkstar -- \u'
See --autologin, --login-program and --remote.
Please read the SECURITY NOTICE below before using this
option.
-p, --login-pause
Wait for any key before dropping to the login prompt. Can be
combined with --autologin to save memory by lazily spawning
shells.
-r, --chroot directory
Change root to the specified directory.
-R, --hangup
Call vhangup() to do a virtual hangup of the specified
terminal.
-s, --keep-baud
Try to keep the existing baud rate. The baud rates from the
command line are used when agetty receives a BREAK character.
-t, --timeout timeout
Terminate if no user name could be read within timeout
seconds. Use of this option with hardwired terminal lines is
not recommended.
-U, --detect-case
Turn on support for detecting an uppercase-only terminal.
This setting will detect a login name containing only capitals
as indicating an uppercase-only terminal and turn on some
upper-to-lower case conversions. Note that this has no
support for any Unicode characters.
-w, --wait-cr
Wait for the user or the modem to send a carriage-return or a
linefeed character before sending the /etc/issue file (or
others) and the login prompt. This is useful with the
--init-string option.
--nohints
Do not print hints about Num, Caps and Scroll Locks.
--nohostname
By default the hostname will be printed. With this option
enabled, no hostname at all will be shown.
--long-hostname
By default the hostname is only printed until the first dot.
With this option enabled, the fully qualified hostname by
gethostname(3P) or (if not found) by getaddrinfo(3) is shown.
--erase-chars string
This option specifies additional characters that should be
interpreted as a backspace ("ignore the previous character")
when the user types the login name. The default additional
´erase´ has been ´#´, but since util-linux 2.23 no additional
erase characters are enabled by default.
--kill-chars string
This option specifies additional characters that should be
interpreted as a kill ("ignore all previous characters") when
the user types the login name. The default additional ´kill´
has been ´@´, but since util-linux 2.23 no additional kill
characters are enabled by default.
--chdir directory
Change directory before the login.
--delay number
Sleep seconds before open tty.
--nice number
Run login with this priority.
--reload
Ask all running agetty instances to reload and update their
displayed prompts, if the user has not yet commenced logging
in. After doing so the command will exit. This feature might
be unsupported on systems without Linux inotify(7).
--version
Display version information and exit.
--help Display help text and exit.
This section shows examples for the process field of an entry in the
/etc/inittab file. You'll have to prepend appropriate values for the
other fields. See inittab(5) for more details.
For a hardwired line or a console tty:
/sbin/agetty 9600 ttyS1
For a directly connected terminal without proper carrier-detect
wiring (try this if your terminal just sleeps instead of giving you a
password: prompt):
/sbin/agetty --local-line 9600 ttyS1 vt100
For an old-style dial-in line with a 9600/2400/1200 baud modem:
/sbin/agetty --extract-baud --timeout 60 ttyS1 9600,2400,1200
For a Hayes modem with a fixed 115200 bps interface to the machine
(the example init string turns off modem echo and result codes, makes
modem/computer DCD track modem/modem DCD, makes a DTR drop cause a
disconnection, and turns on auto-answer after 1 ring):
/sbin/agetty --wait-cr --init-string 'ATE0Q1&D2&C1S0=1 15' 115200 ttyS1
If you use the --login-program and --login-options options, be aware
that a malicious user may try to enter lognames with embedded
options, which then get passed to the used login program. Agetty
does check for a leading "-" and makes sure the logname gets passed
as one parameter (so embedded spaces will not create yet another
parameter), but depending on how the login binary parses the command
line that might not be sufficient. Check that the used login program
cannot be abused this way.
Some programs use "--" to indicate that the rest of the commandline
should not be interpreted as options. Use this feature if available
by passing "--" before the username gets passed by \u.
The default issue file is /etc/issue. If the file exists then agetty
also checks for /etc/issue.d directory. The directory is optional
extension to the default issue file and content of the directory is
printed after /etc/issue content. If the /etc/issue does not exist
than the directory is ignored. All files with .issue extension from
the directory are printed in version-sort order. The directory allow
to maintain 3rd-party messages independently on the primary system
/etc/issue file.
The default path maybe overrided by --issue-file option. In this case
specified path has to be file or directory and the default /etc/issue
as well as /etc/issue.d are ignored.
The issue files may contain certain escape codes to display the
system name, date, time etcetera. All escape codes consist of a
backslash (\) immediately followed by one of the characters listed
below.
4 or 4{interface}
Insert the IPv4 address of the specified network interface
(for example: \4{eth0}). If the interface argument is not
specified, then select the first fully configured (UP, non-
LOCALBACK, RUNNING) interface. If not any configured
interface is found, fall back to the IP address of the
machine's hostname.
6 or 6{interface}
The same as \4 but for IPv6.
b Insert the baudrate of the current line.
d Insert the current date.
e or e{name}
Translate the human-readable name to an escape sequence and
insert it (for example: \e{red}Alert text.\e{reset}). If the
name argument is not specified, then insert \033. The
currently supported names are: black, blink, blue, bold,
brown, cyan, darkgray, gray, green, halfbright, lightblue,
lightcyan, lightgray, lightgreen, lightmagenta, lightred,
magenta, red, reset, reverse, and yellow. All unknown names
are silently ignored.
s Insert the system name (the name of the operating system).
Same as 'uname -s'. See also the \S escape code.
S or S{VARIABLE}
Insert the VARIABLE data from /etc/os-release. If this file
does not exist then fall back to /usr/lib/os-release. If the
VARIABLE argument is not specified, then use PRETTY_NAME from
the file or the system name (see \s). This escape code allows
to keep /etc/issue distribution and release independent. Note
that \S{ANSI_COLOR} is converted to the real terminal escape
sequence.
l Insert the name of the current tty line.
m Insert the architecture identifier of the machine. Same as
'uname -m'.
n Insert the nodename of the machine, also known as the
hostname. Same as 'uname -n'.
o Insert the NIS domainname of the machine. Same as 'hostname
-d'.
O Insert the DNS domainname of the machine.
r Insert the release number of the OS. Same as 'uname -r'.
t Insert the current time.
u Insert the number of current users logged in.
U Insert the string "1 user" or "<n> users" where <n> is the
number of current users logged in.
v Insert the version of the OS, that is, the build-date and
such.
An example. On my system, the following /etc/issue file:
This is \n.\o (\s \m \r) \t
displays as:
This is thingol.orcan.dk (Linux i386 1.1.9) 18:29:30
/var/run/utmp
the system status file.
/etc/issue
printed before the login prompt.
/etc/os-release /usr/lib/os-release
operating system identification data.
/dev/console
problem reports (if syslog(3) is not used).
/etc/inittab
init(8) configuration file for SysV-style init daemon.
The baud-rate detection feature (the --extract-baud option) requires
that agetty be scheduled soon enough after completion of a dial-in
call (within 30 ms with modems that talk at 2400 baud). For
robustness, always use the --extract-baud option in combination with
a multiple baud rate command-line argument, so that BREAK processing
is enabled.
The text in the /etc/issue file (or other) and the login prompt are
always output with 7-bit characters and space parity.
The baud-rate detection feature (the --extract-baud option) requires
that the modem emits its status message after raising the DCD line.
Depending on how the program was configured, all diagnostics are
written to the console device or reported via the syslog(3) facility.
Error messages are produced if the port argument does not specify a
terminal device; if there is no utmp entry for the current process
(System V only); and so on.
Werner Fink ⟨werner@suse.de⟩
Karel Zak ⟨kzak@redhat.com⟩
The original agetty for serial terminals was written by W.Z. Venema
<wietse@wzv.win.tue.nl> and ported to Linux by Peter Orbaek
<poe@daimi.aau.dk>.
The agetty command is part of the util-linux package and is available
from https://www.kernel.org/pub/linux/utils/util-linux/.
This page is part of the util-linux (a random collection of Linux
utilities) project. Information about the project can be found at
⟨https://www.kernel.org/pub/linux/utils/util-linux/⟩. If you have a
bug report for this manual page, send it to
util-linux@vger.kernel.org. This page was obtained from the
project's upstream Git repository
⟨git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git⟩ on
2018-02-02. (At that time, the date of the most recent commit that
was found in the repository was 2018-02-01.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
util-linux February 2016 AGETTY(8)
Pages that refer to this page: tty(4), ttyS(4), issue(5), systemd.exec(5), ttytype(5), utmp(5), systemd-getty-generator(8)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|