|
NAME | SYNOPSIS | DESCRIPTION | ATTRIBUTES | CONFORMING TO | NOTES | SEE ALSO | COLOPHON |
|
SYSLOG(3) Linux Programmer's Manual SYSLOG(3)
closelog, openlog, syslog, vsyslog - send messages to the system log‐
ger
#include <syslog.h>
void openlog(const char *ident, int option, int facility);
void syslog(int priority, const char *format, ...);
void closelog(void);
void vsyslog(int priority, const char *format, va_list ap);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
vsyslog():
Since glibc 2.19:
_DEFAULT_SOURCE
Glibc 2.19 and earlier:
_BSD_SOURCE
openlog()
openlog() opens a connection to the system logger for a program.
The string pointed to by ident is prepended to every message, and is
typically set to the program name. If ident is NULL, the program
name is used. (POSIX.1-2008 does not specify the behavior when ident
is NULL.)
The option argument specifies flags which control the operation of
openlog() and subsequent calls to syslog(). The facility argument
establishes a default to be used if none is specified in subsequent
calls to syslog(). The values that may be specified for option and
facility are described below.
The use of openlog() is optional; it will automatically be called by
syslog() if necessary, in which case ident will default to NULL.
syslog() and vsyslog()
syslog() generates a log message, which will be distributed by
syslogd(8).
The priority argument is formed by ORing together a facility value
and a level value (described below). If no facility value is ORed
into priority, then the default value set by openlog() is used, or,
if there was no preceding openlog() call, a default of LOG_USER is
employed.
The remaining arguments are a format, as in printf(3), and any
arguments required by the format, except that the two-character
sequence %m will be replaced by the error message string
strerror(errno). The format string need not include a terminating
newline character.
The function vsyslog() performs the same task as syslog() with the
difference that it takes a set of arguments which have been obtained
using the stdarg(3) variable argument list macros.
closelog()
closelog() closes the file descriptor being used to write to the
system logger. The use of closelog() is optional.
Values for option
The option argument to openlog() is a bit mask constructed by ORing
together any of the following values:
LOG_CONS Write directly to the system console if there is an
error while sending to the system logger.
LOG_NDELAY Open the connection immediately (normally, the
connection is opened when the first message is
logged). This may be useful, for example, if a
subsequent chroot(2) would make the pathname used
internally by the logging facility unreachable.
LOG_NOWAIT Don't wait for child processes that may have been
created while logging the message. (The GNU C library
does not create a child process, so this option has no
effect on Linux.)
LOG_ODELAY The converse of LOG_NDELAY; opening of the connection
is delayed until syslog() is called. (This is the
default, and need not be specified.)
LOG_PERROR (Not in POSIX.1-2001 or POSIX.1-2008.) Also log the
message to stderr.
LOG_PID Include the caller's PID with each message.
Values for facility
The facility argument is used to specify what type of program is
logging the message. This lets the configuration file specify that
messages from different facilities will be handled differently.
LOG_AUTH security/authorization messages
LOG_AUTHPRIV security/authorization messages (private)
LOG_CRON clock daemon (cron and at)
LOG_DAEMON system daemons without separate facility value
LOG_FTP ftp daemon
LOG_KERN kernel messages (these can't be generated from user
processes)
LOG_LOCAL0 through LOG_LOCAL7
reserved for local use
LOG_LPR line printer subsystem
LOG_MAIL mail subsystem
LOG_NEWS USENET news subsystem
LOG_SYSLOG messages generated internally by syslogd(8)
LOG_USER (default)
generic user-level messages
LOG_UUCP UUCP subsystem
Values for level
This determines the importance of the message. The levels are, in
order of decreasing importance:
LOG_EMERG system is unusable
LOG_ALERT action must be taken immediately
LOG_CRIT critical conditions
LOG_ERR error conditions
LOG_WARNING warning conditions
LOG_NOTICE normal, but significant, condition
LOG_INFO informational message
LOG_DEBUG debug-level message
The function setlogmask(3) can be used to restrict logging to
specified levels only.
For an explanation of the terms used in this section, see
attributes(7).
┌──────────────────────┬───────────────┬────────────────────┐
│Interface │ Attribute │ Value │
├──────────────────────┼───────────────┼────────────────────┤
│openlog(), closelog() │ Thread safety │ MT-Safe │
├──────────────────────┼───────────────┼────────────────────┤
│syslog(), vsyslog() │ Thread safety │ MT-Safe env locale │
└──────────────────────┴───────────────┴────────────────────┘
The functions openlog(), closelog(), and syslog() (but not vsyslog())
are specified in SUSv2, POSIX.1-2001, and POSIX.1-2008.
POSIX.1-2001 specifies only the LOG_USER and LOG_LOCAL* values for
facility. However, with the exception of LOG_AUTHPRIV and LOG_FTP,
the other facility values appear on most UNIX systems.
The LOG_PERROR value for option is not specified by POSIX.1-2001 or
POSIX.1-2008, but is available in most versions of UNIX.
The argument ident in the call of openlog() is probably stored as-is.
Thus, if the string it points to is changed, syslog() may start
prepending the changed string, and if the string it points to ceases
to exist, the results are undefined. Most portable is to use a
string constant.
Never pass a string with user-supplied data as a format, use the
following instead:
syslog(priority, "%s", string);
journalctl(1), logger(1), setlogmask(3), syslog.conf(5), syslogd(8)
This page is part of release 4.15 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 SYSLOG(3)
Pages that refer to this page: inotifywait(1), journalctl(1), logger(1), systemd(1), systemd-cat(1), syslog(2), pam_syslog(3), pmnotifyerr(3), sd-daemon(3), sd_journal_print(3), sd_journal_stream_fd(3), selinux_restorecon(3), setlogmask(3), limits.conf(5), pam.conf(5), rsyslog.conf(5), systemd.exec(5), time.conf(5), file-hierarchy(7), systemd.generator(7), agetty(8), clvmd(8), cmirrord(8), cron(8), PAM(8), pam_access(8), pam_cracklib(8), pam_env(8), pam_keyinit(8), pam_pwhistory(8), pam_selinux(8), pam_sepermit(8), pam_tally2(8), pam_tally(8), pam_time(8), pam_timestamp(8), pam_unix(8), pam_warn(8), rsyslogd(8), slapd(8), systemd-journald.service(8)
Copyright and license for this manual page
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|