|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OUTPUT FORMAT | EXAMPLE | DIAGNOSTICS | SEE ALSO | AUTHOR | ACKNOWLEDGEMENTS | COLOPHON |
|
LDAPSEARCH(1) General Commands Manual LDAPSEARCH(1)
ldapsearch - LDAP search tool
ldapsearch [-V[V]] [-d debuglevel] [-n] [-v] [-c] [-u] [-t[t]]
[-T path] [-F prefix] [-A] [-L[L[L]]] [-S attribute] [-b searchbase]
[-s {base|one|sub|children}] [-a {never|always|search|find}]
[-l timelimit] [-z sizelimit] [-f file] [-M[M]] [-x] [-D binddn] [-W]
[-w passwd] [-y passwdfile] [-H ldapuri] [-h ldaphost] [-p ldapport]
[-P {2|3}] [-e [!]ext[=extparam]] [-E [!]ext[=extparam]]
[-o opt[=optparam]] [-O security-properties] [-I] [-Q] [-N]
[-U authcid] [-R realm] [-X authzid] [-Y mech] [-Z[Z]] filter
[attrs...]
ldapsearch is a shell-accessible interface to the ldap_search_ext(3)
library call.
ldapsearch opens a connection to an LDAP server, binds, and performs
a search using specified parameters. The filter should conform to
the string representation for search filters as defined in RFC 4515.
If not provided, the default filter, (objectClass=*), is used.
If ldapsearch finds one or more entries, the attributes specified by
attrs are returned. If * is listed, all user attributes are
returned. If + is listed, all operational attributes are returned.
If no attrs are listed, all user attributes are returned. If only
1.1 is listed, no attributes will be returned.
The search results are displayed using an extended version of LDIF.
Option -L controls the format of the output.
-V[V] Print version info. If -VV is given, exit after providing
version info. Otherwise proceed with the specified search
-d debuglevel
Set the LDAP debugging level to debuglevel. ldapsearch must
be compiled with LDAP_DEBUG defined for this option to have
any effect.
-n Show what would be done, but don't actually perform the
search. Useful for debugging in conjunction with -v.
-v Run in verbose mode, with many diagnostics written to standard
output.
-c Continuous operation mode. Errors are reported, but ldapsearch
will continue with searches. The default is to exit after
reporting an error. Only useful in conjunction with -f.
-u Include the User Friendly Name form of the Distinguished Name
(DN) in the output.
-t[t] A single -t writes retrieved non-printable values to a set of
temporary files. This is useful for dealing with values
containing non-character data such as jpegPhoto or audio. A
second -t writes all retrieved values to files.
-T path
Write temporary files to directory specified by path (default:
/var/tmp/)
-F prefix
URL prefix for temporary files. Default is file://path where
path is /var/tmp/ or specified with -T.
-A Retrieve attributes only (no values). This is useful when you
just want to see if an attribute is present in an entry and
are not interested in the specific values.
-L Search results are display in LDAP Data Interchange Format
detailed in ldif(5). A single -L restricts the output to
LDIFv1.
A second -L disables comments. A third -L disables printing
of the LDIF version. The default is to use an extended
version of LDIF.
-S attribute
Sort the entries returned based on attribute. The default is
not to sort entries returned. If attribute is a zero-length
string (""), the entries are sorted by the components of their
Distinguished Name. See ldap_sort(3) for more details. Note
that ldapsearch normally prints out entries as it receives
them. The use of the -S option defeats this behavior, causing
all entries to be retrieved, then sorted, then printed.
-b searchbase
Use searchbase as the starting point for the search instead of
the default.
-s {base|one|sub|children}
Specify the scope of the search to be one of base, one, sub,
or children to specify a base object, one-level, subtree, or
children search. The default is sub. Note: children scope
requires LDAPv3 subordinate feature extension.
-a {never|always|search|find}
Specify how aliases dereferencing is done. Should be one of
never, always, search, or find to specify that aliases are
never dereferenced, always dereferenced, dereferenced when
searching, or dereferenced only when locating the base object
for the search. The default is to never dereference aliases.
-l timelimit
wait at most timelimit seconds for a search to complete. A
timelimit of 0 (zero) or none means no limit. A timelimit of
max means the maximum integer allowable by the protocol. A
server may impose a maximal timelimit which only the root user
may override.
-z sizelimit
retrieve at most sizelimit entries for a search. A sizelimit
of 0 (zero) or none means no limit. A sizelimit of max means
the maximum integer allowable by the protocol. A server may
impose a maximal sizelimit which only the root user may
override.
-f file
Read a series of lines from file, performing one LDAP search
for each line. In this case, the filter given on the command
line is treated as a pattern where the first and only
occurrence of %s is replaced with a line from file. Any other
occurrence of the the % character in the pattern will be
regarded as an error. Where it is desired that the search
filter include a % character, the character should be encoded
as \25 (see RFC 4515). If file is a single - character, then
the lines are read from standard input. ldapsearch will exit
when the first non-successful search result is returned,
unless -c is used.
-M[M] Enable manage DSA IT control. -MM makes control critical.
-x Use simple authentication instead of SASL.
-D binddn
Use the Distinguished Name binddn to bind to the LDAP
directory. For SASL binds, the server is expected to ignore
this value.
-W Prompt for simple authentication. This is used instead of
specifying the password on the command line.
-w passwd
Use passwd as the password for simple authentication.
-y passwdfile
Use complete contents of passwdfile as the password for simple
authentication.
-H ldapuri
Specify URI(s) referring to the ldap server(s); a list of URI,
separated by whitespace or commas is expected; only the
protocol/host/port fields are allowed. As an exception, if no
host/port is specified, but a DN is, the DN is used to look up
the corresponding host(s) using the DNS SRV records, according
to RFC 2782. The DN must be a non-empty sequence of AVAs
whose attribute type is "dc" (domain component), and must be
escaped according to RFC 2396.
-h ldaphost
Specify an alternate host on which the ldap server is running.
Deprecated in favor of -H.
-p ldapport
Specify an alternate TCP port where the ldap server is
listening. Deprecated in favor of -H.
-P {2|3}
Specify the LDAP protocol version to use.
-e [!]ext[=extparam]
-E [!]ext[=extparam]
Specify general extensions with -e and search extensions with
-E. ´!´ indicates criticality.
General extensions:
[!]assert=<filter> (an RFC 4515 Filter)
!authzid=<authzid> ("dn:<dn>" or "u:<user>")
[!]bauthzid (RFC 3829 authzid control)
[!]chaining[=<resolve>[/<cont>]]
[!]manageDSAit
[!]noop
ppolicy
[!]postread[=<attrs>] (a comma-separated attribute list)
[!]preread[=<attrs>] (a comma-separated attribute list)
[!]relax
sessiontracking[=<username>]
abandon,cancel,ignore (SIGINT sends abandon/cancel,
or ignores response; if critical, doesn't wait for SIGINT.
not really controls)
Search extensions:
!dontUseCopy
[!]domainScope (domain scope)
[!]mv=<filter> (matched values filter)
[!]pr=<size>[/prompt|noprompt] (paged results/prompt)
[!]sss=[-]<attr[:OID]>[/[-]<attr[:OID]>...] (server side sorting)
[!]subentries[=true|false] (subentries)
[!]sync=ro[/<cookie>] (LDAP Sync refreshOnly)
rp[/<cookie>][/<slimit>] (LDAP Sync refreshAndPersist)
[!]vlv=<before>/<after>(/<offset>/<count>|:<value>) (virtual list view)
[!]deref=derefAttr:attr[,attr[...]][;derefAttr:attr[,attr[...]]]
[!]<oid>[=<value>]
-o opt[=optparam]
Specify general options.
General options:
nettimeout=<timeout> (in seconds, or "none" or "max")
ldif-wrap=<width> (in columns, or "no" for no wrapping)
-O security-properties
Specify SASL security properties.
-I Enable SASL Interactive mode. Always prompt. Default is to
prompt only as needed.
-Q Enable SASL Quiet mode. Never prompt.
-N Do not use reverse DNS to canonicalize SASL host name.
-U authcid
Specify the authentication ID for SASL bind. The form of the
ID depends on the actual SASL mechanism used.
-R realm
Specify the realm of authentication ID for SASL bind. The form
of the realm depends on the actual SASL mechanism used.
-X authzid
Specify the requested authorization ID for SASL bind. authzid
must be one of the following formats: dn:<distinguished name>
or u:<username>
-Y mech
Specify the SASL mechanism to be used for authentication. If
it's not specified, the program will choose the best mechanism
the server knows.
-Z[Z] Issue StartTLS (Transport Layer Security) extended operation.
If you use -ZZ, the command will require the operation to be
successful.
If one or more entries are found, each entry is written to standard
output in LDAP Data Interchange Format or ldif(5):
version: 1
# bjensen, example, net
dn: uid=bjensen,dc=example,dc=net
objectClass: person
objectClass: dcObject
uid: bjensen
cn: Barbara Jensen
sn: Jensen
...
If the -t option is used, the URI of a temporary file is used in
place of the actual value. If the -A option is given, only the
"attributename" part is written.
The following command:
ldapsearch -LLL "(sn=smith)" cn sn telephoneNumber
will perform a subtree search (using the default search base and
other parameters defined in ldap.conf(5)) for entries with a surname
(sn) of smith. The common name (cn), surname (sn) and
telephoneNumber values will be retrieved and printed to standard
output. The output might look something like this if two entries are
found:
dn: uid=jts,dc=example,dc=com
cn: John Smith
cn: John T. Smith
sn: Smith
sn;lang-en: Smith
sn;lang-de: Schmidt
telephoneNumber: 1 555 123-4567
dn: uid=sss,dc=example,dc=com
cn: Steve Smith
cn: Steve S. Smith
sn: Smith
sn;lang-en: Smith
sn;lang-de: Schmidt
telephoneNumber: 1 555 765-4321
The command:
ldapsearch -LLL -u -t "(uid=xyz)" jpegPhoto audio
will perform a subtree search using the default search base for
entries with user id of "xyz". The user friendly form of the entry's
DN will be output after the line that contains the DN itself, and the
jpegPhoto and audio values will be retrieved and written to temporary
files. The output might look like this if one entry with one value
for each of the requested attributes is found:
dn: uid=xyz,dc=example,dc=com
ufn: xyz, example, com
audio:< file:///tmp/ldapsearch-audio-a19924
jpegPhoto:< file:///tmp/ldapsearch-jpegPhoto-a19924
This command:
ldapsearch -LLL -s one -b "c=US" "(o=University*)" o description
will perform a one-level search at the c=US level for all entries
whose organization name (o) begins with University. The organization
name and description attribute values will be retrieved and printed
to standard output, resulting in output similar to this:
dn: o=University of Alaska Fairbanks,c=US
o: University of Alaska Fairbanks
description: Preparing Alaska for a brave new yesterday
description: leaf node only
dn: o=University of Colorado at Boulder,c=US
o: University of Colorado at Boulder
description: No personnel information
description: Institution of education and research
dn: o=University of Colorado at Denver,c=US
o: University of Colorado at Denver
o: UCD
o: CU/Denver
o: CU-Denver
description: Institute for Higher Learning and Research
dn: o=University of Florida,c=US
o: University of Florida
o: UFl
description: Warper of young minds
...
Exit status is zero if no errors occur. Errors result in a non-zero
exit status and a diagnostic message being written to standard error.
ldapadd(1), ldapdelete(1), ldapmodify(1), ldapmodrdn(1),
ldap.conf(5), ldif(5), ldap(3), ldap_search_ext(3), ldap_sort(3)
The OpenLDAP Project <http://www.openldap.org/>
OpenLDAP Software is developed and maintained by The OpenLDAP Project
<http://www.openldap.org/>. OpenLDAP Software is derived from the
University of Michigan LDAP 3.3 Release.
This page is part of the OpenLDAP (an open source implementation of
the Lightweight Directory Access Protocol) project. Information
about the project can be found at ⟨http://www.openldap.org/⟩. If you
have a bug report for this manual page, see
⟨http://www.openldap.org/its/⟩. This page was obtained from the
project's upstream Git repository
⟨git://git.openldap.org/openldap.git⟩ on 2018-02-02. (At that time,
the date of the most recent commit that was found in the repository
was 2018-01-30.) If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-to-
date source for the page, or you have corrections or improvements to
the information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
OpenLDAP LDVERSION RELEASEDATE LDAPSEARCH(1)
Pages that refer to this page: ldapdelete(1), ldapmodify(1), ldapmodrdn(1), pmdads389(1), ldap.conf(5), ldif(5), slapo-valsort(5)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|