|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | INPUT FORMAT | EXAMPLES | DIAGNOSTICS | SEE ALSO | AUTHOR | ACKNOWLEDGEMENTS | COLOPHON |
|
LDAPMODIFY(1) General Commands Manual LDAPMODIFY(1)
ldapmodify, ldapadd - LDAP modify entry and LDAP add entry tools
ldapmodify [-V[V]] [-d debuglevel] [-n] [-v] [-a] [-c] [-f file]
[-S file] [-M[M]] [-x] [-D binddn] [-W] [-w passwd] [-y passwdfile]
[-H ldapuri] [-h ldaphost] [-p ldapport] [-P {2|3}]
[-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]]
[-O security-properties] [-I] [-Q] [-N] [-U authcid] [-R realm]
[-X authzid] [-Y mech] [-Z[Z]]
ldapadd [-V[V]] [-d debuglevel] [-n] [-v] [-c] [-f file] [-S file]
[-M[M]] [-x] [-D binddn] [-W] [-w passwd] [-y passwdfile]
[-H ldapuri] [-h ldaphost] [-p ldapport] [-P {2|3}]
[-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]]
[-O security-properties] [-I] [-Q] [-N] [-U authcid] [-R realm]
[-X authzid] [-Y mech] [-Z[Z]]
ldapmodify is a shell-accessible interface to the ldap_add_ext(3),
ldap_modify_ext(3), ldap_delete_ext(3) and ldap_rename(3). library
calls. ldapadd is implemented as a hard link to the ldapmodify tool.
When invoked as ldapadd the -a (add new entry) flag is turned on
automatically.
ldapmodify opens a connection to an LDAP server, binds, and modifies
or adds entries. The entry information is read from standard input
or from file through the use of the -f option.
-V[V] Print version info. If -VV is given, only the version
information is printed.
-d debuglevel
Set the LDAP debugging level to debuglevel. ldapmodify must
be compiled with LDAP_DEBUG defined for this option to have
any effect.
-n Show what would be done, but don't actually modify entries.
Useful for debugging in conjunction with -v.
-v Use verbose mode, with many diagnostics written to standard
output.
-a Add new entries. The default for ldapmodify is to modify
existing entries. If invoked as ldapadd, this flag is always
set.
-c Continuous operation mode. Errors are reported, but
ldapmodify will continue with modifications. The default is
to exit after reporting an error.
-f file
Read the entry modification information from file instead of
from standard input.
-S file
Add or change records which were skipped due to an error are
written to file and the error message returned by the server
is added as a comment. Most useful in conjunction with -c.
-M[M] Enable manage DSA IT control. -MM makes control critical.
-x Use simple authentication instead of SASL.
-D binddn
Use the Distinguished Name binddn to bind to the LDAP
directory. For SASL binds, the server is expected to ignore
this value.
-W Prompt for simple authentication. This is used instead of
specifying the password on the command line.
-w passwd
Use passwd as the password for simple authentication.
-y passwdfile
Use complete contents of passwdfile as the password for simple
authentication.
-H ldapuri
Specify URI(s) referring to the ldap server(s); only the
protocol/host/port fields are allowed; a list of URI,
separated by whitespace or commas is expected.
-h ldaphost
Specify an alternate host on which the ldap server is running.
Deprecated in favor of -H.
-p ldapport
Specify an alternate TCP port where the ldap server is
listening. Deprecated in favor of -H.
-P {2|3}
Specify the LDAP protocol version to use.
-e [!]ext[=extparam]
-E [!]ext[=extparam]
Specify general extensions with -e and modify extensions with
-E. ´!´ indicates criticality.
General extensions:
[!]assert=<filter> (an RFC 4515 Filter)
!authzid=<authzid> ("dn:<dn>" or "u:<user>")
[!]bauthzid (RFC 3829 authzid control)
[!]chaining[=<resolve>[/<cont>]]
[!]manageDSAit
[!]noop
ppolicy
[!]postread[=<attrs>] (a comma-separated attribute list)
[!]preread[=<attrs>] (a comma-separated attribute list)
[!]relax
sessiontracking[=<username>]
abandon,cancel,ignore (SIGINT sends abandon/cancel,
or ignores response; if critical, doesn't wait for SIGINT.
not really controls)
Modify extensions:
[!]txn[=abort|commit]
-o opt[=optparam]]
Specify general options.
General options:
nettimeout=<timeout> (in seconds, or "none" or "max")
ldif-wrap=<width> (in columns, or "no" for no wrapping)
-O security-properties
Specify SASL security properties.
-I Enable SASL Interactive mode. Always prompt. Default is to
prompt only as needed.
-Q Enable SASL Quiet mode. Never prompt.
-N Do not use reverse DNS to canonicalize SASL host name.
-U authcid
Specify the authentication ID for SASL bind. The form of the
ID depends on the actual SASL mechanism used.
-R realm
Specify the realm of authentication ID for SASL bind. The form
of the realm depends on the actual SASL mechanism used.
-X authzid
Specify the requested authorization ID for SASL bind. authzid
must be one of the following formats: dn:<distinguished name>
or u:<username>
-Y mech
Specify the SASL mechanism to be used for authentication. If
it's not specified, the program will choose the best mechanism
the server knows.
-Z[Z] Issue StartTLS (Transport Layer Security) extended operation.
If you use -ZZ, the command will require the operation to be
successful.
The contents of file (or standard input if no -f flag is given on the
command line) must conform to the format defined in ldif(5) (LDIF as
defined in RFC 2849).
Assuming that the file /tmp/entrymods exists and has the contents:
dn: cn=Modify Me,dc=example,dc=com
changetype: modify
replace: mail
mail: modme@example.com
-
add: title
title: Grand Poobah
-
add: jpegPhoto
jpegPhoto:< file:///tmp/modme.jpeg
-
delete: description
-
the command:
ldapmodify -f /tmp/entrymods
will replace the contents of the "Modify Me" entry's mail attribute
with the value "modme@example.com", add a title of "Grand Poobah",
and the contents of the file "/tmp/modme.jpeg" as a jpegPhoto, and
completely remove the description attribute.
Assuming that the file /tmp/newentry exists and has the contents:
dn: cn=Barbara Jensen,dc=example,dc=com
objectClass: person
cn: Barbara Jensen
cn: Babs Jensen
sn: Jensen
title: the world's most famous mythical manager
mail: bjensen@example.com
uid: bjensen
the command:
ldapadd -f /tmp/newentry
will add a new entry for Babs Jensen, using the values from the file
/tmp/newentry.
Assuming that the file /tmp/entrymods exists and has the contents:
dn: cn=Barbara Jensen,dc=example,dc=com
changetype: delete
the command:
ldapmodify -f /tmp/entrymods
will remove Babs Jensen's entry.
Exit status is zero if no errors occur. Errors result in a non-zero
exit status and a diagnostic message being written to standard error.
ldapadd(1), ldapdelete(1), ldapmodrdn(1), ldapsearch(1),
ldap.conf(5), ldap(3), ldap_add_ext(3), ldap_delete_ext(3),
ldap_modify_ext(3), ldap_modrdn_ext(3), ldif(5).
The OpenLDAP Project <http://www.openldap.org/>
OpenLDAP Software is developed and maintained by The OpenLDAP Project
<http://www.openldap.org/>. OpenLDAP Software is derived from the
University of Michigan LDAP 3.3 Release.
This page is part of the OpenLDAP (an open source implementation of
the Lightweight Directory Access Protocol) project. Information
about the project can be found at ⟨http://www.openldap.org/⟩. If you
have a bug report for this manual page, see
⟨http://www.openldap.org/its/⟩. This page was obtained from the
project's upstream Git repository
⟨git://git.openldap.org/openldap.git⟩ on 2018-02-02. (At that time,
the date of the most recent commit that was found in the repository
was 2018-01-30.) If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-to-
date source for the page, or you have corrections or improvements to
the information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
OpenLDAP LDVERSION RELEASEDATE LDAPMODIFY(1)
Pages that refer to this page: ldapdelete(1), ldapmodify(1), ldapmodrdn(1), ldapsearch(1), ldif(5), slapadd(8), slapcat(8), slapindex(8), slapmodify(8), slappasswd(8)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|