|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FILES | ENVIRONMENT | EXAMPLES | CONFIGURATION FILE | GIT | COLOPHON |
|
GIT-CONFIG(1) Git Manual GIT-CONFIG(1)
git-config - Get and set repository or global options
git config [<file-option>] [type] [--show-origin] [-z|--null] name [value [value_regex]]
git config [<file-option>] [type] --add name value
git config [<file-option>] [type] --replace-all name value [value_regex]
git config [<file-option>] [type] [--show-origin] [-z|--null] --get name [value_regex]
git config [<file-option>] [type] [--show-origin] [-z|--null] --get-all name [value_regex]
git config [<file-option>] [type] [--show-origin] [-z|--null] [--name-only] --get-regexp name_regex [value_regex]
git config [<file-option>] [type] [-z|--null] --get-urlmatch name URL
git config [<file-option>] --unset name [value_regex]
git config [<file-option>] --unset-all name [value_regex]
git config [<file-option>] --rename-section old_name new_name
git config [<file-option>] --remove-section name
git config [<file-option>] [--show-origin] [-z|--null] [--name-only] -l | --list
git config [<file-option>] --get-color name [default]
git config [<file-option>] --get-colorbool name [stdout-is-tty]
git config [<file-option>] -e | --edit
You can query/set/replace/unset options with this command. The name
is actually the section and the key separated by a dot, and the value
will be escaped.
Multiple lines can be added to an option by using the --add option.
If you want to update or unset an option which can occur on multiple
lines, a POSIX regexp value_regex needs to be given. Only the
existing values that match the regexp are updated or unset. If you
want to handle the lines that do not match the regex, just prepend a
single exclamation mark in front (see also the section called
“EXAMPLES”).
The type specifier can be either --int or --bool, to make git config
ensure that the variable(s) are of the given type and convert the
value to the canonical form (simple decimal number for int, a "true"
or "false" string for bool), or --path, which does some path
expansion (see --path below). If no type specifier is passed, no
checks or transformations are performed on the value.
When reading, the values are read from the system, global and
repository local configuration files by default, and options
--system, --global, --local and --file <filename> can be used to tell
the command to read from only that location (see the section called
“FILES”).
When writing, the new value is written to the repository local
configuration file by default, and options --system, --global, --file
<filename> can be used to tell the command to write to that location
(you can say --local but that is the default).
This command will fail with non-zero status upon error. Some exit
codes are:
· The section or key is invalid (ret=1),
· no section or name was provided (ret=2),
· the config file is invalid (ret=3),
· the config file cannot be written (ret=4),
· you try to unset an option which does not exist (ret=5),
· you try to unset/set an option for which multiple lines match
(ret=5), or
· you try to use an invalid regexp (ret=6).
On success, the command returns the exit code 0.
--replace-all
Default behavior is to replace at most one line. This replaces
all lines matching the key (and optionally the value_regex).
--add
Adds a new line to the option without altering any existing
values. This is the same as providing ^$ as the value_regex in
--replace-all.
--get
Get the value for a given key (optionally filtered by a regex
matching the value). Returns error code 1 if the key was not
found and the last value if multiple key values were found.
--get-all
Like get, but returns all values for a multi-valued key.
--get-regexp
Like --get-all, but interprets the name as a regular expression
and writes out the key names. Regular expression matching is
currently case-sensitive and done against a canonicalized version
of the key in which section and variable names are lowercased,
but subsection names are not.
--get-urlmatch name URL
When given a two-part name section.key, the value for
section.<url>.key whose <url> part matches the best to the given
URL is returned (if no such key exists, the value for section.key
is used as a fallback). When given just the section as name, do
so for all the keys in the section and list them. Returns error
code 1 if no value is found.
--global
For writing options: write to global ~/.gitconfig file rather
than the repository .git/config, write to
$XDG_CONFIG_HOME/git/config file if this file exists and the
~/.gitconfig file doesn’t.
For reading options: read only from global ~/.gitconfig and from
$XDG_CONFIG_HOME/git/config rather than from all available files.
See also the section called “FILES”.
--system
For writing options: write to system-wide $(prefix)/etc/gitconfig
rather than the repository .git/config.
For reading options: read only from system-wide
$(prefix)/etc/gitconfig rather than from all available files.
See also the section called “FILES”.
--local
For writing options: write to the repository .git/config file.
This is the default behavior.
For reading options: read only from the repository .git/config
rather than from all available files.
See also the section called “FILES”.
-f config-file, --file config-file
Use the given config file instead of the one specified by
GIT_CONFIG.
--blob blob
Similar to --file but use the given blob instead of a file. E.g.
you can use master:.gitmodules to read values from the file
.gitmodules in the master branch. See "SPECIFYING REVISIONS"
section in gitrevisions(7) for a more complete list of ways to
spell blob names.
--remove-section
Remove the given section from the configuration file.
--rename-section
Rename the given section to a new name.
--unset
Remove the line matching the key from config file.
--unset-all
Remove all lines matching the key from config file.
-l, --list
List all variables set in config file, along with their values.
--bool
git config will ensure that the output is "true" or "false"
--int
git config will ensure that the output is a simple decimal
number. An optional value suffix of k, m, or g in the config file
will cause the value to be multiplied by 1024, 1048576, or
1073741824 prior to output.
--bool-or-int
git config will ensure that the output matches the format of
either --bool or --int, as described above.
--path
git config will expand a leading ~ to the value of $HOME, and
~user to the home directory for the specified user. This option
has no effect when setting the value (but you can use git config
section.variable ~/ from the command line to let your shell do
the expansion).
--expiry-date
git config will ensure that the output is converted from a fixed
or relative date-string to a timestamp. This option has no effect
when setting the value.
-z, --null
For all options that output values and/or keys, always end values
with the null character (instead of a newline). Use newline
instead as a delimiter between key and value. This allows for
secure parsing of the output without getting confused e.g. by
values that contain line breaks.
--name-only
Output only the names of config variables for --list or
--get-regexp.
--show-origin
Augment the output of all queried config options with the origin
type (file, standard input, blob, command line) and the actual
origin (config file path, ref, or blob id if applicable).
--get-colorbool name [stdout-is-tty]
Find the color setting for name (e.g. color.diff) and output
"true" or "false". stdout-is-tty should be either "true" or
"false", and is taken into account when configuration says
"auto". If stdout-is-tty is missing, then checks the standard
output of the command itself, and exits with status 0 if color is
to be used, or exits with status 1 otherwise. When the color
setting for name is undefined, the command uses color.ui as
fallback.
--get-color name [default]
Find the color configured for name (e.g. color.diff.new) and
output it as the ANSI color escape sequence to the standard
output. The optional default parameter is used instead, if there
is no color configured for name.
-e, --edit
Opens an editor to modify the specified config file; either
--system, --global, or repository (default).
--[no-]includes
Respect include.* directives in config files when looking up
values. Defaults to off when a specific file is given (e.g.,
using --file, --global, etc) and on when searching all config
files.
If not set explicitly with --file, there are four files where git
config will search for configuration options:
$(prefix)/etc/gitconfig
System-wide configuration file.
$XDG_CONFIG_HOME/git/config
Second user-specific configuration file. If $XDG_CONFIG_HOME is
not set or empty, $HOME/.config/git/config will be used. Any
single-valued variable set in this file will be overwritten by
whatever is in ~/.gitconfig. It is a good idea not to create this
file if you sometimes use older versions of Git, as support for
this file was added fairly recently.
~/.gitconfig
User-specific configuration file. Also called "global"
configuration file.
$GIT_DIR/config
Repository specific configuration file.
If no further options are given, all reading options will read all of
these files that are available. If the global or the system-wide
configuration file are not available they will be ignored. If the
repository configuration file is not available or readable, git
config will exit with a non-zero error code. However, in neither case
will an error message be issued.
The files are read in the order given above, with last value found
taking precedence over values read earlier. When multiple values are
taken then all values of a key from all files will be used.
You may override individual configuration parameters when running any
git command by using the -c option. See git(1) for details.
All writing options will per default write to the repository specific
configuration file. Note that this also affects options like
--replace-all and --unset. git config will only ever change one file
at a time.
You can override these rules either by command-line options or by
environment variables. The --global and the --system options will
limit the file used to the global or system-wide file respectively.
The GIT_CONFIG environment variable has a similar effect, but you can
specify any filename you want.
GIT_CONFIG
Take the configuration from the given file instead of
.git/config. Using the "--global" option forces this to
~/.gitconfig. Using the "--system" option forces this to
$(prefix)/etc/gitconfig.
GIT_CONFIG_NOSYSTEM
Whether to skip reading settings from the system-wide
$(prefix)/etc/gitconfig file. See git(1) for details.
See also the section called “FILES”.
Given a .git/config like this:
#
# This is the config file, and
# a '#' or ';' character indicates
# a comment
#
; core variables
[core]
; Don't trust file modes
filemode = false
; Our diff algorithm
[diff]
external = /usr/local/bin/diff-wrapper
renames = true
; Proxy settings
[core]
gitproxy=proxy-command for kernel.org
gitproxy=default-proxy ; for all the rest
; HTTP
[http]
sslVerify
[http "https://weak.example.com"]
sslVerify = false
cookieFile = /tmp/cookie.txt
you can set the filemode to true with
% git config core.filemode true
The hypothetical proxy command entries actually have a postfix to
discern what URL they apply to. Here is how to change the entry for
kernel.org to "ssh".
% git config core.gitproxy '"ssh" for kernel.org' 'for kernel.org$'
This makes sure that only the key/value pair for kernel.org is
replaced.
To delete the entry for renames, do
% git config --unset diff.renames
If you want to delete an entry for a multivar (like core.gitproxy
above), you have to provide a regex matching the value of exactly one
line.
To query the value for a given key, do
% git config --get core.filemode
or
% git config core.filemode
or, to query a multivar:
% git config --get core.gitproxy "for kernel.org$"
If you want to know all the values for a multivar, do:
% git config --get-all core.gitproxy
If you like to live dangerously, you can replace all core.gitproxy by
a new one with
% git config --replace-all core.gitproxy ssh
However, if you really only want to replace the line for the default
proxy, i.e. the one without a "for ..." postfix, do something like
this:
% git config core.gitproxy ssh '! for '
To actually match only values with an exclamation mark, you have to
% git config section.key value '[!]'
To add a new proxy, without altering any of the existing ones, use
% git config --add core.gitproxy '"proxy-command" for example.com'
An example to use customized color from the configuration in your
script:
#!/bin/sh
WS=$(git config --get-color color.diff.whitespace "blue reverse")
RESET=$(git config --get-color "" "reset")
echo "${WS}your whitespace color or blue reverse${RESET}"
For URLs in https://weak.example.com , http.sslVerify is set to false,
while it is set to true for all others:
% git config --bool --get-urlmatch http.sslverify https://good.example.com
true
% git config --bool --get-urlmatch http.sslverify https://weak.example.com
false
% git config --get-urlmatch http https://weak.example.com
http.cookieFile /tmp/cookie.txt
http.sslverify false
The Git configuration file contains a number of variables that affect
the Git commands' behavior. The .git/config file in each repository
is used to store the configuration for that repository, and
$HOME/.gitconfig is used to store a per-user configuration as
fallback values for the .git/config file. The file /etc/gitconfig can
be used to store a system-wide default configuration.
The configuration variables are used by both the Git plumbing and the
porcelains. The variables are divided into sections, wherein the
fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the
last dot. The variable names are case-insensitive, allow only
alphanumeric characters and -, and must start with an alphabetic
character. Some variables may appear multiple times; we say then that
the variable is multivalued.
Syntax
The syntax is fairly flexible and permissive; whitespaces are mostly
ignored. The # and ; characters begin comments to the end of line,
blank lines are ignored.
The file consists of sections and variables. A section begins with
the name of the section in square brackets and continues until the
next section begins. Section names are case-insensitive. Only
alphanumeric characters, - and . are allowed in section names. Each
variable must belong to some section, which means that there must be
a section header before the first setting of a variable.
Sections can be further divided into subsections. To begin a
subsection put its name in double quotes, separated by space from the
section name, in the section header, like in the example below:
[section "subsection"]
Subsection names are case sensitive and can contain any characters
except newline and the null byte. Doublequote " and backslash can be
included by escaping them as \" and \\, respectively. Backslashes
preceding other characters are dropped when reading; for example, \t
is read as t and \0 is read as 0 Section headers cannot span multiple
lines. Variables may belong directly to a section or to a given
subsection. You can have [section] if you have [section
"subsection"], but you don’t need to.
There is also a deprecated [section.subsection] syntax. With this
syntax, the subsection name is converted to lower-case and is also
compared case sensitively. These subsection names follow the same
restrictions as section names.
All the other lines (and the remainder of the line after the section
header) are recognized as setting variables, in the form name = value
(or just name, which is a short-hand to say that the variable is the
boolean "true"). The variable names are case-insensitive, allow only
alphanumeric characters and -, and must start with an alphabetic
character.
A line that defines a value can be continued to the next line by
ending it with a \; the backquote and the end-of-line are stripped.
Leading whitespaces after name =, the remainder of the line after the
first comment character # or ;, and trailing whitespaces of the line
are discarded unless they are enclosed in double quotes. Internal
whitespaces within the value are retained verbatim.
Inside double quotes, double quote " and backslash \ characters must
be escaped: use \" for " and \\ for \.
The following escape sequences (beside \" and \\) are recognized: \n
for newline character (NL), \t for horizontal tabulation (HT, TAB)
and \b for backspace (BS). Other char escape sequences (including
octal escape sequences) are invalid.
Includes
The include and includeIf sections allow you to include config
directives from another source. These sections behave identically to
each other with the exception that includeIf sections may be ignored
if their condition does not evaluate to true; see "Conditional
includes" below.
You can include a config file from another by setting the special
include.path (or includeIf.*.path) variable to the name of the file
to be included. The variable takes a pathname as its value, and is
subject to tilde expansion. These variables can be given multiple
times.
The contents of the included file are inserted immediately, as if
they had been found at the location of the include directive. If the
value of the variable is a relative path, the path is considered to
be relative to the configuration file in which the include directive
was found. See below for examples.
Conditional includes
You can include a config file from another conditionally by setting a
includeIf.<condition>.path variable to the name of the file to be
included.
The condition starts with a keyword followed by a colon and some data
whose format and meaning depends on the keyword. Supported keywords
are:
gitdir
The data that follows the keyword gitdir: is used as a glob
pattern. If the location of the .git directory matches the
pattern, the include condition is met.
The .git location may be auto-discovered, or come from $GIT_DIR
environment variable. If the repository is auto discovered via a
.git file (e.g. from submodules, or a linked worktree), the .git
location would be the final location where the .git directory is,
not where the .git file is.
The pattern can contain standard globbing wildcards and two
additional ones, **/ and /**, that can match multiple path
components. Please refer to gitignore(5) for details. For
convenience:
· If the pattern starts with ~/, ~ will be substituted with the
content of the environment variable HOME.
· If the pattern starts with ./, it is replaced with the
directory containing the current config file.
· If the pattern does not start with either ~/, ./ or /, **/
will be automatically prepended. For example, the pattern
foo/bar becomes **/foo/bar and would match
/any/path/to/foo/bar.
· If the pattern ends with /, ** will be automatically added.
For example, the pattern foo/ becomes foo/**. In other words,
it matches "foo" and everything inside, recursively.
gitdir/i
This is the same as gitdir except that matching is done
case-insensitively (e.g. on case-insensitive file sytems)
A few more notes on matching via gitdir and gitdir/i:
· Symlinks in $GIT_DIR are not resolved before matching.
· Both the symlink & realpath versions of paths will be matched
outside of $GIT_DIR. E.g. if ~/git is a symlink to
/mnt/storage/git, both gitdir:~/git and gitdir:/mnt/storage/git
will match.
This was not the case in the initial release of this feature in
v2.13.0, which only matched the realpath version. Configuration
that wants to be compatible with the initial release of this
feature needs to either specify only the realpath version, or
both versions.
· Note that "../" is not special and will match literally, which is
unlikely what you want.
Example
# Core variables
[core]
; Don't trust file modes
filemode = false
# Our diff algorithm
[diff]
external = /usr/local/bin/diff-wrapper
renames = true
[branch "devel"]
remote = origin
merge = refs/heads/devel
# Proxy settings
[core]
gitProxy="ssh" for "kernel.org"
gitProxy=default-proxy ; for the rest
[include]
path = /path/to/foo.inc ; include by absolute path
path = foo.inc ; find "foo.inc" relative to the current file
path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory
; include if $GIT_DIR is /path/to/foo/.git
[includeIf "gitdir:/path/to/foo/.git"]
path = /path/to/foo.inc
; include for all repositories inside /path/to/group
[includeIf "gitdir:/path/to/group/"]
path = /path/to/foo.inc
; include for all repositories inside $HOME/to/group
[includeIf "gitdir:~/to/group/"]
path = /path/to/foo.inc
; relative paths are always relative to the including
; file (if the condition is true); their location is not
; affected by the condition
[includeIf "gitdir:/path/to/group/"]
path = foo.inc
Values
Values of many variables are treated as a simple string, but there
are variables that take values of specific types and there are rules
as to how to spell them.
boolean
When a variable is said to take a boolean value, many synonyms
are accepted for true and false; these are all case-insensitive.
true
Boolean true literals are yes, on, true, and 1. Also, a
variable defined without = <value> is taken as true.
false
Boolean false literals are no, off, false, 0 and the empty
string.
When converting value to the canonical form using --bool type
specifier, git config will ensure that the output is "true"
or "false" (spelled in lowercase).
integer
The value for many variables that specify various sizes can be
suffixed with k, M,... to mean "scale the number by 1024", "by
1024x1024", etc.
color
The value for a variable that takes a color is a list of colors
(at most two, one for foreground and one for background) and
attributes (as many as you want), separated by spaces.
The basic colors accepted are normal, black, red, green, yellow,
blue, magenta, cyan and white. The first color given is the
foreground; the second is the background.
Colors may also be given as numbers between 0 and 255; these use
ANSI 256-color mode (but note that not all terminals may support
this). If your terminal supports it, you may also specify 24-bit
RGB values as hex, like #ff0ab3.
The accepted attributes are bold, dim, ul, blink, reverse,
italic, and strike (for crossed-out or "strikethrough" letters).
The position of any attributes with respect to the colors
(before, after, or in between), doesn’t matter. Specific
attributes may be turned off by prefixing them with no or no-
(e.g., noreverse, no-ul, etc).
An empty color string produces no color effect at all. This can
be used to avoid coloring specific elements without disabling
color entirely.
For git’s pre-defined color slots, the attributes are meant to be
reset at the beginning of each item in the colored output. So
setting color.decorate.branch to black will paint that branch
name in a plain black, even if the previous thing on the same
output line (e.g. opening parenthesis before the list of branch
names in log --decorate output) is set to be painted with bold or
some other attribute. However, custom log formats may do more
complicated and layered coloring, and the negated forms may be
useful there.
pathname
A variable that takes a pathname value can be given a string that
begins with "~/" or "~user/", and the usual tilde expansion
happens to such a string: ~/ is expanded to the value of $HOME,
and ~user/ to the specified user’s home directory.
Variables
Note that this list is non-comprehensive and not necessarily
complete. For command-specific variables, you will find a more
detailed description in the appropriate manual page.
Other git-related tools may and do use their own variables. When
inventing new variables for use in your own tool, make sure their
names do not conflict with those that are used by Git itself and
other popular tools, and describe them in your documentation.
advice.*
These variables control various optional help messages designed
to aid new users. All advice.* variables default to true, and
you can tell Git that you do not need help by setting these to
false:
pushUpdateRejected
Set this variable to false if you want to disable
pushNonFFCurrent, pushNonFFMatching, pushAlreadyExists,
pushFetchFirst, and pushNeedsForce simultaneously.
pushNonFFCurrent
Advice shown when git-push(1) fails due to a non-fast-forward
update to the current branch.
pushNonFFMatching
Advice shown when you ran git-push(1) and pushed matching
refs explicitly (i.e. you used :, or specified a refspec that
isn’t your current branch) and it resulted in a
non-fast-forward error.
pushAlreadyExists
Shown when git-push(1) rejects an update that does not
qualify for fast-forwarding (e.g., a tag.)
pushFetchFirst
Shown when git-push(1) rejects an update that tries to
overwrite a remote ref that points at an object we do not
have.
pushNeedsForce
Shown when git-push(1) rejects an update that tries to
overwrite a remote ref that points at an object that is not a
commit-ish, or make the remote ref point at an object that is
not a commit-ish.
statusHints
Show directions on how to proceed from the current state in
the output of git-status(1), in the template shown when
writing commit messages in git-commit(1), and in the help
message shown by git-checkout(1) when switching branch.
statusUoption
Advise to consider using the -u option to git-status(1) when
the command takes more than 2 seconds to enumerate untracked
files.
commitBeforeMerge
Advice shown when git-merge(1) refuses to merge to avoid
overwriting local changes.
resolveConflict
Advice shown by various commands when conflicts prevent the
operation from being performed.
implicitIdentity
Advice on how to set your identity configuration when your
information is guessed from the system username and domain
name.
detachedHead
Advice shown when you used git-checkout(1) to move to the
detach HEAD state, to instruct how to create a local branch
after the fact.
amWorkDir
Advice that shows the location of the patch file when
git-am(1) fails to apply it.
rmHints
In case of failure in the output of git-rm(1), show
directions on how to proceed from the current state.
addEmbeddedRepo
Advice on what to do when you’ve accidentally added one git
repo inside of another.
ignoredHook
Advice shown if an hook is ignored because the hook is not
set as executable.
waitingForEditor
Print a message to the terminal whenever Git is waiting for
editor input from the user.
core.fileMode
Tells Git if the executable bit of files in the working tree is
to be honored.
Some filesystems lose the executable bit when a file that is
marked as executable is checked out, or checks out a
non-executable file with executable bit on. git-clone(1) or
git-init(1) probe the filesystem to see if it handles the
executable bit correctly and this variable is automatically set
as necessary.
A repository, however, may be on a filesystem that handles the
filemode correctly, and this variable is set to true when
created, but later may be made accessible from another
environment that loses the filemode (e.g. exporting ext4 via CIFS
mount, visiting a Cygwin created repository with Git for Windows
or Eclipse). In such a case it may be necessary to set this
variable to false. See git-update-index(1).
The default is true (when core.filemode is not specified in the
config file).
core.hideDotFiles
(Windows-only) If true, mark newly-created directories and files
whose name starts with a dot as hidden. If dotGitOnly, only the
.git/ directory is hidden, but no other files starting with a
dot. The default mode is dotGitOnly.
core.ignoreCase
If true, this option enables various workarounds to enable Git to
work better on filesystems that are not case sensitive, like FAT.
For example, if a directory listing finds "makefile" when Git
expects "Makefile", Git will assume it is really the same file,
and continue to remember it as "Makefile".
The default is false, except git-clone(1) or git-init(1) will
probe and set core.ignoreCase true if appropriate when the
repository is created.
core.precomposeUnicode
This option is only used by Mac OS implementation of Git. When
core.precomposeUnicode=true, Git reverts the unicode
decomposition of filenames done by Mac OS. This is useful when
sharing a repository between Mac OS and Linux or Windows. (Git
for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
When false, file names are handled fully transparent by Git,
which is backward compatible with older versions of Git.
core.protectHFS
If set to true, do not allow checkout of paths that would be
considered equivalent to .git on an HFS+ filesystem. Defaults to
true on Mac OS, and false elsewhere.
core.protectNTFS
If set to true, do not allow checkout of paths that would cause
problems with the NTFS filesystem, e.g. conflict with 8.3 "short"
names. Defaults to true on Windows, and false elsewhere.
core.fsmonitor
If set, the value of this variable is used as a command which
will identify all files that may have changed since the requested
date/time. This information is used to speed up git by avoiding
unnecessary processing of files that have not changed. See the
"fsmonitor-watchman" section of githooks(5).
core.trustctime
If false, the ctime differences between the index and the working
tree are ignored; useful when the inode change time is regularly
modified by something outside Git (file system crawlers and some
backup systems). See git-update-index(1). True by default.
core.splitIndex
If true, the split-index feature of the index will be used. See
git-update-index(1). False by default.
core.untrackedCache
Determines what to do about the untracked cache feature of the
index. It will be kept, if this variable is unset or set to keep.
It will automatically be added if set to true. And it will
automatically be removed, if set to false. Before setting it to
true, you should check that mtime is working properly on your
system. See git-update-index(1). keep by default.
core.checkStat
Determines which stat fields to match between the index and work
tree. The user can set this to default or minimal. Default (or
explicitly default), is to check all fields, including the
sub-second part of mtime and ctime.
core.quotePath
Commands that output paths (e.g. ls-files, diff), will quote
"unusual" characters in the pathname by enclosing the pathname in
double-quotes and escaping those characters with backslashes in
the same way C escapes control characters (e.g. \t for TAB, \n
for LF, \\ for backslash) or bytes with values larger than 0x80
(e.g. octal \302\265 for "micro" in UTF-8). If this variable is
set to false, bytes higher than 0x80 are not considered "unusual"
any more. Double-quotes, backslash and control characters are
always escaped regardless of the setting of this variable. A
simple space character is not considered "unusual". Many commands
can output pathnames completely verbatim using the -z option. The
default value is true.
core.eol
Sets the line ending type to use in the working directory for
files that have the text property set when core.autocrlf is
false. Alternatives are lf, crlf and native, which uses the
platform’s native line ending. The default value is native. See
gitattributes(5) for more information on end-of-line conversion.
core.safecrlf
If true, makes Git check if converting CRLF is reversible when
end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly.
For example, committing a file followed by checking out the same
file should yield the original file in the work tree. If this is
not the case for the current setting of core.autocrlf, Git will
reject the file. The variable can be set to "warn", in which case
Git will only warn about an irreversible conversion but continue
the operation.
CRLF conversion bears a slight chance of corrupting data. When it
is enabled, Git will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by Git. For text files
this is the right thing to do: it corrects line endings such that
we have only LF line endings in the repository. But for binary
files that are accidentally classified as text the conversion can
corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
Git that this file is binary and Git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed in
an irreversible way. For text files this is the right thing to do
because CRLFs are line endings, while for binary files converting
CRLFs corrupts data.
Note, this safety check does not mean that a checkout will
generate a file identical to the original file for a different
setting of core.eol and core.autocrlf, but only for the current
one. For example, a text file with LF would be accepted with
core.eol=lf and could later be checked out with core.eol=crlf, in
which case the resulting file would contain CRLF, although the
original file contained LF. However, in both work trees the line
endings would be consistent, that is either all LF or all CRLF,
but never mixed. A file with mixed line endings would be reported
by the core.safecrlf mechanism.
core.autocrlf
Setting this variable to "true" is the same as setting the text
attribute to "auto" on all files and core.eol to "crlf". Set to
true if you want to have CRLF line endings in your working
directory and the repository has LF line endings. This variable
can be set to input, in which case no output conversion is
performed.
core.symlinks
If false, symbolic links are checked out as small plain files
that contain the link text. git-update-index(1) and git-add(1)
will not change the recorded type to regular file. Useful on
filesystems like FAT that do not support symbolic links.
The default is true, except git-clone(1) or git-init(1) will
probe and set core.symlinks false if appropriate when the
repository is created.
core.gitProxy
A "proxy command" to execute (as command host port) instead of
establishing direct connection to the remote server when using
the Git protocol for fetching. If the variable value is in the
"COMMAND for DOMAIN" format, the command is applied only on
hostnames ending with the specified domain string. This variable
may be set multiple times and is matched in the given order; the
first match wins.
Can be overridden by the GIT_PROXY_COMMAND environment variable
(which always applies universally, without the special "for"
handling).
The special string none can be used as the proxy command to
specify that no proxy be used for a given domain pattern. This is
useful for excluding servers inside a firewall from proxy use,
while defaulting to a common proxy for external domains.
core.sshCommand
If this variable is set, git fetch and git push will use the
specified command instead of ssh when they need to connect to a
remote system. The command is in the same form as the
GIT_SSH_COMMAND environment variable and is overridden when the
environment variable is set.
core.ignoreStat
If true, Git will avoid using lstat() calls to detect if files
have changed by setting the "assume-unchanged" bit for those
tracked files which it has updated identically in both the index
and working tree.
When files are modified outside of Git, the user will need to
stage the modified files explicitly (e.g. see Examples section in
git-update-index(1)). Git will not normally detect changes to
those files.
This is useful on systems where lstat() calls are very slow, such
as CIFS/Microsoft Windows.
False by default.
core.preferSymlinkRefs
Instead of the default "symref" format for HEAD and other
symbolic reference files, use symbolic links. This is sometimes
needed to work with old scripts that expect HEAD to be a symbolic
link.
core.bare
If true this repository is assumed to be bare and has no working
directory associated with it. If this is the case a number of
commands that require a working directory will be disabled, such
as git-add(1) or git-merge(1).
This setting is automatically guessed by git-clone(1) or
git-init(1) when the repository was created. By default a
repository that ends in "/.git" is assumed to be not bare (bare =
false), while all other repositories are assumed to be bare (bare
= true).
core.worktree
Set the path to the root of the working tree. If GIT_COMMON_DIR
environment variable is set, core.worktree is ignored and not
used for determining the root of working tree. This can be
overridden by the GIT_WORK_TREE environment variable and the
--work-tree command-line option. The value can be an absolute
path or relative to the path to the .git directory, which is
either specified by --git-dir or GIT_DIR, or automatically
discovered. If --git-dir or GIT_DIR is specified but none of
--work-tree, GIT_WORK_TREE and core.worktree is specified, the
current working directory is regarded as the top level of your
working tree.
Note that this variable is honored even when set in a
configuration file in a ".git" subdirectory of a directory and
its value differs from the latter directory (e.g.
"/path/to/.git/config" has core.worktree set to
"/different/path"), which is most likely a misconfiguration.
Running Git commands in the "/path/to" directory will still use
"/different/path" as the root of the work tree and can cause
confusion unless you know what you are doing (e.g. you are
creating a read-only snapshot of the same index to a location
different from the repository’s usual working tree).
core.logAllRefUpdates
Enable the reflog. Updates to a ref <ref> is logged to the file
"$GIT_DIR/logs/<ref>", by appending the new and old SHA-1, the
date/time and the reason of the update, but only when the file
exists. If this configuration variable is set to true, missing
"$GIT_DIR/logs/<ref>" file is automatically created for branch
heads (i.e. under refs/heads/), remote refs (i.e. under
refs/remotes/), note refs (i.e. under refs/notes/), and the
symbolic ref HEAD. If it is set to always, then a missing reflog
is automatically created for any ref under refs/.
This information can be used to determine what commit was the tip
of a branch "2 days ago".
This value is true by default in a repository that has a working
directory associated with it, and false by default in a bare
repository.
core.repositoryFormatVersion
Internal variable identifying the repository format and layout
version.
core.sharedRepository
When group (or true), the repository is made shareable between
several users in a group (making sure all the files and objects
are group-writable). When all (or world or everybody), the
repository will be readable by all users, additionally to being
group-shareable. When umask (or false), Git will use permissions
reported by umask(2). When 0xxx, where 0xxx is an octal number,
files in the repository will have this mode value. 0xxx will
override user’s umask value (whereas the other options will only
override requested parts of the user’s umask value). Examples:
0660 will make the repo read/write-able for the owner and group,
but inaccessible to others (equivalent to group unless umask is
e.g. 0022). 0640 is a repository that is group-readable but not
group-writable. See git-init(1). False by default.
core.warnAmbiguousRefs
If true, Git will warn you if the ref name you passed it is
ambiguous and might match multiple refs in the repository. True
by default.
core.compression
An integer -1..9, indicating a default compression level. -1 is
the zlib default. 0 means no compression, and 1..9 are various
speed/size tradeoffs, 9 being slowest. If set, this provides a
default to other compression variables, such as
core.looseCompression and pack.compression.
core.looseCompression
An integer -1..9, indicating the compression level for objects
that are not in a pack file. -1 is the zlib default. 0 means no
compression, and 1..9 are various speed/size tradeoffs, 9 being
slowest. If not set, defaults to core.compression. If that is not
set, defaults to 1 (best speed).
core.packedGitWindowSize
Number of bytes of a pack file to map into memory in a single
mapping operation. Larger window sizes may allow your system to
process a smaller number of large pack files more quickly.
Smaller window sizes will negatively affect performance due to
increased calls to the operating system’s memory manager, but may
improve performance when accessing a large number of large pack
files.
Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This
should be reasonable for all users/operating systems. You
probably do not need to adjust this value.
Common unit suffixes of k, m, or g are supported.
core.packedGitLimit
Maximum number of bytes to map simultaneously into memory from
pack files. If Git needs to access more than this many bytes at
once to complete an operation it will unmap existing regions to
reclaim virtual address space within the process.
Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
unlimited) on 64 bit platforms. This should be reasonable for all
users/operating systems, except on the largest projects. You
probably do not need to adjust this value.
Common unit suffixes of k, m, or g are supported.
core.deltaBaseCacheLimit
Maximum number of bytes to reserve for caching base objects that
may be referenced by multiple deltified objects. By storing the
entire decompressed base objects in a cache Git is able to avoid
unpacking and decompressing frequently used base objects multiple
times.
Default is 96 MiB on all platforms. This should be reasonable for
all users/operating systems, except on the largest projects. You
probably do not need to adjust this value.
Common unit suffixes of k, m, or g are supported.
core.bigFileThreshold
Files larger than this size are stored deflated, without
attempting delta compression. Storing large files without delta
compression avoids excessive memory usage, at the slight expense
of increased disk usage. Additionally files larger than this size
are always treated as binary.
Default is 512 MiB on all platforms. This should be reasonable
for most projects as source code and other text files can still
be delta compressed, but larger binary media files won’t be.
Common unit suffixes of k, m, or g are supported.
core.excludesFile
Specifies the pathname to the file that contains patterns to
describe paths that are not meant to be tracked, in addition to
.gitignore (per-directory) and .git/info/exclude. Defaults to
$XDG_CONFIG_HOME/git/ignore. If $XDG_CONFIG_HOME is either not
set or empty, $HOME/.config/git/ignore is used instead. See
gitignore(5).
core.askPass
Some commands (e.g. svn and http interfaces) that interactively
ask for a password can be told to use an external program given
via the value of this variable. Can be overridden by the
GIT_ASKPASS environment variable. If not set, fall back to the
value of the SSH_ASKPASS environment variable or, failing that, a
simple password prompt. The external program shall be given a
suitable prompt as command-line argument and write the password
on its STDOUT.
core.attributesFile
In addition to .gitattributes (per-directory) and
.git/info/attributes, Git looks into this file for attributes
(see gitattributes(5)). Path expansions are made the same way as
for core.excludesFile. Its default value is
$XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either
not set or empty, $HOME/.config/git/attributes is used instead.
core.hooksPath
By default Git will look for your hooks in the $GIT_DIR/hooks
directory. Set this to different path, e.g. /etc/git/hooks, and
Git will try to find your hooks in that directory, e.g.
/etc/git/hooks/pre-receive instead of in
$GIT_DIR/hooks/pre-receive.
The path can be either absolute or relative. A relative path is
taken as relative to the directory where the hooks are run (see
the "DESCRIPTION" section of githooks(5)).
This configuration variable is useful in cases where you’d like
to centrally configure your Git hooks instead of configuring them
on a per-repository basis, or as a more flexible and centralized
alternative to having an init.templateDir where you’ve changed
default hooks.
core.editor
Commands such as commit and tag that let you edit messages by
launching an editor use the value of this variable when it is
set, and the environment variable GIT_EDITOR is not set. See
git-var(1).
core.commentChar
Commands such as commit and tag that let you edit messages
consider a line that begins with this character commented, and
removes them after the editor returns (default #).
If set to "auto", git-commit would select a character that is not
the beginning character of any line in existing commit messages.
core.filesRefLockTimeout
The length of time, in milliseconds, to retry when trying to lock
an individual reference. Value 0 means not to retry at all; -1
means to try indefinitely. Default is 100 (i.e., retry for
100ms).
core.packedRefsTimeout
The length of time, in milliseconds, to retry when trying to lock
the packed-refs file. Value 0 means not to retry at all; -1 means
to try indefinitely. Default is 1000 (i.e., retry for 1 second).
sequence.editor
Text editor used by git rebase -i for editing the rebase
instruction file. The value is meant to be interpreted by the
shell when it is used. It can be overridden by the
GIT_SEQUENCE_EDITOR environment variable. When not configured the
default commit message editor is used instead.
core.pager
Text viewer for use by Git commands (e.g., less). The value is
meant to be interpreted by the shell. The order of preference is
the $GIT_PAGER environment variable, then core.pager
configuration, then $PAGER, and then the default chosen at
compile time (usually less).
When the LESS environment variable is unset, Git sets it to FRX
(if LESS environment variable is set, Git does not change it at
all). If you want to selectively override Git’s default setting
for LESS, you can set core.pager to e.g. less -S. This will be
passed to the shell by Git, which will translate the final
command to LESS=FRX less -S. The environment does not set the S
option but the command line does, instructing less to truncate
long lines. Similarly, setting core.pager to less -+F will
deactivate the F option specified by the environment from the
command-line, deactivating the "quit if one screen" behavior of
less. One can specifically activate some flags for particular
commands: for example, setting pager.blame to less -S enables
line truncation only for git blame.
Likewise, when the LV environment variable is unset, Git sets it
to -c. You can override this setting by exporting LV with another
value or setting core.pager to lv +c.
core.whitespace
A comma separated list of common whitespace problems to notice.
git diff will use color.diff.whitespace to highlight them, and
git apply --whitespace=error will consider them as errors. You
can prefix - to disable any of them (e.g. -trailing-space):
· blank-at-eol treats trailing whitespaces at the end of the
line as an error (enabled by default).
· space-before-tab treats a space character that appears
immediately before a tab character in the initial indent part
of the line as an error (enabled by default).
· indent-with-non-tab treats a line that is indented with space
characters instead of the equivalent tabs as an error (not
enabled by default).
· tab-in-indent treats a tab character in the initial indent
part of the line as an error (not enabled by default).
· blank-at-eof treats blank lines added at the end of file as
an error (enabled by default).
· trailing-space is a short-hand to cover both blank-at-eol and
blank-at-eof.
· cr-at-eol treats a carriage-return at the end of line as part
of the line terminator, i.e. with it, trailing-space does not
trigger if the character before such a carriage-return is not
a whitespace (not enabled by default).
· tabwidth=<n> tells how many character positions a tab
occupies; this is relevant for indent-with-non-tab and when
Git fixes tab-in-indent errors. The default tab width is 8.
Allowed values are 1 to 63.
core.fsyncObjectFiles
This boolean will enable fsync() when writing object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems
that do not use journalling (traditional UNIX filesystems) or
that only journal metadata and not file contents (OS X’s HFS+, or
Linux ext3 with "data=writeback").
core.preloadIndex
Enable parallel index preload for operations like git diff
This can speed up operations like git diff and git status
especially on filesystems like NFS that have weak caching
semantics and thus relatively high IO latencies. When enabled,
Git will do the index comparison to the filesystem data in
parallel, allowing overlapping IO’s. Defaults to true.
core.createObject
You can set this to link, in which case a hardlink followed by a
delete of the source are used to make sure that object creation
will not overwrite existing objects.
On some file system/operating system combinations, this is
unreliable. Set this config setting to rename there; However,
This will remove the check that makes sure that existing object
files will not get overwritten.
core.notesRef
When showing commit messages, also show notes which are stored in
the given ref. The ref must be fully qualified. If the given ref
does not exist, it is not an error but means that no notes should
be printed.
This setting defaults to "refs/notes/commits", and it can be
overridden by the GIT_NOTES_REF environment variable. See
git-notes(1).
core.sparseCheckout
Enable "sparse checkout" feature. See section "Sparse checkout"
in git-read-tree(1) for more information.
core.abbrev
Set the length object names are abbreviated to. If unspecified or
set to "auto", an appropriate value is computed based on the
approximate number of packed objects in your repository, which
hopefully is enough for abbreviated object names to stay unique
for some time. The minimum length is 4.
add.ignoreErrors, add.ignore-errors (deprecated)
Tells git add to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the --ignore-errors
option of git-add(1). add.ignore-errors is deprecated, as it
does not follow the usual naming convention for configuration
variables.
alias.*
Command aliases for the git(1) command wrapper - e.g. after
defining "alias.last = cat-file commit HEAD", the invocation "git
last" is equivalent to "git cat-file commit HEAD". To avoid
confusion and troubles with script usage, aliases that hide
existing Git commands are ignored. Arguments are split by spaces,
the usual shell quoting and escaping is supported. A quote pair
or a backslash can be used to quote them.
If the alias expansion is prefixed with an exclamation point, it
will be treated as a shell command. For example, defining
"alias.new = !gitk --all --not ORIG_HEAD", the invocation "git
new" is equivalent to running the shell command "gitk --all --not
ORIG_HEAD". Note that shell commands will be executed from the
top-level directory of a repository, which may not necessarily be
the current directory. GIT_PREFIX is set as returned by running
git rev-parse --show-prefix from the original current directory.
See git-rev-parse(1).
am.keepcr
If true, git-am will call git-mailsplit for patches in mbox
format with parameter --keep-cr. In this case git-mailsplit will
not remove \r from lines ending with \r\n. Can be overridden by
giving --no-keep-cr from the command line. See git-am(1),
git-mailsplit(1).
am.threeWay
By default, git am will fail if the patch does not apply cleanly.
When set to true, this setting tells git am to fall back on 3-way
merge if the patch records the identity of blobs it is supposed
to apply to and we have those blobs available locally (equivalent
to giving the --3way option from the command line). Defaults to
false. See git-am(1).
apply.ignoreWhitespace
When set to change, tells git apply to ignore changes in
whitespace, in the same way as the --ignore-space-change option.
When set to one of: no, none, never, false tells git apply to
respect all whitespace differences. See git-apply(1).
apply.whitespace
Tells git apply how to handle whitespaces, in the same way as the
--whitespace option. See git-apply(1).
blame.showRoot
Do not treat root commits as boundaries in git-blame(1). This
option defaults to false.
blame.blankBoundary
Show blank commit object name for boundary commits in
git-blame(1). This option defaults to false.
blame.showEmail
Show the author email instead of author name in git-blame(1).
This option defaults to false.
blame.date
Specifies the format used to output dates in git-blame(1). If
unset the iso format is used. For supported values, see the
discussion of the --date option at git-log(1).
branch.autoSetupMerge
Tells git branch and git checkout to set up new branches so that
git-pull(1) will appropriately merge from the starting point
branch. Note that even if this option is not set, this behavior
can be chosen per-branch using the --track and --no-track
options. The valid settings are: false — no automatic setup is
done; true — automatic setup is done when the starting point is a
remote-tracking branch; always — automatic setup is done when
the starting point is either a local branch or remote-tracking
branch. This option defaults to true.
branch.autoSetupRebase
When a new branch is created with git branch or git checkout that
tracks another branch, this variable tells Git to set up pull to
rebase instead of merge (see "branch.<name>.rebase"). When never,
rebase is never automatically set to true. When local, rebase is
set to true for tracked branches of other local branches. When
remote, rebase is set to true for tracked branches of
remote-tracking branches. When always, rebase will be set to true
for all tracking branches. See "branch.autoSetupMerge" for
details on how to set up a branch to track another branch. This
option defaults to never.
branch.<name>.remote
When on branch <name>, it tells git fetch and git push which
remote to fetch from/push to. The remote to push to may be
overridden with remote.pushDefault (for all branches). The remote
to push to, for the current branch, may be further overridden by
branch.<name>.pushRemote. If no remote is configured, or if you
are not on any branch, it defaults to origin for fetching and
remote.pushDefault for pushing. Additionally, . (a period) is
the current local repository (a dot-repository), see
branch.<name>.merge's final note below.
branch.<name>.pushRemote
When on branch <name>, it overrides branch.<name>.remote for
pushing. It also overrides remote.pushDefault for pushing from
branch <name>. When you pull from one place (e.g. your upstream)
and push to another place (e.g. your own publishing repository),
you would want to set remote.pushDefault to specify the remote to
push to for all branches, and use this option to override it for
a specific branch.
branch.<name>.merge
Defines, together with branch.<name>.remote, the upstream branch
for the given branch. It tells git fetch/git pull/git rebase
which branch to merge and can also affect git push (see
push.default). When in branch <name>, it tells git fetch the
default refspec to be marked for merging in FETCH_HEAD. The value
is handled like the remote part of a refspec, and must match a
ref which is fetched from the remote given by
"branch.<name>.remote". The merge information is used by git pull
(which at first calls git fetch) to lookup the default branch for
merging. Without this option, git pull defaults to merge the
first refspec fetched. Specify multiple values to get an octopus
merge. If you wish to setup git pull so that it merges into
<name> from another branch in the local repository, you can point
branch.<name>.merge to the desired branch, and use the relative
path setting . (a period) for branch.<name>.remote.
branch.<name>.mergeOptions
Sets default options for merging into branch <name>. The syntax
and supported options are the same as those of git-merge(1), but
option values containing whitespace characters are currently not
supported.
branch.<name>.rebase
When true, rebase the branch <name> on top of the fetched branch,
instead of merging the default branch from the default remote
when "git pull" is run. See "pull.rebase" for doing this in a non
branch-specific manner.
When preserve, also pass --preserve-merges along to git rebase so
that locally committed merge commits will not be flattened by
running git pull.
When the value is interactive, the rebase is run in interactive
mode.
NOTE: this is a possibly dangerous operation; do not use it
unless you understand the implications (see git-rebase(1) for
details).
branch.<name>.description
Branch description, can be edited with git branch
--edit-description. Branch description is automatically added in
the format-patch cover letter or request-pull summary.
browser.<tool>.cmd
Specify the command to invoke the specified browser. The
specified command is evaluated in shell with the URLs passed as
arguments. (See git-web--browse(1).)
browser.<tool>.path
Override the path for the given tool that may be used to browse
HTML help (see -w option in git-help(1)) or a working repository
in gitweb (see git-instaweb(1)).
clean.requireForce
A boolean to make git-clean do nothing unless given -f, -i or -n.
Defaults to true.
color.branch
A boolean to enable/disable color in the output of git-branch(1).
May be set to always, false (or never) or auto (or true), in
which case colors are used only when the output is to a terminal.
If unset, then the value of color.ui is used (auto by default).
color.branch.<slot>
Use customized color for branch coloration. <slot> is one of
current (the current branch), local (a local branch), remote (a
remote-tracking branch in refs/remotes/), upstream (upstream
tracking branch), plain (other refs).
color.diff
Whether to use ANSI escape sequences to add color to patches. If
this is set to always, git-diff(1), git-log(1), and git-show(1)
will use color for all patches. If it is set to true or auto,
those commands will only use color when output is to the
terminal. If unset, then the value of color.ui is used (auto by
default).
This does not affect git-format-patch(1) or the git-diff-*
plumbing commands. Can be overridden on the command line with the
--color[=<when>] option.
diff.colorMoved
If set to either a valid <mode> or a true value, moved lines in a
diff are colored differently, for details of valid modes see
--color-moved in git-diff(1). If simply set to true the default
color mode will be used. When set to false, moved lines are not
colored.
color.diff.<slot>
Use customized color for diff colorization. <slot> specifies
which part of the patch to use the specified color, and is one of
context (context text - plain is a historical synonym), meta
(metainformation), frag (hunk header), func (function in hunk
header), old (removed lines), new (added lines), commit (commit
headers), whitespace (highlighting whitespace errors), oldMoved
(deleted lines), newMoved (added lines), oldMovedDimmed,
oldMovedAlternative, oldMovedAlternativeDimmed, newMovedDimmed,
newMovedAlternative and newMovedAlternativeDimmed (See the <mode>
setting of --color-moved in git-diff(1) for details).
color.decorate.<slot>
Use customized color for git log --decorate output. <slot> is
one of branch, remoteBranch, tag, stash or HEAD for local
branches, remote-tracking branches, tags, stash and HEAD,
respectively.
color.grep
When set to always, always highlight matches. When false (or
never), never. When set to true or auto, use color only when the
output is written to the terminal. If unset, then the value of
color.ui is used (auto by default).
color.grep.<slot>
Use customized color for grep colorization. <slot> specifies
which part of the line to use the specified color, and is one of
context
non-matching text in context lines (when using -A, -B, or -C)
filename
filename prefix (when not using -h)
function
function name lines (when using -p)
linenumber
line number prefix (when using -n)
match
matching text (same as setting matchContext and
matchSelected)
matchContext
matching text in context lines
matchSelected
matching text in selected lines
selected
non-matching text in selected lines
separator
separators between fields on a line (:, -, and =) and between
hunks (--)
color.interactive
When set to always, always use colors for interactive prompts and
displays (such as those used by "git-add --interactive" and
"git-clean --interactive"). When false (or never), never. When
set to true or auto, use colors only when the output is to the
terminal. If unset, then the value of color.ui is used (auto by
default).
color.interactive.<slot>
Use customized color for git add --interactive and git clean
--interactive output. <slot> may be prompt, header, help or
error, for four distinct types of normal output from interactive
commands.
color.pager
A boolean to enable/disable colored output when the pager is in
use (default is true).
color.showBranch
A boolean to enable/disable color in the output of
git-show-branch(1). May be set to always, false (or never) or
auto (or true), in which case colors are used only when the
output is to a terminal. If unset, then the value of color.ui is
used (auto by default).
color.status
A boolean to enable/disable color in the output of git-status(1).
May be set to always, false (or never) or auto (or true), in
which case colors are used only when the output is to a terminal.
If unset, then the value of color.ui is used (auto by default).
color.status.<slot>
Use customized color for status colorization. <slot> is one of
header (the header text of the status message), added or updated
(files which are added but not committed), changed (files which
are changed but not added in the index), untracked (files which
are not tracked by Git), branch (the current branch), nobranch
(the color the no branch warning is shown in, defaulting to red),
localBranch or remoteBranch (the local and remote branch names,
respectively, when branch and tracking information is displayed
in the status short-format), or unmerged (files which have
unmerged changes).
color.ui
This variable determines the default value for variables such as
color.diff and color.grep that control the use of color per
command family. Its scope will expand as more commands learn
configuration to set a default for the --color option. Set it to
false or never if you prefer Git commands not to use color unless
enabled explicitly with some other configuration or the --color
option. Set it to always if you want all output not intended for
machine consumption to use color, to true or auto (this is the
default since Git 1.8.4) if you want such output to use color
when written to the terminal.
column.ui
Specify whether supported commands should output in columns. This
variable consists of a list of tokens separated by spaces or
commas:
These options control when the feature should be enabled
(defaults to never):
always
always show in columns
never
never show in columns
auto
show in columns if the output is to the terminal
These options control layout (defaults to column). Setting any of
these implies always if none of always, never, or auto are
specified.
column
fill columns before rows
row
fill rows before columns
plain
show in one column
Finally, these options can be combined with a layout option
(defaults to nodense):
dense
make unequal size columns to utilize more space
nodense
make equal size columns
column.branch
Specify whether to output branch listing in git branch in
columns. See column.ui for details.
column.clean
Specify the layout when list items in git clean -i, which always
shows files and directories in columns. See column.ui for
details.
column.status
Specify whether to output untracked files in git status in
columns. See column.ui for details.
column.tag
Specify whether to output tag listing in git tag in columns. See
column.ui for details.
commit.cleanup
This setting overrides the default of the --cleanup option in git
commit. See git-commit(1) for details. Changing the default can
be useful when you always want to keep lines that begin with
comment character # in your log message, in which case you would
do git config commit.cleanup whitespace (note that you will have
to remove the help lines that begin with # in the commit log
template yourself, if you do this).
commit.gpgSign
A boolean to specify whether all commits should be GPG signed.
Use of this option when doing operations such as rebase can
result in a large number of commits being signed. It may be
convenient to use an agent to avoid typing your GPG passphrase
several times.
commit.status
A boolean to enable/disable inclusion of status information in
the commit message template when using an editor to prepare the
commit message. Defaults to true.
commit.template
Specify the pathname of a file to use as the template for new
commit messages.
commit.verbose
A boolean or int to specify the level of verbose with git commit.
See git-commit(1).
credential.helper
Specify an external helper to be called when a username or
password credential is needed; the helper may consult external
storage to avoid prompting the user for the credentials. Note
that multiple helpers may be defined. See gitcredentials(7) for
details.
credential.useHttpPath
When acquiring credentials, consider the "path" component of an
http or https URL to be important. Defaults to false. See
gitcredentials(7) for more information.
credential.username
If no username is set for a network authentication, use this
username by default. See credential.<context>.* below, and
gitcredentials(7).
credential.<url>.*
Any of the credential.* options above can be applied selectively
to some credentials. For example
"credential.https://example.com.username" would set the default
username only for https connections to example.com. See
gitcredentials(7) for details on how URLs are matched.
credentialCache.ignoreSIGHUP
Tell git-credential-cache—daemon to ignore SIGHUP, instead of
quitting.
diff.autoRefreshIndex
When using git diff to compare with work tree files, do not
consider stat-only change as changed. Instead, silently run git
update-index --refresh to update the cached stat information for
paths whose contents in the work tree match the contents in the
index. This option defaults to true. Note that this affects only
git diff Porcelain, and not lower level diff commands such as git
diff-files.
diff.dirstat
A comma separated list of --dirstat parameters specifying the
default behavior of the --dirstat option to git-diff(1)` and
friends. The defaults can be overridden on the command line
(using --dirstat=<param1,param2,...>). The fallback defaults
(when not changed by diff.dirstat) are changes,noncumulative,3.
The following parameters are available:
changes
Compute the dirstat numbers by counting the lines that have
been removed from the source, or added to the destination.
This ignores the amount of pure code movements within a file.
In other words, rearranging lines in a file is not counted as
much as other changes. This is the default behavior when no
parameter is given.
lines
Compute the dirstat numbers by doing the regular line-based
diff analysis, and summing the removed/added line counts.
(For binary files, count 64-byte chunks instead, since binary
files have no natural concept of lines). This is a more
expensive --dirstat behavior than the changes behavior, but
it does count rearranged lines within a file as much as other
changes. The resulting output is consistent with what you get
from the other --*stat options.
files
Compute the dirstat numbers by counting the number of files
changed. Each changed file counts equally in the dirstat
analysis. This is the computationally cheapest --dirstat
behavior, since it does not have to look at the file contents
at all.
cumulative
Count changes in a child directory for the parent directory
as well. Note that when using cumulative, the sum of the
percentages reported may exceed 100%. The default
(non-cumulative) behavior can be specified with the
noncumulative parameter.
<limit>
An integer parameter specifies a cut-off percent (3% by
default). Directories contributing less than this percentage
of the changes are not shown in the output.
Example: The following will count changed files, while ignoring
directories with less than 10% of the total amount of changed
files, and accumulating child directory counts in the parent
directories: files,10,cumulative.
diff.statGraphWidth
Limit the width of the graph part in --stat output. If set,
applies to all commands generating --stat output except
format-patch.
diff.context
Generate diffs with <n> lines of context instead of the default
of 3. This value is overridden by the -U option.
diff.interHunkContext
Show the context between diff hunks, up to the specified number
of lines, thereby fusing the hunks that are close to each other.
This value serves as the default for the --inter-hunk-context
command line option.
diff.external
If this config variable is set, diff generation is not performed
using the internal diff machinery, but using the given command.
Can be overridden with the ‘GIT_EXTERNAL_DIFF’ environment
variable. The command is called with parameters as described
under "git Diffs" in git(1). Note: if you want to use an external
diff program only on a subset of your files, you might want to
use gitattributes(5) instead.
diff.ignoreSubmodules
Sets the default value of --ignore-submodules. Note that this
affects only git diff Porcelain, and not lower level diff
commands such as git diff-files. git checkout also honors this
setting when reporting uncommitted changes. Setting it to all
disables the submodule summary normally shown by git commit and
git status when status.submoduleSummary is set unless it is
overridden by using the --ignore-submodules command-line option.
The git submodule commands are not affected by this setting.
diff.mnemonicPrefix
If set, git diff uses a prefix pair that is different from the
standard "a/" and "b/" depending on what is being compared. When
this configuration is in effect, reverse diff output also swaps
the order of the prefixes:
git diff
compares the (i)ndex and the (w)ork tree;
git diff HEAD
compares a (c)ommit and the (w)ork tree;
git diff --cached
compares a (c)ommit and the (i)ndex;
git diff HEAD:file1 file2
compares an (o)bject and a (w)ork tree entity;
git diff --no-index a b
compares two non-git things (1) and (2).
diff.noprefix
If set, git diff does not show any source or destination prefix.
diff.orderFile
File indicating how to order files within a diff. See the -O
option to git-diff(1) for details. If diff.orderFile is a
relative pathname, it is treated as relative to the top of the
working tree.
diff.renameLimit
The number of files to consider when performing the copy/rename
detection; equivalent to the git diff option -l.
diff.renames
Whether and how Git detects renames. If set to "false", rename
detection is disabled. If set to "true", basic rename detection
is enabled. If set to "copies" or "copy", Git will detect copies,
as well. Defaults to true. Note that this affects only git diff
Porcelain like git-diff(1) and git-log(1), and not lower level
commands such as git-diff-files(1).
diff.suppressBlankEmpty
A boolean to inhibit the standard behavior of printing a space
before each empty output line. Defaults to false.
diff.submodule
Specify the format in which differences in submodules are shown.
The "short" format just shows the names of the commits at the
beginning and end of the range. The "log" format lists the
commits in the range like git-submodule(1) summary does. The
"diff" format shows an inline diff of the changed contents of the
submodule. Defaults to "short".
diff.wordRegex
A POSIX Extended Regular Expression used to determine what is a
"word" when performing word-by-word difference calculations.
Character sequences that match the regular expression are
"words", all other characters are ignorable whitespace.
diff.<driver>.command
The custom diff driver command. See gitattributes(5) for details.
diff.<driver>.xfuncname
The regular expression that the diff driver should use to
recognize the hunk header. A built-in pattern may also be used.
See gitattributes(5) for details.
diff.<driver>.binary
Set this option to true to make the diff driver treat files as
binary. See gitattributes(5) for details.
diff.<driver>.textconv
The command that the diff driver should call to generate the
text-converted version of a file. The result of the conversion is
used to generate a human-readable diff. See gitattributes(5) for
details.
diff.<driver>.wordRegex
The regular expression that the diff driver should use to split
words in a line. See gitattributes(5) for details.
diff.<driver>.cachetextconv
Set this option to true to make the diff driver cache the text
conversion outputs. See gitattributes(5) for details.
diff.tool
Controls which diff tool is used by git-difftool(1). This
variable overrides the value configured in merge.tool. The list
below shows the valid built-in values. Any other value is treated
as a custom diff tool and requires that a corresponding
difftool.<tool>.cmd variable is defined.
· araxis
· bc
· bc3
· codecompare
· deltawalker
· diffmerge
· diffuse
· ecmerge
· emerge
· examdiff
· gvimdiff
· gvimdiff2
· gvimdiff3
· kdiff3
· kompare
· meld
· opendiff
· p4merge
· tkdiff
· vimdiff
· vimdiff2
· vimdiff3
· winmerge
· xxdiff
diff.indentHeuristic
Set this option to true to enable experimental heuristics that
shift diff hunk boundaries to make patches easier to read.
diff.algorithm
Choose a diff algorithm. The variants are as follows:
default, myers
The basic greedy diff algorithm. Currently, this is the
default.
minimal
Spend extra time to make sure the smallest possible diff is
produced.
patience
Use "patience diff" algorithm when generating patches.
histogram
This algorithm extends the patience algorithm to "support
low-occurrence common elements".
diff.wsErrorHighlight
Highlight whitespace errors in the context, old or new lines of
the diff. Multiple values are separated by comma, none resets
previous values, default reset the list to new and all is a
shorthand for old,new,context. The whitespace errors are colored
with color.diff.whitespace. The command line option
--ws-error-highlight=<kind> overrides this setting.
difftool.<tool>.path
Override the path for the given tool. This is useful in case your
tool is not in the PATH.
difftool.<tool>.cmd
Specify the command to invoke the specified diff tool. The
specified command is evaluated in shell with the following
variables available: LOCAL is set to the name of the temporary
file containing the contents of the diff pre-image and REMOTE is
set to the name of the temporary file containing the contents of
the diff post-image.
difftool.prompt
Prompt before each invocation of the diff tool.
fastimport.unpackLimit
If the number of objects imported by git-fast-import(1) is below
this limit, then the objects will be unpacked into loose object
files. However if the number of imported objects equals or
exceeds this limit then the pack will be stored as a pack.
Storing the pack from a fast-import can make the import operation
complete faster, especially on slow filesystems. If not set, the
value of transfer.unpackLimit is used instead.
fetch.recurseSubmodules
This option can be either set to a boolean value or to on-demand.
Setting it to a boolean changes the behavior of fetch and pull to
unconditionally recurse into submodules when set to true or to
not recurse at all when set to false. When set to on-demand (the
default value), fetch and pull will only recurse into a populated
submodule when its superproject retrieves a commit that updates
the submodule’s reference.
fetch.fsckObjects
If it is set to true, git-fetch-pack will check all fetched
objects. It will abort in the case of a malformed object or a
broken link. The result of an abort are only dangling objects.
Defaults to false. If not set, the value of transfer.fsckObjects
is used instead.
fetch.unpackLimit
If the number of objects fetched over the Git native transfer is
below this limit, then the objects will be unpacked into loose
object files. However if the number of received objects equals or
exceeds this limit then the received pack will be stored as a
pack, after adding any missing delta bases. Storing the pack from
a push can make the push operation complete faster, especially on
slow filesystems. If not set, the value of transfer.unpackLimit
is used instead.
fetch.prune
If true, fetch will automatically behave as if the --prune option
was given on the command line. See also remote.<name>.prune.
fetch.output
Control how ref update status is printed. Valid values are full
and compact. Default value is full. See section OUTPUT in
git-fetch(1) for detail.
format.attach
Enable multipart/mixed attachments as the default for
format-patch. The value can also be a double quoted string which
will enable attachments as the default and set the value as the
boundary. See the --attach option in git-format-patch(1).
format.from
Provides the default value for the --from option to format-patch.
Accepts a boolean value, or a name and email address. If false,
format-patch defaults to --no-from, using commit authors directly
in the "From:" field of patch mails. If true, format-patch
defaults to --from, using your committer identity in the "From:"
field of patch mails and including a "From:" field in the body of
the patch mail if different. If set to a non-boolean value,
format-patch uses that value instead of your committer identity.
Defaults to false.
format.numbered
A boolean which can enable or disable sequence numbers in patch
subjects. It defaults to "auto" which enables it only if there is
more than one patch. It can be enabled or disabled for all
messages by setting it to "true" or "false". See --numbered
option in git-format-patch(1).
format.headers
Additional email headers to include in a patch to be submitted by
mail. See git-format-patch(1).
format.to, format.cc
Additional recipients to include in a patch to be submitted by
mail. See the --to and --cc options in git-format-patch(1).
format.subjectPrefix
The default for format-patch is to output files with the [PATCH]
subject prefix. Use this variable to change that prefix.
format.signature
The default for format-patch is to output a signature containing
the Git version number. Use this variable to change that default.
Set this variable to the empty string ("") to suppress signature
generation.
format.signatureFile
Works just like format.signature except the contents of the file
specified by this variable will be used as the signature.
format.suffix
The default for format-patch is to output files with the suffix
.patch. Use this variable to change that suffix (make sure to
include the dot if you want it).
format.pretty
The default pretty format for log/show/whatchanged command, See
git-log(1), git-show(1), git-whatchanged(1).
format.thread
The default threading style for git format-patch. Can be a
boolean value, or shallow or deep. shallow threading makes every
mail a reply to the head of the series, where the head is chosen
from the cover letter, the --in-reply-to, and the first patch
mail, in this order. deep threading makes every mail a reply to
the previous one. A true boolean value is the same as shallow,
and a false value disables threading.
format.signOff
A boolean value which lets you enable the -s/--signoff option of
format-patch by default. Note: Adding the Signed-off-by: line to
a patch should be a conscious act and means that you certify you
have the rights to submit this work under the same open source
license. Please see the SubmittingPatches document for further
discussion.
format.coverLetter
A boolean that controls whether to generate a cover-letter when
format-patch is invoked, but in addition can be set to "auto", to
generate a cover-letter only when there’s more than one patch.
format.outputDirectory
Set a custom directory to store the resulting files instead of
the current working directory.
format.useAutoBase
A boolean value which lets you enable the --base=auto option of
format-patch by default.
filter.<driver>.clean
The command which is used to convert the content of a worktree
file to a blob upon checkin. See gitattributes(5) for details.
filter.<driver>.smudge
The command which is used to convert the content of a blob object
to a worktree file upon checkout. See gitattributes(5) for
details.
fsck.<msg-id>
Allows overriding the message type (error, warn or ignore) of a
specific message ID such as missingEmail.
For convenience, fsck prefixes the error/warning with the message
ID, e.g. "missingEmail: invalid author/committer line - missing
email" means that setting fsck.missingEmail = ignore will hide
that issue.
This feature is intended to support working with legacy
repositories which cannot be repaired without disruptive changes.
fsck.skipList
The path to a sorted list of object names (i.e. one SHA-1 per
line) that are known to be broken in a non-fatal way and should
be ignored. This feature is useful when an established project
should be accepted despite early commits containing errors that
can be safely ignored such as invalid committer email addresses.
Note: corrupt objects cannot be skipped with this setting.
gc.aggressiveDepth
The depth parameter used in the delta compression algorithm used
by git gc --aggressive. This defaults to 50.
gc.aggressiveWindow
The window size parameter used in the delta compression algorithm
used by git gc --aggressive. This defaults to 250.
gc.auto
When there are approximately more than this many loose objects in
the repository, git gc --auto will pack them. Some Porcelain
commands use this command to perform a light-weight garbage
collection from time to time. The default value is 6700. Setting
this to 0 disables it.
gc.autoPackLimit
When there are more than this many packs that are not marked with
*.keep file in the repository, git gc --auto consolidates them
into one larger pack. The default value is 50. Setting this to 0
disables it.
gc.autoDetach
Make git gc --auto return immediately and run in background if
the system supports it. Default is true.
gc.logExpiry
If the file gc.log exists, then git gc --auto won’t run unless
that file is more than gc.logExpiry old. Default is "1.day". See
gc.pruneExpire for more ways to specify its value.
gc.packRefs
Running git pack-refs in a repository renders it unclonable by
Git versions prior to 1.5.1.2 over dumb transports such as HTTP.
This variable determines whether git gc runs git pack-refs. This
can be set to notbare to enable it within all non-bare repos or
it can be set to a boolean value. The default is true.
gc.pruneExpire
When git gc is run, it will call prune --expire 2.weeks.ago.
Override the grace period with this config variable. The value
"now" may be used to disable this grace period and always prune
unreachable objects immediately, or "never" may be used to
suppress pruning. This feature helps prevent corruption when git
gc runs concurrently with another process writing to the
repository; see the "NOTES" section of git-gc(1).
gc.worktreePruneExpire
When git gc is run, it calls git worktree prune --expire
3.months.ago. This config variable can be used to set a different
grace period. The value "now" may be used to disable the grace
period and prune $GIT_DIR/worktrees immediately, or "never" may
be used to suppress pruning.
gc.reflogExpire, gc.<pattern>.reflogExpire
git reflog expire removes reflog entries older than this time;
defaults to 90 days. The value "now" expires all entries
immediately, and "never" suppresses expiration altogether. With
"<pattern>" (e.g. "refs/stash") in the middle the setting applies
only to the refs that match the <pattern>.
gc.reflogExpireUnreachable, gc.<pattern>.reflogExpireUnreachable
git reflog expire removes reflog entries older than this time and
are not reachable from the current tip; defaults to 30 days. The
value "now" expires all entries immediately, and "never"
suppresses expiration altogether. With "<pattern>" (e.g.
"refs/stash") in the middle, the setting applies only to the refs
that match the <pattern>.
gc.rerereResolved
Records of conflicted merge you resolved earlier are kept for
this many days when git rerere gc is run. You can also use more
human-readable "1.month.ago", etc. The default is 60 days. See
git-rerere(1).
gc.rerereUnresolved
Records of conflicted merge you have not resolved are kept for
this many days when git rerere gc is run. You can also use more
human-readable "1.month.ago", etc. The default is 15 days. See
git-rerere(1).
gitcvs.commitMsgAnnotation
Append this string to each commit message. Set to empty string to
disable this feature. Defaults to "via git-CVS emulator".
gitcvs.enabled
Whether the CVS server interface is enabled for this repository.
See git-cvsserver(1).
gitcvs.logFile
Path to a log file where the CVS server interface well... logs
various stuff. See git-cvsserver(1).
gitcvs.usecrlfattr
If true, the server will look up the end-of-line conversion
attributes for files to determine the -k modes to use. If the
attributes force Git to treat a file as text, the -k mode will be
left blank so CVS clients will treat it as text. If they suppress
text conversion, the file will be set with -kb mode, which
suppresses any newline munging the client might otherwise do. If
the attributes do not allow the file type to be determined, then
gitcvs.allBinary is used. See gitattributes(5).
gitcvs.allBinary
This is used if gitcvs.usecrlfattr does not resolve the correct
-kb mode to use. If true, all unresolved files are sent to the
client in mode -kb. This causes the client to treat them as
binary files, which suppresses any newline munging it otherwise
might do. Alternatively, if it is set to "guess", then the
contents of the file are examined to decide if it is binary,
similar to core.autocrlf.
gitcvs.dbName
Database used by git-cvsserver to cache revision information
derived from the Git repository. The exact meaning depends on the
used database driver, for SQLite (which is the default driver)
this is a filename. Supports variable substitution (see
git-cvsserver(1) for details). May not contain semicolons (;).
Default: %Ggitcvs.%m.sqlite
gitcvs.dbDriver
Used Perl DBI driver. You can specify any available driver for
this here, but it might not work. git-cvsserver is tested with
DBD::SQLite, reported to work with DBD::Pg, and reported not to
work with DBD::mysql. Experimental feature. May not contain
double colons (:). Default: SQLite. See git-cvsserver(1).
gitcvs.dbUser, gitcvs.dbPass
Database user and password. Only useful if setting
gitcvs.dbDriver, since SQLite has no concept of database users
and/or passwords. gitcvs.dbUser supports variable substitution
(see git-cvsserver(1) for details).
gitcvs.dbTableNamePrefix
Database table name prefix. Prepended to the names of any
database tables used, allowing a single database to be used for
several repositories. Supports variable substitution (see
git-cvsserver(1) for details). Any non-alphabetic characters will
be replaced with underscores.
All gitcvs variables except for gitcvs.usecrlfattr and
gitcvs.allBinary can also be specified as
gitcvs.<access_method>.<varname> (where access_method is one of "ext"
and "pserver") to make them apply only for the given access method.
gitweb.category, gitweb.description, gitweb.owner, gitweb.url
See gitweb(1) for description.
gitweb.avatar, gitweb.blame, gitweb.grep, gitweb.highlight,
gitweb.patches, gitweb.pickaxe, gitweb.remote_heads,
gitweb.showSizes, gitweb.snapshot
See gitweb.conf(5) for description.
grep.lineNumber
If set to true, enable -n option by default.
grep.patternType
Set the default matching behavior. Using a value of basic,
extended, fixed, or perl will enable the --basic-regexp,
--extended-regexp, --fixed-strings, or --perl-regexp option
accordingly, while the value default will return to the default
matching behavior.
grep.extendedRegexp
If set to true, enable --extended-regexp option by default. This
option is ignored when the grep.patternType option is set to a
value other than default.
grep.threads
Number of grep worker threads to use. See grep.threads in
git-grep(1) for more information.
grep.fallbackToNoIndex
If set to true, fall back to git grep --no-index if git grep is
executed outside of a git repository. Defaults to false.
gpg.program
Use this custom program instead of "gpg" found on $PATH when
making or verifying a PGP signature. The program must support the
same command-line interface as GPG, namely, to verify a detached
signature, "gpg --verify $file - <$signature" is run, and the
program is expected to signal a good signature by exiting with
code 0, and to generate an ASCII-armored detached signature, the
standard input of "gpg -bsau $key" is fed with the contents to be
signed, and the program is expected to send the result to its
standard output.
gui.commitMsgWidth
Defines how wide the commit message window is in the git-gui(1).
"75" is the default.
gui.diffContext
Specifies how many context lines should be used in calls to diff
made by the git-gui(1). The default is "5".
gui.displayUntracked
Determines if git-gui(1) shows untracked files in the file list.
The default is "true".
gui.encoding
Specifies the default encoding to use for displaying of file
contents in git-gui(1) and gitk(1). It can be overridden by
setting the encoding attribute for relevant files (see
gitattributes(5)). If this option is not set, the tools default
to the locale encoding.
gui.matchTrackingBranch
Determines if new branches created with git-gui(1) should default
to tracking remote branches with matching names or not. Default:
"false".
gui.newBranchTemplate
Is used as suggested name when creating new branches using the
git-gui(1).
gui.pruneDuringFetch
"true" if git-gui(1) should prune remote-tracking branches when
performing a fetch. The default value is "false".
gui.trustmtime
Determines if git-gui(1) should trust the file modification
timestamp or not. By default the timestamps are not trusted.
gui.spellingDictionary
Specifies the dictionary used for spell checking commit messages
in the git-gui(1). When set to "none" spell checking is turned
off.
gui.fastCopyBlame
If true, git gui blame uses -C instead of -C -C for original
location detection. It makes blame significantly faster on huge
repositories at the expense of less thorough copy detection.
gui.copyBlameThreshold
Specifies the threshold to use in git gui blame original location
detection, measured in alphanumeric characters. See the
git-blame(1) manual for more information on copy detection.
gui.blamehistoryctx
Specifies the radius of history context in days to show in
gitk(1) for the selected commit, when the Show History Context
menu item is invoked from git gui blame. If this variable is set
to zero, the whole history is shown.
guitool.<name>.cmd
Specifies the shell command line to execute when the
corresponding item of the git-gui(1) Tools menu is invoked. This
option is mandatory for every tool. The command is executed from
the root of the working directory, and in the environment it
receives the name of the tool as GIT_GUITOOL, the name of the
currently selected file as FILENAME, and the name of the current
branch as CUR_BRANCH (if the head is detached, CUR_BRANCH is
empty).
guitool.<name>.needsFile
Run the tool only if a diff is selected in the GUI. It guarantees
that FILENAME is not empty.
guitool.<name>.noConsole
Run the command silently, without creating a window to display
its output.
guitool.<name>.noRescan
Don’t rescan the working directory for changes after the tool
finishes execution.
guitool.<name>.confirm
Show a confirmation dialog before actually running the tool.
guitool.<name>.argPrompt
Request a string argument from the user, and pass it to the tool
through the ARGS environment variable. Since requesting an
argument implies confirmation, the confirm option has no effect
if this is enabled. If the option is set to true, yes, or 1, the
dialog uses a built-in generic prompt; otherwise the exact value
of the variable is used.
guitool.<name>.revPrompt
Request a single valid revision from the user, and set the
REVISION environment variable. In other aspects this option is
similar to argPrompt, and can be used together with it.
guitool.<name>.revUnmerged
Show only unmerged branches in the revPrompt subdialog. This is
useful for tools similar to merge or rebase, but not for things
like checkout or reset.
guitool.<name>.title
Specifies the title to use for the prompt dialog. The default is
the tool name.
guitool.<name>.prompt
Specifies the general prompt string to display at the top of the
dialog, before subsections for argPrompt and revPrompt. The
default value includes the actual command.
help.browser
Specify the browser that will be used to display help in the web
format. See git-help(1).
help.format
Override the default help format used by git-help(1). Values man,
info, web and html are supported. man is the default. web and
html are the same.
help.autoCorrect
Automatically correct and execute mistyped commands after waiting
for the given number of deciseconds (0.1 sec). If more than one
command can be deduced from the entered text, nothing will be
executed. If the value of this option is negative, the corrected
command will be executed immediately. If the value is 0 - the
command will be just shown but not executed. This is the default.
help.htmlPath
Specify the path where the HTML documentation resides. File
system paths and URLs are supported. HTML pages will be prefixed
with this path when help is displayed in the web format. This
defaults to the documentation path of your Git installation.
http.proxy
Override the HTTP proxy, normally configured using the
http_proxy, https_proxy, and all_proxy environment variables (see
curl(1)). In addition to the syntax understood by curl, it is
possible to specify a proxy string with a user name but no
password, in which case git will attempt to acquire one in the
same way it does for other credentials. See gitcredentials(7) for
more information. The syntax thus is
[protocol://][user[:password]@]proxyhost[:port]. This can be
overridden on a per-remote basis; see remote.<name>.proxy
http.proxyAuthMethod
Set the method with which to authenticate against the HTTP proxy.
This only takes effect if the configured proxy string contains a
user name part (i.e. is of the form user@host or user@host:port).
This can be overridden on a per-remote basis; see
remote.<name>.proxyAuthMethod. Both can be overridden by the
GIT_HTTP_PROXY_AUTHMETHOD environment variable. Possible values
are:
· anyauth - Automatically pick a suitable authentication
method. It is assumed that the proxy answers an
unauthenticated request with a 407 status code and one or
more Proxy-authenticate headers with supported authentication
methods. This is the default.
· basic - HTTP Basic authentication
· digest - HTTP Digest authentication; this prevents the
password from being transmitted to the proxy in clear text
· negotiate - GSS-Negotiate authentication (compare the
--negotiate option of curl(1))
· ntlm - NTLM authentication (compare the --ntlm option of
curl(1))
http.emptyAuth
Attempt authentication without seeking a username or password.
This can be used to attempt GSS-Negotiate authentication without
specifying a username in the URL, as libcurl normally requires a
username for authentication.
http.delegation
Control GSSAPI credential delegation. The delegation is disabled
by default in libcurl since version 7.21.7. Set parameter to tell
the server what it is allowed to delegate when it comes to user
credentials. Used with GSS/kerberos. Possible values are:
· none - Don’t allow any delegation.
· policy - Delegates if and only if the OK-AS-DELEGATE flag is
set in the Kerberos service ticket, which is a matter of
realm policy.
· always - Unconditionally allow the server to delegate.
http.extraHeader
Pass an additional HTTP header when communicating with a server.
If more than one such entry exists, all of them are added as
extra headers. To allow overriding the settings inherited from
the system config, an empty value will reset the extra headers to
the empty list.
http.cookieFile
The pathname of a file containing previously stored cookie lines,
which should be used in the Git http session, if they match the
server. The file format of the file to read cookies from should
be plain HTTP headers or the Netscape/Mozilla cookie file format
(see curl(1)). NOTE that the file specified with http.cookieFile
is used only as input unless http.saveCookies is set.
http.saveCookies
If set, store cookies received during requests to the file
specified by http.cookieFile. Has no effect if http.cookieFile is
unset.
http.sslVersion
The SSL version to use when negotiating an SSL connection, if you
want to force the default. The available and default version
depend on whether libcurl was built against NSS or OpenSSL and
the particular configuration of the crypto library in use.
Internally this sets the CURLOPT_SSL_VERSION option; see the
libcurl documentation for more details on the format of this
option and for the ssl version supported. Actually the possible
values of this option are:
· sslv2
· sslv3
· tlsv1
· tlsv1.0
· tlsv1.1
· tlsv1.2
Can be overridden by the GIT_SSL_VERSION environment variable. To
force git to use libcurl’s default ssl version and ignore any
explicit http.sslversion option, set GIT_SSL_VERSION to the empty
string.
http.sslCipherList
A list of SSL ciphers to use when negotiating an SSL connection.
The available ciphers depend on whether libcurl was built against
NSS or OpenSSL and the particular configuration of the crypto
library in use. Internally this sets the CURLOPT_SSL_CIPHER_LIST
option; see the libcurl documentation for more details on the
format of this list.
Can be overridden by the GIT_SSL_CIPHER_LIST environment
variable. To force git to use libcurl’s default cipher list and
ignore any explicit http.sslCipherList option, set
GIT_SSL_CIPHER_LIST to the empty string.
http.sslVerify
Whether to verify the SSL certificate when fetching or pushing
over HTTPS. Defaults to true. Can be overridden by the
GIT_SSL_NO_VERIFY environment variable.
http.sslCert
File containing the SSL certificate when fetching or pushing over
HTTPS. Can be overridden by the GIT_SSL_CERT environment
variable.
http.sslKey
File containing the SSL private key when fetching or pushing over
HTTPS. Can be overridden by the GIT_SSL_KEY environment variable.
http.sslCertPasswordProtected
Enable Git’s password prompt for the SSL certificate. Otherwise
OpenSSL will prompt the user, possibly many times, if the
certificate or private key is encrypted. Can be overridden by the
GIT_SSL_CERT_PASSWORD_PROTECTED environment variable.
http.sslCAInfo
File containing the certificates to verify the peer with when
fetching or pushing over HTTPS. Can be overridden by the
GIT_SSL_CAINFO environment variable.
http.sslCAPath
Path containing files with the CA certificates to verify the peer
with when fetching or pushing over HTTPS. Can be overridden by
the GIT_SSL_CAPATH environment variable.
http.pinnedpubkey
Public key of the https service. It may either be the filename of
a PEM or DER encoded public key file or a string starting with
sha256// followed by the base64 encoded sha256 hash of the public
key. See also libcurl CURLOPT_PINNEDPUBLICKEY. git will exit with
an error if this option is set but not supported by cURL.
http.sslTry
Attempt to use AUTH SSL/TLS and encrypted data transfers when
connecting via regular FTP protocol. This might be needed if the
FTP server requires it for security reasons or you wish to
connect securely whenever remote FTP server supports it. Default
is false since it might trigger certificate verification errors
on misconfigured servers.
http.maxRequests
How many HTTP requests to launch in parallel. Can be overridden
by the GIT_HTTP_MAX_REQUESTS environment variable. Default is 5.
http.minSessions
The number of curl sessions (counted across slots) to be kept
across requests. They will not be ended with curl_easy_cleanup()
until http_cleanup() is invoked. If USE_CURL_MULTI is not
defined, this value will be capped at 1. Defaults to 1.
http.postBuffer
Maximum size in bytes of the buffer used by smart HTTP transports
when POSTing data to the remote system. For requests larger than
this buffer size, HTTP/1.1 and Transfer-Encoding: chunked is used
to avoid creating a massive pack file locally. Default is 1 MiB,
which is sufficient for most requests.
http.lowSpeedLimit, http.lowSpeedTime
If the HTTP transfer speed is less than http.lowSpeedLimit for
longer than http.lowSpeedTime seconds, the transfer is aborted.
Can be overridden by the GIT_HTTP_LOW_SPEED_LIMIT and
GIT_HTTP_LOW_SPEED_TIME environment variables.
http.noEPSV
A boolean which disables using of EPSV ftp command by curl. This
can helpful with some "poor" ftp servers which don’t support EPSV
mode. Can be overridden by the GIT_CURL_FTP_NO_EPSV environment
variable. Default is false (curl will use EPSV).
http.userAgent
The HTTP USER_AGENT string presented to an HTTP server. The
default value represents the version of the client Git such as
git/1.7.1. This option allows you to override this value to a
more common value such as Mozilla/4.0. This may be necessary, for
instance, if connecting through a firewall that restricts HTTP
connections to a set of common USER_AGENT strings (but not
including those like git/1.7.1). Can be overridden by the
GIT_HTTP_USER_AGENT environment variable.
http.followRedirects
Whether git should follow HTTP redirects. If set to true, git
will transparently follow any redirect issued by a server it
encounters. If set to false, git will treat all redirects as
errors. If set to initial, git will follow redirects only for the
initial request to a remote, but not for subsequent follow-up
HTTP requests. Since git uses the redirected URL as the base for
the follow-up requests, this is generally sufficient. The default
is initial.
http.<url>.*
Any of the http.* options above can be applied selectively to
some URLs. For a config key to match a URL, each element of the
config key is compared to that of the URL, in the following
order:
1. Scheme (e.g., https in https://example.com/ ). This field must
match exactly between the config key and the URL.
2. Host/domain name (e.g., example.com in https://example.com/ ).
This field must match between the config key and the URL. It
is possible to specify a * as part of the host name to match
all subdomains at this level. https://*.example.com/ for
example would match https://foo.example.com/ , but not
https://foo.bar.example.com/ .
3. Port number (e.g., 8080 in http://example.com:8080/ ). This
field must match exactly between the config key and the URL.
Omitted port numbers are automatically converted to the
correct default for the scheme before matching.
4. Path (e.g., repo.git in https://example.com/repo.git ). The
path field of the config key must match the path field of the
URL either exactly or as a prefix of slash-delimited path
elements. This means a config key with path foo/ matches URL
path foo/bar. A prefix can only match on a slash (/)
boundary. Longer matches take precedence (so a config key
with path foo/bar is a better match to URL path foo/bar than
a config key with just path foo/).
5. User name (e.g., user in https://user@example.com/repo.git).
If the config key has a user name it must match the user name
in the URL exactly. If the config key does not have a user
name, that config key will match a URL with any user name
(including none), but at a lower precedence than a config key
with a user name.
The list above is ordered by decreasing precedence; a URL that
matches a config key’s path is preferred to one that matches its
user name. For example, if the URL is
https://user@example.com/foo/bar a config key match of
https://example.com/foo will be preferred over a config key match
of https://user@example.com.
All URLs are normalized before attempting any matching (the
password part, if embedded in the URL, is always ignored for
matching purposes) so that equivalent URLs that are simply
spelled differently will match properly. Environment variable
settings always override any matches. The URLs that are matched
against are those given directly to Git commands. This means any
URLs visited as a result of a redirection do not participate in
matching.
ssh.variant
By default, Git determines the command line arguments to use
based on the basename of the configured SSH command (configured
using the environment variable GIT_SSH or GIT_SSH_COMMAND or the
config setting core.sshCommand). If the basename is unrecognized,
Git will attempt to detect support of OpenSSH options by first
invoking the configured SSH command with the -G (print
configuration) option and will subsequently use OpenSSH options
(if that is successful) or no options besides the host and remote
command (if it fails).
The config variable ssh.variant can be set to override this
detection. Valid values are ssh (to use OpenSSH options), plink,
putty, tortoiseplink, simple (no options except the host and
remote command). The default auto-detection can be explicitly
requested using the value auto. Any other value is treated as
ssh. This setting can also be overridden via the environment
variable GIT_SSH_VARIANT.
The current command-line parameters used for each variant are as
follows:
· ssh - [-p port] [-4] [-6] [-o option] [username@]host command
· simple - [username@]host command
· plink or putty - [-P port] [-4] [-6] [username@]host command
· tortoiseplink - [-P port] [-4] [-6] -batch [username@]host
command
Except for the simple variant, command-line parameters are likely
to change as git gains new features.
i18n.commitEncoding
Character encoding the commit messages are stored in; Git itself
does not care per se, but this information is necessary e.g. when
importing commits from emails or in the gitk graphical history
browser (and possibly at other places in the future or in other
porcelains). See e.g. git-mailinfo(1). Defaults to utf-8.
i18n.logOutputEncoding
Character encoding the commit messages are converted to when
running git log and friends.
imap
The configuration variables in the imap section are described in
git-imap-send(1).
index.version
Specify the version with which new index files should be
initialized. This does not affect existing repositories.
init.templateDir
Specify the directory from which templates will be copied. (See
the "TEMPLATE DIRECTORY" section of git-init(1).)
instaweb.browser
Specify the program that will be used to browse your working
repository in gitweb. See git-instaweb(1).
instaweb.httpd
The HTTP daemon command-line to start gitweb on your working
repository. See git-instaweb(1).
instaweb.local
If true the web server started by git-instaweb(1) will be bound
to the local IP (127.0.0.1).
instaweb.modulePath
The default module path for git-instaweb(1) to use instead of
/usr/lib/apache2/modules. Only used if httpd is Apache.
instaweb.port
The port number to bind the gitweb httpd to. See git-instaweb(1).
interactive.singleKey
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter). Currently
this is used by the --patch mode of git-add(1), git-checkout(1),
git-commit(1), git-reset(1), and git-stash(1). Note that this
setting is silently ignored if portable keystroke input is not
available; requires the Perl module Term::ReadKey.
interactive.diffFilter
When an interactive command (such as git add --patch) shows a
colorized diff, git will pipe the diff through the shell command
defined by this configuration variable. The command may mark up
the diff further for human consumption, provided that it retains
a one-to-one correspondence with the lines in the original diff.
Defaults to disabled (no filtering).
log.abbrevCommit
If true, makes git-log(1), git-show(1), and git-whatchanged(1)
assume --abbrev-commit. You may override this option with
--no-abbrev-commit.
log.date
Set the default date-time mode for the log command. Setting a
value for log.date is similar to using git log's --date option.
See git-log(1) for details.
log.decorate
Print out the ref names of any commits that are shown by the log
command. If short is specified, the ref name prefixes
refs/heads/, refs/tags/ and refs/remotes/ will not be printed. If
full is specified, the full ref name (including prefix) will be
printed. If auto is specified, then if the output is going to a
terminal, the ref names are shown as if short were given,
otherwise no ref names are shown. This is the same as the
--decorate option of the git log.
log.follow
If true, git log will act as if the --follow option was used when
a single <path> is given. This has the same limitations as
--follow, i.e. it cannot be used to follow multiple files and
does not work well on non-linear history.
log.graphColors
A list of colors, separated by commas, that can be used to draw
history lines in git log --graph.
log.showRoot
If true, the initial commit will be shown as a big creation
event. This is equivalent to a diff against an empty tree. Tools
like git-log(1) or git-whatchanged(1), which normally hide the
root commit will now show it. True by default.
log.showSignature
If true, makes git-log(1), git-show(1), and git-whatchanged(1)
assume --show-signature.
log.mailmap
If true, makes git-log(1), git-show(1), and git-whatchanged(1)
assume --use-mailmap.
mailinfo.scissors
If true, makes git-mailinfo(1) (and therefore git-am(1)) act by
default as if the --scissors option was provided on the
command-line. When active, this features removes everything from
the message body before a scissors line (i.e. consisting mainly
of ">8", "8<" and "-").
mailmap.file
The location of an augmenting mailmap file. The default mailmap,
located in the root of the repository, is loaded first, then the
mailmap file pointed to by this variable. The location of the
mailmap file may be in a repository subdirectory, or somewhere
outside of the repository itself. See git-shortlog(1) and
git-blame(1).
mailmap.blob
Like mailmap.file, but consider the value as a reference to a
blob in the repository. If both mailmap.file and mailmap.blob are
given, both are parsed, with entries from mailmap.file taking
precedence. In a bare repository, this defaults to HEAD:.mailmap.
In a non-bare repository, it defaults to empty.
man.viewer
Specify the programs that may be used to display help in the man
format. See git-help(1).
man.<tool>.cmd
Specify the command to invoke the specified man viewer. The
specified command is evaluated in shell with the man page passed
as argument. (See git-help(1).)
man.<tool>.path
Override the path for the given tool that may be used to display
help in the man format. See git-help(1).
merge.conflictStyle
Specify the style in which conflicted hunks are written out to
working tree files upon merge. The default is "merge", which
shows a <<<<<<< conflict marker, changes made by one side, a
======= marker, changes made by the other side, and then a
>>>>>>> marker. An alternate style, "diff3", adds a |||||||
marker and the original text before the ======= marker.
merge.defaultToUpstream
If merge is called without any commit argument, merge the
upstream branches configured for the current branch by using
their last observed values stored in their remote-tracking
branches. The values of the branch.<current branch>.merge that
name the branches at the remote named by branch.<current
branch>.remote are consulted, and then they are mapped via
remote.<remote>.fetch to their corresponding remote-tracking
branches, and the tips of these tracking branches are merged.
merge.ff
By default, Git does not create an extra merge commit when
merging a commit that is a descendant of the current commit.
Instead, the tip of the current branch is fast-forwarded. When
set to false, this variable tells Git to create an extra merge
commit in such a case (equivalent to giving the --no-ff option
from the command line). When set to only, only such fast-forward
merges are allowed (equivalent to giving the --ff-only option
from the command line).
merge.verifySignatures
If true, this is equivalent to the --verify-signatures command
line option. See git-merge(1) for details.
merge.branchdesc
In addition to branch names, populate the log message with the
branch description text associated with them. Defaults to false.
merge.log
In addition to branch names, populate the log message with at
most the specified number of one-line descriptions from the
actual commits that are being merged. Defaults to false, and true
is a synonym for 20.
merge.renameLimit
The number of files to consider when performing rename detection
during a merge; if not specified, defaults to the value of
diff.renameLimit.
merge.renormalize
Tell Git that canonical representation of files in the repository
has changed over time (e.g. earlier commits record text files
with CRLF line endings, but recent ones use LF line endings). In
such a repository, Git can convert the data recorded in commits
to a canonical form before performing a merge to reduce
unnecessary conflicts. For more information, see section "Merging
branches with differing checkin/checkout attributes" in
gitattributes(5).
merge.stat
Whether to print the diffstat between ORIG_HEAD and the merge
result at the end of the merge. True by default.
merge.tool
Controls which merge tool is used by git-mergetool(1). The list
below shows the valid built-in values. Any other value is treated
as a custom merge tool and requires that a corresponding
mergetool.<tool>.cmd variable is defined.
· araxis
· bc
· bc3
· codecompare
· deltawalker
· diffmerge
· diffuse
· ecmerge
· emerge
· examdiff
· gvimdiff
· gvimdiff2
· gvimdiff3
· kdiff3
· meld
· opendiff
· p4merge
· tkdiff
· tortoisemerge
· vimdiff
· vimdiff2
· vimdiff3
· winmerge
· xxdiff
merge.verbosity
Controls the amount of output shown by the recursive merge
strategy. Level 0 outputs nothing except a final error message if
conflicts were detected. Level 1 outputs only conflicts, 2
outputs conflicts and file changes. Level 5 and above outputs
debugging information. The default is level 2. Can be overridden
by the GIT_MERGE_VERBOSITY environment variable.
merge.<driver>.name
Defines a human-readable name for a custom low-level merge
driver. See gitattributes(5) for details.
merge.<driver>.driver
Defines the command that implements a custom low-level merge
driver. See gitattributes(5) for details.
merge.<driver>.recursive
Names a low-level merge driver to be used when performing an
internal merge between common ancestors. See gitattributes(5) for
details.
mergetool.<tool>.path
Override the path for the given tool. This is useful in case your
tool is not in the PATH.
mergetool.<tool>.cmd
Specify the command to invoke the specified merge tool. The
specified command is evaluated in shell with the following
variables available: BASE is the name of a temporary file
containing the common base of the files to be merged, if
available; LOCAL is the name of a temporary file containing the
contents of the file on the current branch; REMOTE is the name of
a temporary file containing the contents of the file from the
branch being merged; MERGED contains the name of the file to
which the merge tool should write the results of a successful
merge.
mergetool.<tool>.trustExitCode
For a custom merge command, specify whether the exit code of the
merge command can be used to determine whether the merge was
successful. If this is not set to true then the merge target file
timestamp is checked and the merge assumed to have been
successful if the file has been updated, otherwise the user is
prompted to indicate the success of the merge.
mergetool.meld.hasOutput
Older versions of meld do not support the --output option. Git
will attempt to detect whether meld supports --output by
inspecting the output of meld --help. Configuring
mergetool.meld.hasOutput will make Git skip these checks and use
the configured value instead. Setting mergetool.meld.hasOutput to
true tells Git to unconditionally use the --output option, and
false avoids using --output.
mergetool.keepBackup
After performing a merge, the original file with conflict markers
can be saved as a file with a .orig extension. If this variable
is set to false then this file is not preserved. Defaults to true
(i.e. keep the backup files).
mergetool.keepTemporaries
When invoking a custom merge tool, Git uses a set of temporary
files to pass to the tool. If the tool returns an error and this
variable is set to true, then these temporary files will be
preserved, otherwise they will be removed after the tool has
exited. Defaults to false.
mergetool.writeToTemp
Git writes temporary BASE, LOCAL, and REMOTE versions of
conflicting files in the worktree by default. Git will attempt to
use a temporary directory for these files when set true. Defaults
to false.
mergetool.prompt
Prompt before each invocation of the merge resolution program.
notes.mergeStrategy
Which merge strategy to choose by default when resolving notes
conflicts. Must be one of manual, ours, theirs, union, or
cat_sort_uniq. Defaults to manual. See "NOTES MERGE STRATEGIES"
section of git-notes(1) for more information on each strategy.
notes.<name>.mergeStrategy
Which merge strategy to choose when doing a notes merge into
refs/notes/<name>. This overrides the more general
"notes.mergeStrategy". See the "NOTES MERGE STRATEGIES" section
in git-notes(1) for more information on the available strategies.
notes.displayRef
The (fully qualified) refname from which to show notes when
showing commit messages. The value of this variable can be set to
a glob, in which case notes from all matching refs will be shown.
You may also specify this configuration variable several times. A
warning will be issued for refs that do not exist, but a glob
that does not match any refs is silently ignored.
This setting can be overridden with the GIT_NOTES_DISPLAY_REF
environment variable, which must be a colon separated list of
refs or globs.
The effective value of "core.notesRef" (possibly overridden by
GIT_NOTES_REF) is also implicitly added to the list of refs to be
displayed.
notes.rewrite.<command>
When rewriting commits with <command> (currently amend or rebase)
and this variable is set to true, Git automatically copies your
notes from the original to the rewritten commit. Defaults to
true, but see "notes.rewriteRef" below.
notes.rewriteMode
When copying notes during a rewrite (see the
"notes.rewrite.<command>" option), determines what to do if the
target commit already has a note. Must be one of overwrite,
concatenate, cat_sort_uniq, or ignore. Defaults to concatenate.
This setting can be overridden with the GIT_NOTES_REWRITE_MODE
environment variable.
notes.rewriteRef
When copying notes during a rewrite, specifies the (fully
qualified) ref whose notes should be copied. The ref may be a
glob, in which case notes in all matching refs will be copied.
You may also specify this configuration several times.
Does not have a default value; you must configure this variable
to enable note rewriting. Set it to refs/notes/commits to enable
rewriting for the default commit notes.
This setting can be overridden with the GIT_NOTES_REWRITE_REF
environment variable, which must be a colon separated list of
refs or globs.
pack.window
The size of the window used by git-pack-objects(1) when no window
size is given on the command line. Defaults to 10.
pack.depth
The maximum delta depth used by git-pack-objects(1) when no
maximum depth is given on the command line. Defaults to 50.
pack.windowMemory
The maximum size of memory that is consumed by each thread in
git-pack-objects(1) for pack window memory when no limit is given
on the command line. The value can be suffixed with "k", "m", or
"g". When left unconfigured (or set explicitly to 0), there will
be no limit.
pack.compression
An integer -1..9, indicating the compression level for objects in
a pack file. -1 is the zlib default. 0 means no compression, and
1..9 are various speed/size tradeoffs, 9 being slowest. If not
set, defaults to core.compression. If that is not set, defaults
to -1, the zlib default, which is "a default compromise between
speed and compression (currently equivalent to level 6)."
Note that changing the compression level will not automatically
recompress all existing objects. You can force recompression by
passing the -F option to git-repack(1).
pack.deltaCacheSize
The maximum memory in bytes used for caching deltas in
git-pack-objects(1) before writing them out to a pack. This cache
is used to speed up the writing object phase by not having to
recompute the final delta result once the best match for all
objects is found. Repacking large repositories on machines which
are tight with memory might be badly impacted by this though,
especially if this cache pushes the system into swapping. A value
of 0 means no limit. The smallest size of 1 byte may be used to
virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit
The maximum size of a delta, that is cached in
git-pack-objects(1). This cache is used to speed up the writing
object phase by not having to recompute the final delta result
once the best match for all objects is found. Defaults to 1000.
pack.threads
Specifies the number of threads to spawn when searching for best
delta matches. This requires that git-pack-objects(1) be compiled
with pthreads otherwise this option is ignored with a warning.
This is meant to reduce packing time on multiprocessor machines.
The required amount of memory for the delta search window is
however multiplied by the number of threads. Specifying 0 will
cause Git to auto-detect the number of CPU’s and set the number
of threads accordingly.
pack.indexVersion
Specify the default pack index version. Valid values are 1 for
legacy pack index used by Git versions prior to 1.5.2, and 2 for
the new pack index with capabilities for packs larger than 4 GB
as well as proper protection against the repacking of corrupted
packs. Version 2 is the default. Note that version 2 is enforced
and this config option ignored whenever the corresponding pack is
larger than 2 GB.
If you have an old Git that does not understand the version 2
*.idx file, cloning or fetching over a non native protocol (e.g.
"http") that will copy both *.pack file and corresponding *.idx
file from the other side may give you a repository that cannot be
accessed with your older version of Git. If the *.pack file is
smaller than 2 GB, however, you can use git-index-pack(1) on the
*.pack file to regenerate the *.idx file.
pack.packSizeLimit
The maximum size of a pack. This setting only affects packing to
a file when repacking, i.e. the git:// protocol is unaffected. It
can be overridden by the --max-pack-size option of git-repack(1).
Reaching this limit results in the creation of multiple
packfiles; which in turn prevents bitmaps from being created. The
minimum size allowed is limited to 1 MiB. The default is
unlimited. Common unit suffixes of k, m, or g are supported.
pack.useBitmaps
When true, git will use pack bitmaps (if available) when packing
to stdout (e.g., during the server side of a fetch). Defaults to
true. You should not generally need to turn this off unless you
are debugging pack bitmaps.
pack.writeBitmaps (deprecated)
This is a deprecated synonym for repack.writeBitmaps.
pack.writeBitmapHashCache
When true, git will include a "hash cache" section in the bitmap
index (if one is written). This cache can be used to feed git’s
delta heuristics, potentially leading to better deltas between
bitmapped and non-bitmapped objects (e.g., when serving a fetch
between an older, bitmapped pack and objects that have been
pushed since the last gc). The downside is that it consumes 4
bytes per object of disk space, and that JGit’s bitmap
implementation does not understand it, causing it to complain if
Git and JGit are used on the same repository. Defaults to false.
pager.<cmd>
If the value is boolean, turns on or off pagination of the output
of a particular Git subcommand when writing to a tty. Otherwise,
turns on pagination for the subcommand using the pager specified
by the value of pager.<cmd>. If --paginate or --no-pager is
specified on the command line, it takes precedence over this
option. To disable pagination for all commands, set core.pager or
GIT_PAGER to cat.
pretty.<name>
Alias for a --pretty= format string, as specified in git-log(1).
Any aliases defined here can be used just as the built-in pretty
formats could. For example, running git config pretty.changelog
"format:* %H %s" would cause the invocation git log
--pretty=changelog to be equivalent to running git log
"--pretty=format:* %H %s". Note that an alias with the same name
as a built-in format will be silently ignored.
protocol.allow
If set, provide a user defined default policy for all protocols
which don’t explicitly have a policy (protocol.<name>.allow). By
default, if unset, known-safe protocols (http, https, git, ssh,
file) have a default policy of always, known-dangerous protocols
(ext) have a default policy of never, and all other protocols
have a default policy of user. Supported policies:
· always - protocol is always able to be used.
· never - protocol is never able to be used.
· user - protocol is only able to be used when
GIT_PROTOCOL_FROM_USER is either unset or has a value of 1.
This policy should be used when you want a protocol to be
directly usable by the user but don’t want it used by
commands which execute clone/fetch/push commands without user
input, e.g. recursive submodule initialization.
protocol.<name>.allow
Set a policy to be used by protocol <name> with clone/fetch/push
commands. See protocol.allow above for the available policies.
The protocol names currently used by git are:
· file: any local file-based path (including file:// URLs, or
local paths)
· git: the anonymous git protocol over a direct TCP connection
(or proxy, if configured)
· ssh: git over ssh (including host:path syntax, ssh://, etc).
· http: git over http, both "smart http" and "dumb http". Note
that this does not include https; if you want to configure
both, you must do so individually.
· any external helpers are named by their protocol (e.g., use
hg to allow the git-remote-hg helper)
protocol.version
Experimental. If set, clients will attempt to communicate with a
server using the specified protocol version. If unset, no attempt
will be made by the client to communicate using a particular
protocol version, this results in protocol version 0 being used.
Supported versions:
· 0 - the original wire protocol.
· 1 - the original wire protocol with the addition of a version
string in the initial response from the server.
pull.ff
By default, Git does not create an extra merge commit when
merging a commit that is a descendant of the current commit.
Instead, the tip of the current branch is fast-forwarded. When
set to false, this variable tells Git to create an extra merge
commit in such a case (equivalent to giving the --no-ff option
from the command line). When set to only, only such fast-forward
merges are allowed (equivalent to giving the --ff-only option
from the command line). This setting overrides merge.ff when
pulling.
pull.rebase
When true, rebase branches on top of the fetched branch, instead
of merging the default branch from the default remote when "git
pull" is run. See "branch.<name>.rebase" for setting this on a
per-branch basis.
When preserve, also pass --preserve-merges along to git rebase so
that locally committed merge commits will not be flattened by
running git pull.
When the value is interactive, the rebase is run in interactive
mode.
NOTE: this is a possibly dangerous operation; do not use it
unless you understand the implications (see git-rebase(1) for
details).
pull.octopus
The default merge strategy to use when pulling multiple branches
at once.
pull.twohead
The default merge strategy to use when pulling a single branch.
push.default
Defines the action git push should take if no refspec is
explicitly given. Different values are well-suited for specific
workflows; for instance, in a purely central workflow (i.e. the
fetch source is equal to the push destination), upstream is
probably what you want. Possible values are:
· nothing - do not push anything (error out) unless a refspec
is explicitly given. This is primarily meant for people who
want to avoid mistakes by always being explicit.
· current - push the current branch to update a branch with the
same name on the receiving end. Works in both central and
non-central workflows.
· upstream - push the current branch back to the branch whose
changes are usually integrated into the current branch (which
is called @{upstream}). This mode only makes sense if you are
pushing to the same repository you would normally pull from
(i.e. central workflow).
· tracking - This is a deprecated synonym for upstream.
· simple - in centralized workflow, work like upstream with an
added safety to refuse to push if the upstream branch’s name
is different from the local one.
When pushing to a remote that is different from the remote
you normally pull from, work as current. This is the safest
option and is suited for beginners.
This mode has become the default in Git 2.0.
· matching - push all branches having the same name on both
ends. This makes the repository you are pushing to remember
the set of branches that will be pushed out (e.g. if you
always push maint and master there and no other branches, the
repository you push to will have these two branches, and your
local maint and master will be pushed there).
To use this mode effectively, you have to make sure all the
branches you would push out are ready to be pushed out before
running git push, as the whole point of this mode is to allow
you to push all of the branches in one go. If you usually
finish work on only one branch and push out the result, while
other branches are unfinished, this mode is not for you. Also
this mode is not suitable for pushing into a shared central
repository, as other people may add new branches there, or
update the tip of existing branches outside your control.
This used to be the default, but not since Git 2.0 (simple is
the new default).
push.followTags
If set to true enable --follow-tags option by default. You may
override this configuration at time of push by specifying
--no-follow-tags.
push.gpgSign
May be set to a boolean value, or the string if-asked. A true
value causes all pushes to be GPG signed, as if --signed is
passed to git-push(1). The string if-asked causes pushes to be
signed if the server supports it, as if --signed=if-asked is
passed to git push. A false value may override a value from a
lower-priority config file. An explicit command-line flag always
overrides this config option.
push.pushOption
When no --push-option=<option> argument is given from the command
line, git push behaves as if each <value> of this variable is
given as --push-option=<value>.
This is a multi-valued variable, and an empty value can be used
in a higher priority configuration file (e.g. .git/config in a
repository) to clear the values inherited from a lower priority
configuration files (e.g. $HOME/.gitconfig).
Example:
/etc/gitconfig push.pushoption = a push.pushoption = b
~/.gitconfig push.pushoption = c
repo/.git/config push.pushoption = push.pushoption = b
This will result in only b (a and c are cleared).
push.recurseSubmodules
Make sure all submodule commits used by the revisions to be
pushed are available on a remote-tracking branch. If the value is
check then Git will verify that all submodule commits that
changed in the revisions to be pushed are available on at least
one remote of the submodule. If any commits are missing, the push
will be aborted and exit with non-zero status. If the value is
on-demand then all submodules that changed in the revisions to be
pushed will be pushed. If on-demand was not able to push all
necessary revisions it will also be aborted and exit with
non-zero status. If the value is no then default behavior of
ignoring submodules when pushing is retained. You may override
this configuration at time of push by specifying
--recurse-submodules=check|on-demand|no.
rebase.stat
Whether to show a diffstat of what changed upstream since the
last rebase. False by default.
rebase.autoSquash
If set to true enable --autosquash option by default.
rebase.autoStash
When set to true, automatically create a temporary stash entry
before the operation begins, and apply it after the operation
ends. This means that you can run rebase on a dirty worktree.
However, use with care: the final stash application after a
successful rebase might result in non-trivial conflicts. This
option can be overridden by the --no-autostash and --autostash
options of git-rebase(1). Defaults to false.
rebase.missingCommitsCheck
If set to "warn", git rebase -i will print a warning if some
commits are removed (e.g. a line was deleted), however the rebase
will still proceed. If set to "error", it will print the previous
warning and stop the rebase, git rebase --edit-todo can then be
used to correct the error. If set to "ignore", no checking is
done. To drop a commit without warning or error, use the drop
command in the todo list. Defaults to "ignore".
rebase.instructionFormat
A format string, as specified in git-log(1), to be used for the
todo list during an interactive rebase. The format will
automatically have the long commit hash prepended to the format.
rebase.abbreviateCommands
If set to true, git rebase will use abbreviated command names in
the todo list resulting in something like this:
p deadbee The oneline of the commit
p fa1afe1 The oneline of the next commit
...
instead of:
pick deadbee The oneline of the commit
pick fa1afe1 The oneline of the next commit
...
Defaults to false.
receive.advertiseAtomic
By default, git-receive-pack will advertise the atomic push
capability to its clients. If you don’t want to advertise this
capability, set this variable to false.
receive.advertisePushOptions
When set to true, git-receive-pack will advertise the push
options capability to its clients. False by default.
receive.autogc
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop it
by setting this variable to false.
receive.certNonceSeed
By setting this variable to a string, git receive-pack will
accept a git push --signed and verifies it by using a "nonce"
protected by HMAC using this string as a secret key.
receive.certNonceSlop
When a git push --signed sent a push certificate with a "nonce"
that was issued by a receive-pack serving the same repository
within this many seconds, export the "nonce" found in the
certificate to GIT_PUSH_CERT_NONCE to the hooks (instead of what
the receive-pack asked the sending side to include). This may
allow writing checks in pre-receive and post-receive a bit
easier. Instead of checking GIT_PUSH_CERT_NONCE_SLOP environment
variable that records by how many seconds the nonce is stale to
decide if they want to accept the certificate, they only can
check GIT_PUSH_CERT_NONCE_STATUS is OK.
receive.fsckObjects
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
broken link. The result of an abort are only dangling objects.
Defaults to false. If not set, the value of transfer.fsckObjects
is used instead.
receive.fsck.<msg-id>
When receive.fsckObjects is set to true, errors can be switched
to warnings and vice versa by configuring the
receive.fsck.<msg-id> setting where the <msg-id> is the fsck
message ID and the value is one of error, warn or ignore. For
convenience, fsck prefixes the error/warning with the message ID,
e.g. "missingEmail: invalid author/committer line - missing
email" means that setting receive.fsck.missingEmail = ignore will
hide that issue.
This feature is intended to support working with legacy
repositories which would not pass pushing when
receive.fsckObjects = true, allowing the host to accept
repositories with certain known issues but still catch other
issues.
receive.fsck.skipList
The path to a sorted list of object names (i.e. one SHA-1 per
line) that are known to be broken in a non-fatal way and should
be ignored. This feature is useful when an established project
should be accepted despite early commits containing errors that
can be safely ignored such as invalid committer email addresses.
Note: corrupt objects cannot be skipped with this setting.
receive.keepAlive
After receiving the pack from the client, receive-pack may
produce no output (if --quiet was specified) while processing the
pack, causing some networks to drop the TCP connection. With this
option set, if receive-pack does not transmit any data in this
phase for receive.keepAlive seconds, it will send a short
keepalive packet. The default is 5 seconds; set to 0 to disable
keepalives entirely.
receive.unpackLimit
If the number of objects received in a push is below this limit
then the objects will be unpacked into loose object files.
However if the number of received objects equals or exceeds this
limit then the received pack will be stored as a pack, after
adding any missing delta bases. Storing the pack from a push can
make the push operation complete faster, especially on slow
filesystems. If not set, the value of transfer.unpackLimit is
used instead.
receive.maxInputSize
If the size of the incoming pack stream is larger than this
limit, then git-receive-pack will error out, instead of accepting
the pack file. If not set or set to 0, then the size is
unlimited.
receive.denyDeletes
If set to true, git-receive-pack will deny a ref update that
deletes the ref. Use this to prevent such a ref deletion via a
push.
receive.denyDeleteCurrent
If set to true, git-receive-pack will deny a ref update that
deletes the currently checked out branch of a non-bare
repository.
receive.denyCurrentBranch
If set to true or "refuse", git-receive-pack will deny a ref
update to the currently checked out branch of a non-bare
repository. Such a push is potentially dangerous because it
brings the HEAD out of sync with the index and working tree. If
set to "warn", print a warning of such a push to stderr, but
allow the push to proceed. If set to false or "ignore", allow
such pushes with no message. Defaults to "refuse".
Another option is "updateInstead" which will update the working
tree if pushing into the current branch. This option is intended
for synchronizing working directories when one side is not easily
accessible via interactive ssh (e.g. a live web site, hence the
requirement that the working directory be clean). This mode also
comes in handy when developing inside a VM to test and fix code
on different Operating Systems.
By default, "updateInstead" will refuse the push if the working
tree or the index have any difference from the HEAD, but the
push-to-checkout hook can be used to customize this. See
githooks(5).
receive.denyNonFastForwards
If set to true, git-receive-pack will deny a ref update which is
not a fast-forward. Use this to prevent such an update via a
push, even if that push is forced. This configuration variable is
set when initializing a shared repository.
receive.hideRefs
This variable is the same as transfer.hideRefs, but applies only
to receive-pack (and so affects pushes, but not fetches). An
attempt to update or delete a hidden ref by git push is rejected.
receive.updateServerInfo
If set to true, git-receive-pack will run git-update-server-info
after receiving data from git-push and updating refs.
receive.shallowUpdate
If set to true, .git/shallow can be updated when new refs require
new shallow roots. Otherwise those refs are rejected.
remote.pushDefault
The remote to push to by default. Overrides branch.<name>.remote
for all branches, and is overridden by branch.<name>.pushRemote
for specific branches.
remote.<name>.url
The URL of a remote repository. See git-fetch(1) or git-push(1).
remote.<name>.pushurl
The push URL of a remote repository. See git-push(1).
remote.<name>.proxy
For remotes that require curl (http, https and ftp), the URL to
the proxy to use for that remote. Set to the empty string to
disable proxying for that remote.
remote.<name>.proxyAuthMethod
For remotes that require curl (http, https and ftp), the method
to use for authenticating against the proxy in use (probably set
in remote.<name>.proxy). See http.proxyAuthMethod.
remote.<name>.fetch
The default set of "refspec" for git-fetch(1). See git-fetch(1).
remote.<name>.push
The default set of "refspec" for git-push(1). See git-push(1).
remote.<name>.mirror
If true, pushing to this remote will automatically behave as if
the --mirror option was given on the command line.
remote.<name>.skipDefaultUpdate
If true, this remote will be skipped by default when updating
using git-fetch(1) or the update subcommand of git-remote(1).
remote.<name>.skipFetchAll
If true, this remote will be skipped by default when updating
using git-fetch(1) or the update subcommand of git-remote(1).
remote.<name>.receivepack
The default program to execute on the remote side when pushing.
See option --receive-pack of git-push(1).
remote.<name>.uploadpack
The default program to execute on the remote side when fetching.
See option --upload-pack of git-fetch-pack(1).
remote.<name>.tagOpt
Setting this value to --no-tags disables automatic tag following
when fetching from remote <name>. Setting it to --tags will fetch
every tag from remote <name>, even if they are not reachable from
remote branch heads. Passing these flags directly to git-fetch(1)
can override this setting. See options --tags and --no-tags of
git-fetch(1).
remote.<name>.vcs
Setting this to a value <vcs> will cause Git to interact with the
remote with the git-remote-<vcs> helper.
remote.<name>.prune
When set to true, fetching from this remote by default will also
remove any remote-tracking references that no longer exist on the
remote (as if the --prune option was given on the command line).
Overrides fetch.prune settings, if any.
remotes.<group>
The list of remotes which are fetched by "git remote update
<group>". See git-remote(1).
repack.useDeltaBaseOffset
By default, git-repack(1) creates packs that use delta-base
offset. If you need to share your repository with Git older than
version 1.4.4, either directly or via a dumb protocol such as
http, then you need to set this option to "false" and repack.
Access from old Git versions over the native protocol are
unaffected by this option.
repack.packKeptObjects
If set to true, makes git repack act as if --pack-kept-objects
was passed. See git-repack(1) for details. Defaults to false
normally, but true if a bitmap index is being written (either via
--write-bitmap-index or repack.writeBitmaps).
repack.writeBitmaps
When true, git will write a bitmap index when packing all objects
to disk (e.g., when git repack -a is run). This index can speed
up the "counting objects" phase of subsequent packs created for
clones and fetches, at the cost of some disk space and extra time
spent on the initial repack. This has no effect if multiple
packfiles are created. Defaults to false.
rerere.autoUpdate
When set to true, git-rerere updates the index with the resulting
contents after it cleanly resolves conflicts using previously
recorded resolution. Defaults to false.
rerere.enabled
Activate recording of resolved conflicts, so that identical
conflict hunks can be resolved automatically, should they be
encountered again. By default, git-rerere(1) is enabled if there
is an rr-cache directory under the $GIT_DIR, e.g. if "rerere" was
previously used in the repository.
sendemail.identity
A configuration identity. When given, causes values in the
sendemail.<identity> subsection to take precedence over values in
the sendemail section. The default identity is the value of
sendemail.identity.
sendemail.smtpEncryption
See git-send-email(1) for description. Note that this setting is
not subject to the identity mechanism.
sendemail.smtpssl (deprecated)
Deprecated alias for sendemail.smtpEncryption = ssl.
sendemail.smtpsslcertpath
Path to ca-certificates (either a directory or a single file).
Set it to an empty string to disable certificate verification.
sendemail.<identity>.*
Identity-specific versions of the sendemail.* parameters found
below, taking precedence over those when this identity is
selected, through either the command-line or sendemail.identity.
sendemail.aliasesFile, sendemail.aliasFileType, sendemail.annotate,
sendemail.bcc, sendemail.cc, sendemail.ccCmd, sendemail.chainReplyTo,
sendemail.confirm, sendemail.envelopeSender, sendemail.from,
sendemail.multiEdit, sendemail.signedoffbycc, sendemail.smtpPass,
sendemail.suppresscc, sendemail.suppressFrom, sendemail.to,
sendemail.tocmd, sendemail.smtpDomain, sendemail.smtpServer,
sendemail.smtpServerPort, sendemail.smtpServerOption,
sendemail.smtpUser, sendemail.thread, sendemail.transferEncoding,
sendemail.validate, sendemail.xmailer
See git-send-email(1) for description.
sendemail.signedoffcc (deprecated)
Deprecated alias for sendemail.signedoffbycc.
sendemail.smtpBatchSize
Number of messages to be sent per connection, after that a
relogin will happen. If the value is 0 or undefined, send all
messages in one connection. See also the --batch-size option of
git-send-email(1).
sendemail.smtpReloginDelay
Seconds wait before reconnecting to smtp server. See also the
--relogin-delay option of git-send-email(1).
showbranch.default
The default set of branches for git-show-branch(1). See
git-show-branch(1).
splitIndex.maxPercentChange
When the split index feature is used, this specifies the percent
of entries the split index can contain compared to the total
number of entries in both the split index and the shared index
before a new shared index is written. The value should be between
0 and 100. If the value is 0 then a new shared index is always
written, if it is 100 a new shared index is never written. By
default the value is 20, so a new shared index is written if the
number of entries in the split index would be greater than 20
percent of the total number of entries. See git-update-index(1).
splitIndex.sharedIndexExpire
When the split index feature is used, shared index files that
were not modified since the time this variable specifies will be
removed when a new shared index file is created. The value "now"
expires all entries immediately, and "never" suppresses
expiration altogether. The default value is "2.weeks.ago". Note
that a shared index file is considered modified (for the purpose
of expiration) each time a new split-index file is either created
based on it or read from it. See git-update-index(1).
status.relativePaths
By default, git-status(1) shows paths relative to the current
directory. Setting this variable to false shows paths relative to
the repository root (this was the default for Git prior to
v1.5.4).
status.short
Set to true to enable --short by default in git-status(1). The
option --no-short takes precedence over this variable.
status.branch
Set to true to enable --branch by default in git-status(1). The
option --no-branch takes precedence over this variable.
status.displayCommentPrefix
If set to true, git-status(1) will insert a comment prefix before
each output line (starting with core.commentChar, i.e. # by
default). This was the behavior of git-status(1) in Git 1.8.4 and
previous. Defaults to false.
status.showStash
If set to true, git-status(1) will display the number of entries
currently stashed away. Defaults to false.
status.showUntrackedFiles
By default, git-status(1) and git-commit(1) show files which are
not currently tracked by Git. Directories which contain only
untracked files, are shown with the directory name only. Showing
untracked files means that Git needs to lstat() all the files in
the whole repository, which might be slow on some systems. So,
this variable controls how the commands displays the untracked
files. Possible values are:
· no - Show no untracked files.
· normal - Show untracked files and directories.
· all - Show also individual files in untracked directories.
If this variable is not specified, it defaults to normal. This
variable can be overridden with the -u|--untracked-files option
of git-status(1) and git-commit(1).
status.submoduleSummary
Defaults to false. If this is set to a non zero number or true
(identical to -1 or an unlimited number), the submodule summary
will be enabled and a summary of commits for modified submodules
will be shown (see --summary-limit option of git-submodule(1)).
Please note that the summary output command will be suppressed
for all submodules when diff.ignoreSubmodules is set to all or
only for those submodules where submodule.<name>.ignore=all. The
only exception to that rule is that status and commit will show
staged submodule changes. To also view the summary for ignored
submodules you can either use the --ignore-submodules=dirty
command-line option or the git submodule summary command, which
shows a similar output but does not honor these settings.
stash.showPatch
If this is set to true, the git stash show command without an
option will show the stash entry in patch form. Defaults to
false. See description of show command in git-stash(1).
stash.showStat
If this is set to true, the git stash show command without an
option will show diffstat of the stash entry. Defaults to true.
See description of show command in git-stash(1).
submodule.<name>.url
The URL for a submodule. This variable is copied from the
.gitmodules file to the git config via git submodule init. The
user can change the configured URL before obtaining the submodule
via git submodule update. If neither submodule.<name>.active or
submodule.active are set, the presence of this variable is used
as a fallback to indicate whether the submodule is of interest to
git commands. See git-submodule(1) and gitmodules(5) for details.
submodule.<name>.update
The method by which a submodule is updated by git submodule
update, which is the only affected command, others such as git
checkout --recurse-submodules are unaffected. It exists for
historical reasons, when git submodule was the only command to
interact with submodules; settings like submodule.active and
pull.rebase are more specific. It is populated by git submodule
init from the gitmodules(5) file. See description of update
command in git-submodule(1).
submodule.<name>.branch
The remote branch name for a submodule, used by git submodule
update --remote. Set this option to override the value found in
the .gitmodules file. See git-submodule(1) and gitmodules(5) for
details.
submodule.<name>.fetchRecurseSubmodules
This option can be used to control recursive fetching of this
submodule. It can be overridden by using the
--[no-]recurse-submodules command-line option to "git fetch" and
"git pull". This setting will override that from in the
gitmodules(5) file.
submodule.<name>.ignore
Defines under what circumstances "git status" and the diff family
show a submodule as modified. When set to "all", it will never be
considered modified (but it will nonetheless show up in the
output of status and commit when it has been staged), "dirty"
will ignore all changes to the submodules work tree and takes
only differences between the HEAD of the submodule and the commit
recorded in the superproject into account. "untracked" will
additionally let submodules with modified tracked files in their
work tree show up. Using "none" (the default when this option is
not set) also shows submodules that have untracked files in their
work tree as changed. This setting overrides any setting made in
.gitmodules for this submodule, both settings can be overridden
on the command line by using the "--ignore-submodules" option.
The git submodule commands are not affected by this setting.
submodule.<name>.active
Boolean value indicating if the submodule is of interest to git
commands. This config option takes precedence over the
submodule.active config option.
submodule.active
A repeated field which contains a pathspec used to match against
a submodule’s path to determine if the submodule is of interest
to git commands.
submodule.recurse
Specifies if commands recurse into submodules by default. This
applies to all commands that have a --recurse-submodules option.
Defaults to false.
submodule.fetchJobs
Specifies how many submodules are fetched/cloned at the same
time. A positive integer allows up to that number of submodules
fetched in parallel. A value of 0 will give some reasonable
default. If unset, it defaults to 1.
submodule.alternateLocation
Specifies how the submodules obtain alternates when submodules
are cloned. Possible values are no, superproject. By default no
is assumed, which doesn’t add references. When the value is set
to superproject the submodule to be cloned computes its
alternates location relative to the superprojects alternate.
submodule.alternateErrorStrategy
Specifies how to treat errors with the alternates for a submodule
as computed via submodule.alternateLocation. Possible values are
ignore, info, die. Default is die.
tag.forceSignAnnotated
A boolean to specify whether annotated tags created should be GPG
signed. If --annotate is specified on the command line, it takes
precedence over this option.
tag.sort
This variable controls the sort ordering of tags when displayed
by git-tag(1). Without the "--sort=<value>" option provided, the
value of this variable will be used as the default.
tar.umask
This variable can be used to restrict the permission bits of tar
archive entries. The default is 0002, which turns off the world
write bit. The special value "user" indicates that the archiving
user’s umask will be used instead. See umask(2) and
git-archive(1).
transfer.fsckObjects
When fetch.fsckObjects or receive.fsckObjects are not set, the
value of this variable is used instead. Defaults to false.
transfer.hideRefs
String(s) receive-pack and upload-pack use to decide which refs
to omit from their initial advertisements. Use more than one
definition to specify multiple prefix strings. A ref that is
under the hierarchies listed in the value of this variable is
excluded, and is hidden when responding to git push or git fetch.
See receive.hideRefs and uploadpack.hideRefs for program-specific
versions of this config.
You may also include a ! in front of the ref name to negate the
entry, explicitly exposing it, even if an earlier entry marked it
as hidden. If you have multiple hideRefs values, later entries
override earlier ones (and entries in more-specific config files
override less-specific ones).
If a namespace is in use, the namespace prefix is stripped from
each reference before it is matched against transfer.hiderefs
patterns. For example, if refs/heads/master is specified in
transfer.hideRefs and the current namespace is foo, then
refs/namespaces/foo/refs/heads/master is omitted from the
advertisements but refs/heads/master and
refs/namespaces/bar/refs/heads/master are still advertised as
so-called "have" lines. In order to match refs before stripping,
add a ^ in front of the ref name. If you combine ! and ^, !
must be specified first.
Even if you hide refs, a client may still be able to steal the
target objects via the techniques described in the "SECURITY"
section of the gitnamespaces(7) man page; it’s best to keep
private data in a separate repository.
transfer.unpackLimit
When fetch.unpackLimit or receive.unpackLimit are not set, the
value of this variable is used instead. The default value is 100.
uploadarchive.allowUnreachable
If true, allow clients to use git archive --remote to request any
tree, whether reachable from the ref tips or not. See the
discussion in the "SECURITY" section of git-upload-archive(1) for
more details. Defaults to false.
uploadpack.hideRefs
This variable is the same as transfer.hideRefs, but applies only
to upload-pack (and so affects only fetches, not pushes). An
attempt to fetch a hidden ref by git fetch will fail. See also
uploadpack.allowTipSHA1InWant.
uploadpack.allowTipSHA1InWant
When uploadpack.hideRefs is in effect, allow upload-pack to
accept a fetch request that asks for an object at the tip of a
hidden ref (by default, such a request is rejected). See also
uploadpack.hideRefs. Even if this is false, a client may be able
to steal objects via the techniques described in the "SECURITY"
section of the gitnamespaces(7) man page; it’s best to keep
private data in a separate repository.
uploadpack.allowReachableSHA1InWant
Allow upload-pack to accept a fetch request that asks for an
object that is reachable from any ref tip. However, note that
calculating object reachability is computationally expensive.
Defaults to false. Even if this is false, a client may be able to
steal objects via the techniques described in the "SECURITY"
section of the gitnamespaces(7) man page; it’s best to keep
private data in a separate repository.
uploadpack.allowAnySHA1InWant
Allow upload-pack to accept a fetch request that asks for any
object at all. Defaults to false.
uploadpack.keepAlive
When upload-pack has started pack-objects, there may be a quiet
period while pack-objects prepares the pack. Normally it would
output progress information, but if --quiet was used for the
fetch, pack-objects will output nothing at all until the pack
data begins. Some clients and networks may consider the server to
be hung and give up. Setting this option instructs upload-pack to
send an empty keepalive packet every uploadpack.keepAlive
seconds. Setting this option to 0 disables keepalive packets
entirely. The default is 5 seconds.
uploadpack.packObjectsHook
If this option is set, when upload-pack would run git
pack-objects to create a packfile for a client, it will run this
shell command instead. The pack-objects command and arguments it
would have run (including the git pack-objects at the beginning)
are appended to the shell command. The stdin and stdout of the
hook are treated as if pack-objects itself was run. I.e.,
upload-pack will feed input intended for pack-objects to the
hook, and expects a completed packfile on stdout.
Note that this configuration variable is ignored if it is seen in
the repository-level config (this is a safety measure against
fetching from untrusted repositories).
url.<base>.insteadOf
Any URL that starts with this value will be rewritten to start,
instead, with <base>. In cases where some site serves a large
number of repositories, and serves them with multiple access
methods, and some users need to use different access methods,
this feature allows people to specify any of the equivalent URLs
and have Git automatically rewrite the URL to the best
alternative for the particular user, even for a never-before-seen
repository on the site. When more than one insteadOf strings
match a given URL, the longest match is used.
Note that any protocol restrictions will be applied to the
rewritten URL. If the rewrite changes the URL to use a custom
protocol or remote helper, you may need to adjust the
protocol.*.allow config to permit the request. In particular,
protocols you expect to use for submodules must be set to always
rather than the default of user. See the description of
protocol.allow above.
url.<base>.pushInsteadOf
Any URL that starts with this value will not be pushed to;
instead, it will be rewritten to start with <base>, and the
resulting URL will be pushed to. In cases where some site serves
a large number of repositories, and serves them with multiple
access methods, some of which do not allow push, this feature
allows people to specify a pull-only URL and have Git
automatically use an appropriate URL to push, even for a
never-before-seen repository on the site. When more than one
pushInsteadOf strings match a given URL, the longest match is
used. If a remote has an explicit pushurl, Git will ignore this
setting for that remote.
user.email
Your email address to be recorded in any newly created commits.
Can be overridden by the GIT_AUTHOR_EMAIL, GIT_COMMITTER_EMAIL,
and EMAIL environment variables. See git-commit-tree(1).
user.name
Your full name to be recorded in any newly created commits. Can
be overridden by the GIT_AUTHOR_NAME and GIT_COMMITTER_NAME
environment variables. See git-commit-tree(1).
user.useConfigOnly
Instruct Git to avoid trying to guess defaults for user.email and
user.name, and instead retrieve the values only from the
configuration. For example, if you have multiple email addresses
and would like to use a different one for each repository, then
with this configuration option set to true in the global config
along with a name, Git will prompt you to set up an email before
making new commits in a newly cloned repository. Defaults to
false.
user.signingKey
If git-tag(1) or git-commit(1) is not selecting the key you want
it to automatically when creating a signed tag or commit, you can
override the default selection with this variable. This option is
passed unchanged to gpg’s --local-user parameter, so you may
specify a key using any method that gpg supports.
versionsort.prereleaseSuffix (deprecated)
Deprecated alias for versionsort.suffix. Ignored if
versionsort.suffix is set.
versionsort.suffix
Even when version sort is used in git-tag(1), tagnames with the
same base version but different suffixes are still sorted
lexicographically, resulting e.g. in prerelease tags appearing
after the main release (e.g. "1.0-rc1" after "1.0"). This
variable can be specified to determine the sorting order of tags
with different suffixes.
By specifying a single suffix in this variable, any tagname
containing that suffix will appear before the corresponding main
release. E.g. if the variable is set to "-rc", then all "1.0-rcX"
tags will appear before "1.0". If specified multiple times, once
per suffix, then the order of suffixes in the configuration will
determine the sorting order of tagnames with those suffixes. E.g.
if "-pre" appears before "-rc" in the configuration, then all
"1.0-preX" tags will be listed before any "1.0-rcX" tags. The
placement of the main release tag relative to tags with various
suffixes can be determined by specifying the empty suffix among
those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and
"-bfs" appear in the configuration in this order, then all
"v4.8-rcX" tags are listed first, followed by "v4.8", then
"v4.8-ckX" and finally "v4.8-bfsX".
If more than one suffixes match the same tagname, then that
tagname will be sorted according to the suffix which starts at
the earliest position in the tagname. If more than one different
matching suffixes start at that earliest position, then that
tagname will be sorted according to the longest of those
suffixes. The sorting order between different suffixes is
undefined if they are in multiple config files.
web.browser
Specify a web browser that may be used by some commands.
Currently only git-instaweb(1) and git-help(1) may use it.
worktree.guessRemote
With add, if no branch argument, and neither of -b nor -B nor
--detach are given, the command defaults to creating a new branch
from HEAD. If worktree.guessRemote is set to true, worktree add
tries to find a remote-tracking branch whose name uniquely
matches the new branch name. If such a branch exists, it is
checked out and set as "upstream" for the new branch. If no such
match can be found, it falls back to creating a new branch from
the current HEAD.
Part of the git(1) suite
This page is part of the git (Git distributed version control system)
project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual page,
see ⟨http://git-scm.com/community⟩. This page was obtained from the
project's upstream Git repository ⟨https://github.com/git/git.git⟩ on
2018-02-02. (At that time, the date of the most recent commit that
was found in the repository was 2018-01-23.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.16.1.2.g59c276cf 01/23/2018 GIT-CONFIG(1)
Pages that refer to this page: git(1), git-am(1), git-apply(1), git-branch(1), git-check-ignore(1), git-clone(1), git-commit(1), git-commit-tree(1), git-diff(1), git-diff-files(1), git-diff-index(1), git-difftool(1), git-diff-tree(1), git-fast-import(1), git-fetch(1), git-for-each-ref(1), git-format-patch(1), git-grep(1), git-help(1), git-interpret-trailers(1), git-log(1), git-ls-files(1), git-ls-remote(1), git-ls-tree(1), git-mergetool(1), git-pull(1), git-push(1), git-rebase(1), git-receive-pack(1), git-remote(1), git-rev-list(1), git-rev-parse(1), git-show(1), git-status(1), git-tag(1), git-update-index(1), git-var(1), gitweb(1), git-web--browse(1), git-worktree(1), gitattributes(5), githooks(5), gitmodules(5), gitcvs-migration(7), gittutorial(7)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|