|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | NOTES | ENVIRONMENT | SEE ALSO | FILES | HISTORY | AVAILABILITY | COLOPHON |
|
SWAPON(8) System Administration SWAPON(8)
swapon, swapoff - enable/disable devices and files for paging and
swapping
swapon [options] [specialfile...]
swapoff [-va] [specialfile...]
swapon is used to specify devices on which paging and swapping are to
take place.
The device or file used is given by the specialfile parameter. It
may be of the form -L label or -U uuid to indicate a device by label
or uuid.
Calls to swapon normally occur in the system boot scripts making all
swap devices available, so that the paging and swapping activity is
interleaved across several devices and files.
swapoff disables swapping on the specified devices and files. When
the -a flag is given, swapping is disabled on all known swap devices
and files (as found in /proc/swaps or /etc/fstab).
-a, --all
All devices marked as ``swap'' in /etc/fstab are made
available, except for those with the ``noauto'' option.
Devices that are already being used as swap are silently
skipped.
-d, --discard[=policy]
Enable swap discards, if the swap backing device supports the
discard or trim operation. This may improve performance on
some Solid State Devices, but often it does not. The option
allows one to select between two available swap discard
policies: --discard=once to perform a single-time discard
operation for the whole swap area at swapon; or
--discard=pages to asynchronously discard freed swap pages
before they are available for reuse. If no policy is
selected, the default behavior is to enable both discard
types. The /etc/fstab mount options discard, discard=once, or
discard=pages may also be used to enable discard flags.
-e, --ifexists
Silently skip devices that do not exist. The /etc/fstab mount
option nofail may also be used to skip non-existing device.
-f, --fixpgsz
Reinitialize (exec mkswap) the swap space if its page size
does not match that of the current running kernel. mkswap(2)
initializes the whole device and does not check for bad
blocks.
-h, --help
Display help text and exit.
-L label
Use the partition that has the specified label. (For this,
access to /proc/partitions is needed.)
-o, --options opts
Specify swap options by an fstab-compatible comma-separated
string. For example:
swapon -o pri=1,discard=pages,nofail /dev/sda2
The opts string is evaluated last and overrides all other
command line options.
-p, --priority priority
Specify the priority of the swap device. priority is a value
between -1 and 32767. Higher numbers indicate higher
priority. See swapon(2) for a full description of swap
priorities. Add pri=value to the option field of /etc/fstab
for use with swapon -a. When no priority is defined, it
defaults to -1.
-s, --summary
Display swap usage summary by device. Equivalent to "cat
/proc/swaps". This output format is DEPRECATED in favour of
--show that provides better control on output data.
--show[=column...]
Display a definable table of swap areas. See the --help
output for a list of available columns.
--noheadings
Do not print headings when displaying --show output.
--raw Display --show output without aligning table columns.
--bytes
Display swap size in bytes in --show output instead of in
user-friendly units.
-U uuid
Use the partition that has the specified uuid.
-v, --verbose
Be verbose.
-V, --version
Display version information and exit.
You should not use swapon on a file with holes. This can be seen in
the system log as
swapon: swapfile has holes.
The swap file implementation in the kernel expects to be able to
write to the file directly, without the assistance of the filesystem.
This is a problem on preallocated files (e.g. fallocate(1)) on
filesystems like XFS or ext4, and on copy-on-write filesystems like
btrfs.
It is recommended to use dd(1) and /dev/zero to avoid holes on XFS
and ext4.
swapon may not work correctly when using a swap file with some
versions of btrfs. This is due to btrfs being a copy-on-write
filesystem: the file location may not be static and corruption can
result. Btrfs actively disallows the use of swap files on its
filesystems by refusing to map the file.
One possible workaround is to map the swap file to a loopback device.
This will allow the filesystem to determine the mapping properly but
may come with a performance impact.
Swap over NFS may not work.
swapon automatically detects and rewrites a swap space signature with
old software suspend data (e.g S1SUSPEND, S2SUSPEND, ...). The
problem is that if we don't do it, then we get data corruption the
next time an attempt at unsuspending is made.
LIBMOUNT_DEBUG=all
enables libmount debug output.
LIBBLKID_DEBUG=all
enables libblkid debug output.
swapoff(2), swapon(2), fstab(5), init(8), mkswap(8), mount(8), rc(8)
/dev/sd?? standard paging devices
/etc/fstab ascii filesystem description table
The swapon command appeared in 4.0BSD.
The swapon command is part of the util-linux package and is available
from https://www.kernel.org/pub/linux/utils/util-linux/.
This page is part of the util-linux (a random collection of Linux
utilities) project. Information about the project can be found at
⟨https://www.kernel.org/pub/linux/utils/util-linux/⟩. If you have a
bug report for this manual page, send it to
util-linux@vger.kernel.org. This page was obtained from the
project's upstream Git repository
⟨git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git⟩ on
2018-02-02. (At that time, the date of the most recent commit that
was found in the repository was 2018-02-01.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
util-linux October 2014 SWAPON(8)
Pages that refer to this page: swapon(2), fstab(5), proc(5), systemd.swap(5), mkswap(8), mount(8), swaplabel(8)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|