STAP-SERVER(8) System Manager's Manual STAP-SERVER(8)
stap-server - systemtap compile server management
[ service ] stap-server { start | stop | restart | condrestart |
try-restart | force-reload | status } [ options ]
A systemtap compile server listens for connections from stap clients
on a secure SSL network port and accepts requests to run the stap
front end. Each server advertises its presence and configuration on
the local network using mDNS (avahi) allowing for automatic detection
by clients.
The stap-server script aims to provide:
· management of systemtap compile servers as a service.
· convenient control over configured servers and individual
(ad-hoc) servers.
One of the actions below must be specified:
start Start servers. The specified servers are started. If no
server is specified, the configured servers are started. If no
servers are configured, a server for the kernel release and
architecture of the host is started. If a specified server is
already started, this action will be ignored for that server.
If a server fails to start, this action fails.
stop Stop server(s). The specified servers are stopped. If no
server is specified, all currently running servers are
stopped. If a specified server is not running, this action
will be successful for that server. If a server fails to stop,
this action fails.
restart
Stop and restart servers. The specified servers are stopped
and restarted. If no server is specified, all currently
running servers are stopped and restarted. If no servers are
running, this action behaves like start.
condrestart
Stop and restart servers. The specified servers are stopped
and restarted. If a specified server is not running, it is
not started. If no server is specified, all currently running
servers are stopped and restarted. If no servers are running,
none will be started.
try-restart
This action is identical to condrestart.
force-reload
Stop all running servers, reload config files and restart the
service as if start was specified.
status Print information about running servers. Information about the
specified server(s) will be printed. If no server is
specified, information about all running servers will be
printed.
The following options are used to provide additional configuration
and to specify servers to be managed:
-c configfile
This option specifies a global configuration file in addition
to the default global configuration file described below. This
file will be processed after the default global configuration
file. If the -c option is specified more than once, the last
configuration file specified will be used.
-a architecture
This option specifies the target architecture of the server
and is analogous to the -a option of stap. See the stap(1)
manual page for more details. The default architecture is the
architecture of the host.
-r kernel-release
This option specifies a target kernel release of the server
and is analogous to the -r option of stap. See the stap(1)
manual page for more details. The default release is that of
the currently running kernel. A server can handle multiple
releases by specifying multiple -r flags.
-I path
This option specifies an additional path to be searched by the
server(s) for tapsets and is analogous to the -I option of
stap. See the stap(1) manual page for more details.
-R path
This option specifies the location of the systemtap runtime to
be used by the server(s) and is analogous to the -R option of
stap. See the stap(1) manual page for more details.
-B options
This option specifies options to be passed to make when
building systemtap modules and is analogous to the -B option
of stap. See the stap(1) manual page for more details.
-i This option is a shortcut which specifies a server that
handles every release installed in /lib/modules/.
-n nickname
This option allows the specification of a server configuration
by nickname. When -n is specified, a currently running server
with the given nickname will be searched for. If no currently
running server with the given nickname is found, a server
configuration with the given nickname will be searched for in
the configuration files for default servers, or the path
configured in the global configuration file or the
configuration file specified by the -c option. If a server
configuration for the given nickname is found, the -a, -r, -I,
-R, -B and -u options for that server will be used as if they
were specified on the command line. If no configuration with
the given nickname is found, and the action is start (or an
action behaving like start (see ARGUMENTS), the server will be
started with the given nickname. If no configuration with the
given nickname is found, and the action is not start (or an
action behaving like start), it is an error. If a nickname is
not specified for a server which is being started, its
nickname will be its process id.
-p pid This option allows the specification of a server configuration
by process id. When -p is specified, a currently running
server with the given process id will be searched for. If no
such server is found, it is an error. If a server with the
given process id is found, the -a, -r, -I, -R, -B and -u
options for that server will be used as if they were specified
on the command line.
-u user-name
Each systemtap compile server is normally run by the user name
stap-server (for the initscript) or as the user invoking
stap-server, unless otherwise configured (see FILES). This
option specifies the user name used to run the server(s). The
user name specified must be a member of the group stap-server.
--log logfile
This option allows the specification of a separate log file
for each server. Each --log option is added to a list which
will be applied, in turn, to each server specified. If more
servers are specified than --log options, the default log file
(see FILES) will be used for subsequent servers.
--port port-number
This option allows the specification of a specific network
port for each server. Each --port option is added to a list
which will be applied, in turn, to each server specified. If
more servers are specified than --port options, a randomly
selected port is used for subsequent servers.
--ssl certificate-db-path
This option allows the specification of a separate NSS
certificate database for each server. Each --ssl option is
added to a list which will be applied, in turn, to each server
specified. If more servers are specified than --ssl options,
the default certificate database (see FILES) for subsequent
servers.
--max-threads threads
This option allows the specification of the maximum number of
worker threads to handle concurrent requests. If threads == 0,
each request will be handled on the main thread, serially.
The default is the number of available processor cores.
--max-request-size size
This options allows the specification of the maximum size of
an uncompressed client request. The arguement size is
specified in bytes. The default is the 50000 bytes.
--max-compressed-request size
This options allows the specification of the maximum size of a
compressed client request. The arguement size is specified in
bytes. The default is the 5000 bytes.
Configuration files allow us to:
· specify global configuration of logging, server configuration
files, status files and other global parameters.
· specify which servers are to be started by default.
The Global Configuration file contains variable assignments used to
configure the overall operation of the service. Each line beginning
with a '#' character is ignored. All other lines must be of the form
VARIABLE=VALUE. This is not a shell script. The entire contents of
the line after the = will be assigned as-is to the variable.
The following variables may be assigned:
CONFIG_PATH
Specifies the absolute path of the directory containing the
default server configurations.
STAT_PATH
Specifies the absolute path of the running server status
directory.
LOG_FILE
Specifies the absolute path of the log file.
STAP_USER
Specifies the userid which will be used to run the server(s)
(default: for the initscript stap-server, otherwise the user
running stap-server).
Here is an example of a Global Configuration file:
CONFIG_PATH=~<user>/my-stap-server-configs
LOG_FILE=/tmp/stap-server/log
Each server configuration file configures a server to be started when
no server is specified for the start action, or an action behaving
like the start action (see ARGUMENTS). Each configuration file
contains variable assignments used to configure an individual server.
Each line beginning with a '#' character is ignored. All other lines
must be of the form VARIABLE=VALUE. This is not a shell script. The
entire contents of the line after the = will be assigned as-is to the
variable.
Each configuration file must have a filename suffix of .conf. See
stappaths(7) for the default location of these files. This default
location can be overridden in the global configuration file using the
-c option (see OPTIONS).
The following variables may be assigned:
ARCH Specifies the target architecture for this server and
corresponds to the -a option (see OPTIONS). If ARCH is not
set, the architecture of the host will be used.
RELEASE
Specifies a kernel release for this server and corresponds to
the -r option (see OPTIONS). If RELEASE is not set, the
release of the kernel running on the host will be used.
BUILD Specifies options to be passed to the make process used by
systemtap to build kernel modules. This an array variable
with each element corresponding to a -B option (see OPTIONS).
Using the form BUILD=STRING clears the array and sets the
first element to STRING. Using the form BUILD+=STRING adds
STRING as an additional element to the array.
INCLUDE
Specifies a list of directories to be searched by the server
for tapsets. This is an array variable with each element
corresponding to a -I option (see OPTIONS). Using the form
INCLUDE=PATH clears the array and sets the first element to
PATH. Using the form INCLUDE+=PATH adds PATH as an additional
element to the array.
RUNTIME
Specifies the directory which contains the systemtap runtime
code to be used by this server and corresponds to the -R
option (see OPTIONS).
USER Specifies the user name to be used to run this server and
corresponds to the -u option (see OPTIONS).
NICKNAME
Specifies the nickname to be used to refer to this server and
corresponds to the -n option (see OPTIONS).
LOG Specifies the location of the log file to be used by this
server and corresponds to the --log option (see OPTIONS).
PORT Specifies the network port to be used by this server and
corresponds to the --port option (see OPTIONS).
SSL Specifies the location of the NSS certificate database to be
used by this server and corresponds to the --ssl option (see
OPTIONS).
MAXTHREADS
Specifies the maximum number of worker threads to handle
concurrent requests to be used by this server and corresponds
to the --max-threads option (see OPTIONS).
MAXREQSIZE
Specifies the maximum size of an uncompressed client request,
to be used by this server and correspnds to the
--max-request-size option (see OPTIONS).
MAXCOMPRESSEDREQ
Specifies the maximum size of an compressed client request, to
be used by this server and correspnds to the
--max-compressed-request option (see OPTIONS).
Here is an example of a server configuration file:
ARCH=
USER=
RELEASE=
NICKNAME=native
By keeping the ARCH, USER, and RELEASE fields blank, they will de‐
fault to the current arch and release and use the default user.
A more specific example:
ARCH=i386
RELEASE=2.6.18-128.el5
PORT=5001
LOG=/path/to/log/file
And here is a more complicated example:
USER=serveruser
RELEASE=/kernels/2.6.18-92.1.18.el5/build
INCLUDE=/mytapsets
INCLUDE+=/yourtapsets
BUILD='VARIABLE1=VALUE1 VARIABLE2=VALUE2'
DEFINE=STP_MAXMEMORY=1024
DEFINE+=DEBUG_TRANS
RUNTIME=/myruntime
NICKNAME=my-server
SSL=/path/to/NSS/certificate/database
The security of the SSL network connection between the client and
server depends on the proper management of server certificates.
The trustworthiness of a given systemtap compile server can not be
determined automatically without a trusted certificate authority
issuing systemtap compile server certificates. This is not practical
in everyday use and so, clients must authenticate servers against
their own database of trusted server certificates. In this context,
establishing a given server as trusted by a given client means adding
that server's certificate to the client's database of trusted
servers.
For the stap-server initscript, on the local host, this is handled
automatically. When the systemtap-server package is installed, the
server's certificate for the default user (stap-server) is
automatically generated and installed. This means that servers
started by the stap-server initscript, with the default user, are
automatically trusted by clients on the local host, both as an SSL
peer and as a systemtap module signer.
Furthermore, when stap is invoked by an unprivileged user (not root,
not a member of the group stapdev, but a member of the group stapusr
and possibly the group stapsys), the options --use-server and
--privilege are automatically added to the specified options. This
means that unprivileged users on the local host can use a server on
the local host in unprivileged mode with no further setup or options
required. Normal users (those in none of the SystemTap groups) can
also use compile-servers through the --use-server and --privilege
options. But they will of course be unable to load the module (the
-p4 option can be used to stop short of loading).
In order to use a server running on another host, that server's
certificate must be installed on the client's host. See the
--trust-servers option in the stap(1) manual page for more details
and README.unprivileged in the systemtap sources for more details.
See the stapex(3stap) manual page for a collection of sample
systemtap scripts.
To start the configured servers, or the default server, if none are
configured:
$ [ service ] stap-server start
To start a server that handles all kernel versions installed in
/lib/modules:
$ [ service ] stap-server start -i
To obtain information about the running server(s):
$ [ service ] stap-server status
To start a server like another one, except targeting a different
architecture, by referencing the first server's nickname:
$ [ service ] stap-server start -n NICKNAME -a ARCH
To start a server for a kernel release not installed (cross-
compiling)
$ [ service ] stap-server start -a ARCH -r /BUILDDIR
To stop one of the servers by referencing its process id (obtained by
running stap-server status):
$ [ service ] stap-server stop -p PID
To run a script using a compile server:
$ stap SCRIPT --use-server
To run a script as an unprivileged user using a compile server:
$ stap SCRIPT
To stop all running servers:
$ [ service ] stap-server stop
To restart servers after a global configuration change and/or when
default servers have been added, changed, or removed:
$ [ service ] stap-server force-reload
Systemtap is an administrative tool. It exposes kernel internal data
structures and potentially private user information. See the stap(1)
manual page for additional information on safety and security.
As a network server, stap-server should be activated with care in
order to limit the potential effects of bugs or mischevious users.
Consider the following prophylactic measures.
1 Run stap-server as an unprivileged user, never as root.
When invoked as a service (i.e. service stap-server ...), each
server is run, by default, as the user stap-server. When
invoked directly (i.e. stap-server ...), each server is run,
by default, as the invoking user. In each case, another user
may be selected by using the -u option on invocation, by
specifying STAP_USER=username in the global configuration file
or by specifying USER=username in an individual server
configuration file. The invoking user must have authority to
run processes as another user. See CONFIGURATION.
The selected user must have write access to the server log
file. The location of the server log file may be changed by
setting LOG_FILE=path in the global configuration file. See
CONFIGURATION.
The selected user must have read/write access to the directory
containing the server status files. The location of the
server status files may be changed by setting STAT_PATH=path
in the global configuration file. See CONFIGURATION.
The selected user must have read/write access to the
uprobes.ko build directory and its files.
Neither form of stap-server will run if the selected user is
root.
2 Run stap-server requests with resource limits that impose
maximum cpu time, file size, memory consumption, in order to
bound the effects of processing excessively large or bogus
inputs.
When the user running the server is stap-server, each server
request is run with limits specified in ~stap-
server/.systemtap/rc otherwise, no limits are imposed.
3 Run stap-server with a TMPDIR environment variable that points
to a separate and/or quota-enforced directory, in order to
prevent filling up of important filesystems.
The default TMPDIR is /tmp/.
4 Activate network firewalls to limit stap client connections to
relatively trustworthy networks.
For automatic selection of servers by clients, avahi must be
installed on both the server and client hosts and mDNS
messages must be allowed through the firewall.
The systemtap compile server and its related utilities use the Secure
Socket Layer (SSL) as implemented by Network Security Services (NSS)
for network security. NSS is also used for the generation and
management of certificates. The related certificate databases must be
protected in order to maintain the security of the system. Use of
the utilities provided will help to ensure that the proper protection
is maintained. The systemtap client will check for proper access
permissions before making use of any certificate database.
Important files and their corresponding paths can be located in the
stappaths (7) manual page.
stap(1),
staprun(8),
stapprobes(3stap),
stappaths(7),
stapex(3stap),
avahi,
ulimit(1),
NSS
Use the Bugzilla link of the project web page or our mailing list.
http://sourceware.org/systemtap/ , <systemtap@sourceware.org>.
This page is part of the systemtap (a tracing and live-system
analysis tool) project. Information about the project can be found
at ⟨https://sourceware.org/systemtap/⟩. If you have a bug report for
this manual page, send it to systemtap@sourceware.org. This page was
obtained from the project's upstream Git repository
⟨git://sourceware.org/git/systemtap.git⟩ on 2018-02-02. (At that
time, the date of the most recent commit that was found in the repos‐
itory was 2018-02-01.) If you discover any rendering problems in
this HTML version of the page, or you believe there is a better or
more up-to-date source for the page, or you have corrections or
improvements to the information in this COLOPHON (which is not part
of the original manual page), send a mail to man-pages@man7.org
STAP-SERVER(8)
Pages that refer to this page: stap(1), stap-merge(1), stappaths(7), warning::debuginfo(7stap), stapdyn(8), staprun(8)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|