|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | EXIT STATUS | SEE ALSO | COLOPHON |
|
ovn-sbctl(8) Open vSwitch Manual ovn-sbctl(8)
ovn-sbctl - utility for querying and configuring OVN_Southbound data‐
base
ovn-sbctl [options] -- [options] command [args] [-- [options] command
[args]]...
The ovn-sbctl program configures the OVN_Southbound database by
providing a high-level interface to its configuration database. See
ovn-sb(5) for comprehensive documentation of the database schema.
ovn-sbctl connects to an ovsdb-server process that maintains an
OVN_Southbound configuration database. Using this connection, it
queries and possibly applies changes to the database, depending on
the supplied commands.
ovn-sbctl can perform any number of commands in a single run,
implemented as a single atomic transaction against the database.
The ovn-sbctl command line begins with global options (see OPTIONS
below for details). The global options are followed by one or more
commands. Each command should begin with -- by itself as a command-
line argument, to separate it from the following commands. (The --
before the first command is optional.) The command itself starts
with command-specific options, if any, followed by the command name
and any arguments.
The following options affect the behavior of ovn-sbctl as a whole.
Some individual commands also accept their own options, which are
given just before the command name. If the first command on the
command line has options, then those options must be separated from
the global options by --.
--db=server
The OVSDB database remote to contact. If the OVN_SB_DB
environment variable is set, its value is used as the default.
Otherwise, the default is
unix:/usr/local/var/run/openvswitch/ovnsb_db.sock, but this
default is unlikely to be useful outside of single-machine OVN
test environments.
server must take one of the following forms:
ssl:ip:port
tcp:ip:port
The given SSL or plain TCP port on the host at the
given ip, which must be expressed as an IP address (not
a DNS name) in IPv4 or IPv6 address format. If ip is
an IPv6 address, then wrap ip with square brackets,
e.g.: ssl:[::1]:6640. On Linux, use %device to
designate a scope for IPv6 link-level addresses, e.g.
ssl:[fe80::1234%eth0]:6653. For ssl, the
--private-key, --certificate, and --ca-cert options are
mandatory.
unix:file
On POSIX, connect to the Unix domain server socket
named file.
On Windows, connect to a local named pipe that is
represented by a file created in the path file to mimic
the behavior of a Unix domain socket.
pssl:port[:ip]
ptcp:port[:ip]
Listen on the given SSL or TCP port for a connection.
By default, connections are not bound to a particular
local IP address and it listens only on IPv4 (but not
IPv6) addresses, but specifying ip limits connections
to those from the given ip, either IPv4 or IPv6
address. If ip is an IPv6 address, then wrap ip with
square brackets, e.g.: pssl:6640:[::1]. On Linux, use
%device to designate a scope for IPv6 link-level
addresses, e.g. pssl:6653:[fe80::1234%eth0]. For pssl,
the --private-key, --certificate, and --ca-cert options
are mandatory.
punix:file
On POSIX, listen on the Unix domain server socket named
file for a connection.
On Windows, listen on a local named pipe. A file is
created in the path file to mimic the behavior of a
Unix domain socket.
--no-syslog
By default, ovn-sbctl logs its arguments and the details of
any changes that it makes to the system log. This option
disables this logging.
This option is equivalent to --verbose=sbctl:syslog:warn.
--oneline
Modifies the output format so that the output for each command
is printed on a single line. New-line characters that would
otherwise separate lines are printed as \n, and any instances
of \ that would otherwise appear in the output are doubled.
Prints a blank line for each command that has no output. This
option does not affect the formatting of output from the list
or find commands; see Table Formatting Options below.
--dry-run
Prevents ovn-sbctl from actually modifying the database.
-t secs
--timeout=secs
By default, or with a secs of 0, ovn-sbctl waits forever for a
response from the database. This option limits runtime to
approximately secs seconds. If the timeout expires, ovn-sbctl
will exit with a SIGALRM signal. (A timeout would normally
happen only if the database cannot be contacted, or if the
system is overloaded.)
-v[spec]
--verbose=[spec]
Sets logging levels. Without any spec, sets the log level for
every module and destination to dbg. Otherwise, spec is a
list of words separated by spaces or commas or colons, up to
one from each category below:
· A valid module name, as displayed by the vlog/list
command on ovs-appctl(8), limits the log level change
to the specified module.
· syslog, console, or file, to limit the log level change
to only to the system log, to the console, or to a
file, respectively. (If --detach is specified,
ovn-sbctl closes its standard file descriptors, so
logging to the console will have no effect.)
On Windows platform, syslog is accepted as a word and
is only useful along with the --syslog-target option
(the word has no effect otherwise).
· off, emer, err, warn, info, or dbg, to control the log
level. Messages of the given severity or higher will
be logged, and messages of lower severity will be
filtered out. off filters out all messages. See
ovs-appctl(8) for a definition of each log level.
Case is not significant within spec.
Regardless of the log levels set for file, logging to a file
will not take place unless --log-file is also specified (see
below).
For compatibility with older versions of OVS, any is accepted
as a word but has no effect.
-v
--verbose
Sets the maximum logging verbosity level, equivalent to
--verbose=dbg.
-vPATTERN:destination:pattern
--verbose=PATTERN:destination:pattern
Sets the log pattern for destination to pattern. Refer to
ovs-appctl(8) for a description of the valid syntax for
pattern.
-vFACILITY:facility
--verbose=FACILITY:facility
Sets the RFC5424 facility of the log message. facility can be
one of kern, user, mail, daemon, auth, syslog, lpr, news,
uucp, clock, ftp, ntp, audit, alert, clock2, local0, local1,
local2, local3, local4, local5, local6 or local7. If this
option is not specified, daemon is used as the default for the
local system syslog and local0 is used while sending a message
to the target provided via the --syslog-target option.
--log-file[=file]
Enables logging to a file. If file is specified, then it is
used as the exact name for the log file. The default log file
name used if file is omitted is
/usr/local/var/log/openvswitch/ovn-sbctl.log.
--syslog-target=host:port
Send syslog messages to UDP port on host, in addition to the
system syslog. The host must be a numerical IP address, not a
hostname.
--syslog-method=method
Specify method how syslog messages should be sent to syslog
daemon. Following forms are supported:
· libc, use libc syslog() function. This is the default
behavior. Downside of using this options is that libc
adds fixed prefix to every message before it is
actually sent to the syslog daemon over /dev/log UNIX
domain socket.
· unix:file, use UNIX domain socket directly. It is
possible to specify arbitrary message format with this
option. However, rsyslogd 8.9 and older versions use
hard coded parser function anyway that limits UNIX
domain socket use. If you want to use arbitrary
message format with older rsyslogd versions, then use
UDP socket to localhost IP address instead.
· udp:ip:port, use UDP socket. With this method it is
possible to use arbitrary message format also with
older rsyslogd. When sending syslog messages over UDP
socket extra precaution needs to be taken into account,
for example, syslog daemon needs to be configured to
listen on the specified UDP port, accidental iptables
rules could be interfering with local syslog traffic
and there are some security considerations that apply
to UDP sockets, but do not apply to UNIX domain
sockets.
-h
--help Prints a brief help message to the console.
-V
--version
Prints version information to the console.
Table Formatting Options
These options control the format of output from the list and find
commands.
-f format
--format=format
Sets the type of table formatting. The following types of
format are available:
table 2-D text tables with aligned columns.
list (default)
A list with one column per line and rows separated by a
blank line.
html HTML tables.
csv Comma-separated values as defined in RFC 4180.
json JSON format as defined in RFC 4627. The output is a
sequence of JSON objects, each of which corresponds to
one table. Each JSON object has the following members
with the noted values:
caption
The table's caption. This member is omitted if
the table has no caption.
headings
An array with one element per table column.
Each array element is a string giving the
corresponding column's heading.
data An array with one element per table row. Each
element is also an array with one element per
table column. The elements of this second-level
array are the cells that constitute the table.
Cells that represent OVSDB data or data types
are expressed in the format described in the
OVSDB specification; other cells are simply
expressed as text strings.
-d format
--data=format
Sets the formatting for cells within output tables unless the
table format is set to json, in which case json formatting is
always used when formatting cells. The following types of
format are available:
string (default)
The simple format described in the Database Values
section of ovs-vsctl(8).
bare The simple format with punctuation stripped off: [] and
{} are omitted around sets, maps, and empty columns,
items within sets and maps are space-separated, and
strings are never quoted. This format may be easier
for scripts to parse.
json The RFC 4627 JSON format as described above.
--no-headings
This option suppresses the heading row that otherwise appears
in the first row of table output.
--pretty
By default, JSON in output is printed as compactly as
possible. This option causes JSON in output to be printed in
a more readable fashion. Members of objects and elements of
arrays are printed one per line, with indentation.
This option does not affect JSON in tables, which is always
printed compactly.
--bare Equivalent to --format=list --data=bare --no-headings.
Public Key Infrastructure Options
-p privkey.pem
--private-key=privkey.pem
Specifies a PEM file containing the private key used as
ovn-sbctl's identity for outgoing SSL connections.
-c cert.pem
--certificate=cert.pem
Specifies a PEM file containing a certificate that certifies
the private key specified on -p or --private-key to be
trustworthy. The certificate must be signed by the
certificate authority (CA) that the peer in SSL connections
will use to verify it.
-C cacert.pem
--ca-cert=cacert.pem
Specifies a PEM file containing the CA certificate that
ovn-sbctl should use to verify certificates presented to it by
SSL peers. (This may be the same certificate that SSL peers
use to verify the certificate specified on -c or
--certificate, or it may be a different one, depending on the
PKI design in use.)
-C none
--ca-cert=none
Disables verification of certificates presented by SSL peers.
This introduces a security risk, because it means that
certificates cannot be verified to be those of known trusted
hosts.
--bootstrap-ca-cert=cacert.pem
When cacert.pem exists, this option has the same effect as -C
or --ca-cert. If it does not exist, then ovn-sbctl will
attempt to obtain the CA certificate from the SSL peer on its
first SSL connection and save it to the named PEM file. If it
is successful, it will immediately drop the connection and
reconnect, and from then on all SSL connections must be
authenticated by a certificate signed by the CA certificate
thus obtained.
This option exposes the SSL connection to a man-in-the-middle
attack obtaining the initial CA certificate, but it may be
useful for bootstrapping.
This option is only useful if the SSL peer sends its CA
certificate as part of the SSL certificate chain. The SSL
protocol does not require the server to send the CA
certificate.
This option is mutually exclusive with -C and --ca-cert.
--peer-ca-cert=peer-cacert.pem
Specifies a PEM file that contains one or more additional
certificates to send to SSL peers. peer-cacert.pem should be
the CA certificate used to sign ovn-sbctl's own certificate,
that is, the certificate specified on -c or --certificate. If
ovn-sbctl's certificate is self-signed, then --certificate and
--peer-ca-cert should specify the same file.
This option is not useful in normal operation, because the SSL
peer must already have the CA certificate for the peer to have
any confidence in ovn-sbctl's identity. However, this offers
a way for a new installation to bootstrap the CA certificate
on its first SSL connection.
The commands implemented by ovn-sbctl are described in the sections
below.
OVN_Southbound Commands
These commands work with an OVN_Southbound database as a whole.
init Initializes the database, if it is empty. If the database has
already been initialized, this command has no effect.
show Prints a brief overview of the database contents.
Chassis Commands
These commands manipulate OVN_Southbound chassis.
[--may-exist] chassis-add chassis encap-type encap-ip
Creates a new chassis named chassis. encap-type is a comma-
separated list of tunnel types. The chassis will have one
encap entry for each specified tunnel type with encap-ip as
the destination IP for each.
Without --may-exist, attempting to create a chassis that
exists is an error. With --may-exist, this command does
nothing if chassis already exists.
[--if-exists] chassis-del chassis
Deletes chassis and its encaps and gateway_ports.
Without --if-exists, attempting to delete a chassis that does
not exist is an error. With --if-exists, attempting to delete
a chassis that does not exist has no effect.
Port binding Commands
These commands manipulate OVN_Southbound port bindings.
[--may-exist] lsp-bind logical-port chassis
Binds the logical port named logical-port to chassis.
Without --may-exist, attempting to bind a logical port that
has already been bound is an error. With --may-exist, this
command does nothing if logical-port has already been bound to
a chassis.
[--if-exists] lsp-unbind logical-port
Resets the binding of logical-port to NULL.
Without --if-exists, attempting to unbind a logical port that
is not bound is an error. With --if-exists, attempting to
unbind logical port that is not bound has no effect.
Logical Flow Commands
[--uuid] [--ovs[=remote]] [--stats] lflow-list [logical-datapath]
[lflow...]
List logical flows. If logical-datapath is specified, only
list flows for that logical datapath. The logical-datapath
may be given as a UUID or as a datapath name (reporting an
error if multiple datapaths have the same name).
If at least one lflow is given, only matching logical flows,
if any, are listed. Each lflow may be specified as a UUID or
the first few characters of a UUID, optionally prefixed by 0x.
(Because ovn-controller sets OpenFlow flow cookies to the
first 32 bits of the corresponding logical flow's UUID, this
makes it easy to look up the logical flow that generated a
particular OpenFlow flow.)
If --uuid is specified, the output includes the first 32 bits
of each logical flow's UUID. This makes it easier to find the
OpenFlow flows that correspond to a given logical flow.
If --ovs is included, ovn-sbctl attempts to obtain and display
the OpenFlow flows that correspond to each OVN logical flow.
To do so, ovn-sbctl connects to remote (by default,
unix:/usr/local/var/run/openvswitch/br-int.mgmt) over OpenFlow
and retrieves the flows. If remote is specified, it must be
an active OpenFlow connection method described in
ovs-ofctl(8). Please see the discussion of the similar --ovs
option in ovn-trace(8) for more information about the OpenFlow
flow output.
By default, OpenFlow flow output includes only match and
actions. Add --stats to include all OpenFlow information,
such as packet and byte counters, duration, and timeouts.
[--uuid] dump-flows [logical-datapath]
Alias for lflow-list.
Remote Connectivity Commands
These commands manipulate the connections column in the SB_Global
table and rows in the Connection table. When ovsdb-server is
configured to use the connections column for OVSDB connections, this
allows the administrator to use ovn-sbctl to configure database
connections.
get-connection
Prints the configured connection(s).
del-connection
Deletes the configured connection(s).
set-connection [access-specifier] target...
Sets the configured manager target or targets. Each target
may be preceded by an optional access-specifier (read-only or
read-write) and may use any of the following forms:
ssl:ip:port
tcp:ip:port
The given SSL or plain TCP port on the host at the
given ip, which must be expressed as an IP address (not
a DNS name) in IPv4 or IPv6 address format. If ip is
an IPv6 address, then wrap ip with square brackets,
e.g.: ssl:[::1]:6640. On Linux, use %device to
designate a scope for IPv6 link-level addresses, e.g.
ssl:[fe80::1234%eth0]:6653. For ssl, the
--private-key, --certificate, and --ca-cert options are
mandatory.
unix:file
On POSIX, connect to the Unix domain server socket
named file.
On Windows, connect to a local named pipe that is
represented by a file created in the path file to mimic
the behavior of a Unix domain socket.
pssl:port[:ip]
ptcp:port[:ip]
Listen on the given SSL or TCP port for a connection.
By default, connections are not bound to a particular
local IP address and it listens only on IPv4 (but not
IPv6) addresses, but specifying ip limits connections
to those from the given ip, either IPv4 or IPv6
address. If ip is an IPv6 address, then wrap ip with
square brackets, e.g.: pssl:6640:[::1]. On Linux, use
%device to designate a scope for IPv6 link-level
addresses, e.g. pssl:6653:[fe80::1234%eth0]. For pssl,
the --private-key, --certificate, and --ca-cert options
are mandatory.
punix:file
On POSIX, listen on the Unix domain server socket named
file for a connection.
On Windows, listen on a local named pipe. A file is
created in the path file to mimic the behavior of a
Unix domain socket.
If provided, the effect of the access specifier persists for
subsequent targets until changed by another access specifier.
SSL Configuration
When ovsdb-server is configured to connect using SSL, the following
parameters are required:
private-key
Specifies a PEM file containing the private key used for SSL
connections.
certificate
Specifies a PEM file containing a certificate, signed by the
certificate authority (CA) used by the connection peers, that
certifies the private key, identifying a trustworthy peer.
ca-cert
Specifies a PEM file containing the CA certificate used to
verify that the connection peers are trustworthy.
These SSL settings apply to all SSL connections made by the
southbound database server.
get-ssl
Prints the SSL configuration.
del-ssl
Deletes the current SSL configuration.
[--bootstrap] set-ssl private-key certificate ca-cert [ssl-protocol-
list [ssl-cipher-list]]
Sets the SSL configuration. The --bootstrap option is
described below.
CA Certificate Bootstrap
Ordinarily, all of the files named in the SSL configuration must
exist before SSL connectivity can be used. However, if the ca-cert
file does not exist and the --bootstrap option is given, then
ovsdb-server will attempt to obtain the CA certificate from the
target on its first SSL connection and save it to the named PEM file.
If it is successful, it will immediately drop the connection and
reconnect, and from then on all SSL connections must be authenticated
by a certificate signed by the CA certificate thus obtained.
This option exposes the SSL connection to a man-in-the-middle attack
obtaining the initial CA certificate, but it may be useful for
bootstrapping.
This option is only useful if the SSL peer sends its CA certificate
as part of the SSL certificate chain. The SSL protocol does not
require the controller to send the CA certificate.
Database Commands
These commands query and modify the contents of ovsdb tables. They
are a slight abstraction of the ovsdb interface and as such they
operate at a lower level than other ovs-sbctl commands.
Identifying Tables, Records, and Columns
Each of these commands has a table parameter to identify a table
within the database. Many of them also take a record parameter that
identifies a particular record within a table. The record parameter
may be the UUID for a record, and many tables offer additional ways
to identify records. Some commands also take column parameters that
identify a particular field within the records in a table.
Record names must be specified in full and with correct
capitalization, except that UUIDs may be abbreviated to their first 4
(or more) hex digits, as long as that is unique within the table.
Names of tables and columns are not case-sensitive, and - and _ are
treated interchangeably. Unique abbreviations of table and column
names are acceptable, e.g. addr or a is sufficient to identify the
Address_Set table.
Database Values
Each column in the database accepts a fixed type of data. The
currently defined basic types, and their representations, are:
integer
A decimal integer in the range -2**63 to 2**63-1, inclusive.
real A floating-point number.
Boolean
True or false, written true or false, respectively.
string An arbitrary Unicode string, except that null bytes are not
allowed. Quotes are optional for most strings that begin with
an English letter or underscore and consist only of letters,
underscores, hyphens, and periods. However, true and false
and strings that match the syntax of UUIDs (see below) must be
enclosed in double quotes to distinguish them from other basic
types. When double quotes are used, the syntax is that of
strings in JSON, e.g. backslashes may be used to escape
special characters. The empty string must be represented as a
pair of double quotes ("").
UUID Either a universally unique identifier in the style of RFC
4122, e.g. f81d4fae-7dec-11d0-a765-00a0c91e6bf6, or an @name
defined by a get or create command within the same ovn-sbctl
invocation.
Multiple values in a single column may be separated by spaces or a
single comma. When multiple values are present, duplicates are not
allowed, and order is not important. Conversely, some database
columns can have an empty set of values, represented as [], and
square brackets may optionally enclose other non-empty sets or single
values as well. For a column accepting a set of integers, database
commands accept a range. A range is represented by two integers
separated by -. A range is inclusive. A range has a maximum size of
4096 elements. If more elements are needed, they can be specified in
seperate ranges.
A few database columns are ``maps'' of key-value pairs, where the key
and the value are each some fixed database type. These are specified
in the form key=value, where key and value follow the syntax for the
column's key type and value type, respectively. When multiple pairs
are present (separated by spaces or a comma), duplicate keys are not
allowed, and again the order is not important. Duplicate values are
allowed. An empty map is represented as {}. Curly braces may
optionally enclose non-empty maps as well (but use quotes to prevent
the shell from expanding other-config={0=x,1=y} into other-config=0=x
other-config=1=y, which may not have the desired effect).
Database Command Syntax
[--if-exists] [--columns=column[,column]...] list table [record]...
Lists the data in each specified record. If no records are
specified, lists all the records in table.
If --columns is specified, only the requested columns are
listed, in the specified order. Otherwise, all columns are
listed, in alphabetical order by column name.
Without --if-exists, it is an error if any specified record
does not exist. With --if-exists, the command ignores any
record that does not exist, without producing any output.
[--columns=column[,column]...] find table [column[:key]=value]...
Lists the data in each record in table whose column equals
value or, if key is specified, whose column contains a key
with the specified value. The following operators may be used
where = is written in the syntax summary:
= != < > <= >=
Selects records in which column[:key] equals, does not
equal, is less than, is greater than, is less than or
equal to, or is greater than or equal to value,
respectively.
Consider column[:key] and value as sets of elements.
Identical sets are considered equal. Otherwise, if the
sets have different numbers of elements, then the set
with more elements is considered to be larger.
Otherwise, consider a element from each set pairwise,
in increasing order within each set. The first pair
that differs determines the result. (For a column that
contains key-value pairs, first all the keys are
compared, and values are considered only if the two
sets contain identical keys.)
{=} {!=}
Test for set equality or inequality, respectively.
{<=} Selects records in which column[:key] is a subset of
value. For example, flood-vlans{<=}1,2 selects records
in which the flood-vlans column is the empty set or
contains 1 or 2 or both.
{<} Selects records in which column[:key] is a proper
subset of value. For example, flood-vlans{<}1,2
selects records in which the flood-vlans column is the
empty set or contains 1 or 2 but not both.
{>=} {>}
Same as {<=} and {<}, respectively, except that the
relationship is reversed. For example, flood-
vlans{>=}1,2 selects records in which the flood-vlans
column contains both 1 and 2.
For arithmetic operators (= != < > <= >=), when key is
specified but a particular record's column does not contain
key, the record is always omitted from the results. Thus, the
condition other-config:mtu!=1500 matches records that have a
mtu key whose value is not 1500, but not those that lack an
mtu key.
For the set operators, when key is specified but a particular
record's column does not contain key, the comparison is done
against an empty set. Thus, the condition other-
config:mtu{!=}1500 matches records that have a mtu key whose
value is not 1500 and those that lack an mtu key.
Don't forget to escape < or > from interpretation by the
shell.
If --columns is specified, only the requested columns are
listed, in the specified order. Otherwise all columns are
listed, in alphabetical order by column name.
The UUIDs shown for rows created in the same ovn-sbctl
invocation will be wrong.
[--if-exists] [--id=@name] get table record [column[:key]]...
Prints the value of each specified column in the given record
in table. For map columns, a key may optionally be specified,
in which case the value associated with key in the column is
printed, instead of the entire map.
Without --if-exists, it is an error if record does not exist
or key is specified, if key does not exist in record. With
--if-exists, a missing record yields no output and a missing
key prints a blank line.
If @name is specified, then the UUID for record may be
referred to by that name later in the same ovn-sbctl
invocation in contexts where a UUID is expected.
Both --id and the column arguments are optional, but usually
at least one or the other should be specified. If both are
omitted, then get has no effect except to verify that record
exists in table.
--id and --if-exists cannot be used together.
[--if-exists] set table record column[:key]=value...
Sets the value of each specified column in the given record in
table to value. For map columns, a key may optionally be
specified, in which case the value associated with key in that
column is changed (or added, if none exists), instead of the
entire map.
Without --if-exists, it is an error if record does not exist.
With --if-exists, this command does nothing if record does not
exist.
[--if-exists] add table record column [key=]value...
Adds the specified value or key-value pair to column in record
in table. If column is a map, then key is required, otherwise
it is prohibited. If key already exists in a map column, then
the current value is not replaced (use the set command to
replace an existing value).
Without --if-exists, it is an error if record does not exist.
With --if-exists, this command does nothing if record does not
exist.
[--if-exists] remove table record column value...
[--if-exists] remove table record column key...
[--if-exists] remove table record column key=value...
Removes the specified values or key-value pairs from column in
record in table. The first form applies to columns that are
not maps: each specified value is removed from the column.
The second and third forms apply to map columns: if only a key
is specified, then any key-value pair with the given key is
removed, regardless of its value; if a value is given then a
pair is removed only if both key and value match.
It is not an error if the column does not contain the
specified key or value or pair.
Without --if-exists, it is an error if record does not exist.
With --if-exists, this command does nothing if record does not
exist.
[--if-exists] clear table record column...
Sets each column in record in table to the empty set or empty
map, as appropriate. This command applies only to columns
that are allowed to be empty.
Without --if-exists, it is an error if record does not exist.
With --if-exists, this command does nothing if record does not
exist.
[--id=@name] create table column[:key]=value...
Creates a new record in table and sets the initial values of
each column. Columns not explicitly set will receive their
default values. Outputs the UUID of the new row.
If @name is specified, then the UUID for the new row may be
referred to by that name elsewhere in the same ovn-sbctl
invocation in contexts where a UUID is expected. Such
references may precede or follow the create command.
Caution (ovs-vsctl as example)
Records in the Open vSwitch database are significant
only when they can be reached directly or indirectly
from the Open_vSwitch table. Except for records in the
QoS or Queue tables, records that are not reachable
from the Open_vSwitch table are automatically deleted
from the database. This deletion happens immediately,
without waiting for additional ovs-vsctl commands or
other database activity. Thus, a create command must
generally be accompanied by additional commands within
the same ovs-vsctl invocation to add a chain of
references to the newly created record from the top-
level Open_vSwitch record. The EXAMPLES section gives
some examples that show how to do this.
[--if-exists] destroy table record...
Deletes each specified record from table. Unless --if-exists
is specified, each records must exist.
--all destroy table
Deletes all records from the table.
Caution (ovs-vsctl as example)
The destroy command is only useful for records in the
QoS or Queue tables. Records in other tables are
automatically deleted from the database when they
become unreachable from the Open_vSwitch table. This
means that deleting the last reference to a record is
sufficient for deleting the record itself. For records
in these tables, destroy is silently ignored. See the
EXAMPLES section below for more information.
wait-until table record [column[:key]=value]...
Waits until table contains a record named record whose column
equals value or, if key is specified, whose column contains a
key with the specified value. Any of the operators !=, <, >,
<=, or >= may be substituted for = to test for inequality,
less than, greater than, less than or equal to, or greater
than or equal to, respectively. (Don't forget to escape < or
> from interpretation by the shell.)
If no column[:key]=value arguments are given, this command
waits only until record exists. If more than one such
argument is given, the command waits until all of them are
satisfied.
Caution (ovs-vsctl as example)
Usually wait-until should be placed at the beginning of
a set of ovs-vsctl commands. For example, wait-until
bridge br0 -- get bridge br0 datapath_id waits until a
bridge named br0 is created, then prints its
datapath_id column, whereas get bridge br0 datapath_id
-- wait-until bridge br0 will abort if no bridge named
br0 exists when ovs-vsctl initially connects to the
database.
Consider specifying --timeout=0 along with --wait-until, to
prevent ovn-sbctl from terminating after waiting only at most
5 seconds.
comment [arg]...
This command has no effect on behavior, but any database log
record created by the command will include the command and its
arguments.
0 Successful program execution.
1 Usage, syntax, or configuration file error.
ovn-sb(5).
This page is part of the Open vSwitch (a distributed virtual
multilayer switch) project. Information about the project can be
found at ⟨http://openvswitch.org/⟩. If you have a bug report for
this manual page, send it to bugs@openvswitch.org. This page was
obtained from the project's upstream Git repository
⟨https://github.com/openvswitch/ovs.git⟩ on 2018-02-02. (At that
time, the date of the most recent commit that was found in the repos‐
itory was 2018-02-01.) If you discover any rendering problems in
this HTML version of the page, or you believe there is a better or
more up-to-date source for the page, or you have corrections or
improvements to the information in this COLOPHON (which is not part
of the original manual page), send a mail to man-pages@man7.org
Open vSwitch 2.8.90 ovn-sbctl(8)
Pages that refer to this page: ovn-detrace(1)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|