|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMON OPTIONS | DIAGNOSTIC | SEE ALSO | AUTHOR | COLOPHON |
|
LXC-CREATE(1) LXC-CREATE(1)
lxc-create - creates a container
lxc-create -n name [ -f config_file ] -t template [ -B backingstore
] [ -- template-options ]
lxc-create creates a system object where is stored the configuration
information and where can be stored user information. The identifier
name is used to specify the container to be used with the different
lxc commands.
The object is a directory created in /usr/local/var/lib/lxc and
identified by its name.
The object is the definition of the different resources an
application can use or can see. The more the configuration file
contains information, the more the container is isolated and the more
the application is jailed.
If the configuration file config_file is not specified, the container
will be created with the default isolation: processes, sysv ipc and
mount points.
-f, --config config_file
Specify the configuration file to configure the virtualization
and isolation functionalities for the container.
-t, --template template
'template' is the short name of an existing 'lxc-template'
script that is called by lxc-create, eg. busybox, debian,
fedora, ubuntu or sshd. Refer to the examples in
/usr/local/share/lxc/templates for details of the expected
script structure. Alternatively, the full path to an
executable template script can also be passed as a parameter.
"none" can be used to force lxc-create to skip rootfs
creation.
-B, --bdev backingstore
'backingstore' is one of 'dir', 'lvm', 'loop', 'btrfs', 'zfs',
'rbd', or 'best'. The default is 'dir', meaning that the
container root filesystem will be a directory under
/usr/local/var/lib/lxc/container/rootfs. This backing store
type allows the optional --dir ROOTFS to be specified, meaning
that the container rootfs should be placed under the specified
path, rather than the default. (The 'none' backingstore type
is an alias for 'dir'.) If 'btrfs' is specified, then the
target filesystem must be btrfs, and the container rootfs will
be created as a new subvolume. This allows snapshotted clones
to be created, but also causes rsync --one-filesystem to treat
it as a separate filesystem. If backingstore is 'lvm', then
an lvm block device will be used and the following further
options are available: --lvname lvname1 will create an LV
named lvname1 rather than the default, which is the container
name. --vgname vgname1 will create the LV in volume group
vgname1 rather than the default, lxc. --thinpool thinpool1
will create the LV as a thin-provisioned volume in the pool
named thinpool1 rather than the default, lxc. --fstype FSTYPE
will create an FSTYPE filesystem on the LV, rather than the
default, which is ext4. --fssize SIZE will create a LV (and
filesystem) of size SIZE rather than the default, which is 1G.
If backingstore is 'loop', you can use --fstype FSTYPE and
--fssize SIZE as 'lvm'. The default values for these options
are the same as 'lvm'.
If backingstore is 'rbd', then you will need to have a valid
configuration in ceph.conf and a ceph.client.admin.keyring
defined. You can specify the following options : --rbdname
RBDNAME will create a blockdevice named RBDNAME rather than
the default, which is the container name. --rbdpool POOL will
create the blockdevice in the pool named POOL, rather than the
default, which is 'lxc'.
If backingstore is 'best', then lxc will try, in order, btrfs,
zfs, lvm, and finally a directory backing store.
-- template-options
This will pass template-options to the template as arguments.
To see the list of options supported by the template, you can
run lxc-create -t TEMPLATE -h.
These options are common to most of lxc commands.
-?, -h, --help
Print a longer usage message than normal.
--usage
Give the usage message
-q, --quiet
mute on
-P, --lxcpath=PATH
Use an alternate container path. The default is
/usr/local/var/lib/lxc.
-o, --logfile=FILE
Output to an alternate log FILE. The default is no log.
-l, --logpriority=LEVEL
Set log priority to LEVEL. The default log priority is ERROR.
Possible values are : FATAL, CRIT, WARN, ERROR, NOTICE, INFO,
DEBUG.
Note that this option is setting the priority of the events
log in the alternate log file. It do not have effect on the
ERROR events log on stderr.
-n, --name=NAME
Use container identifier NAME. The container identifier
format is an alphanumeric string.
--rcfile=FILE
Specify the configuration file to configure the virtualization
and isolation functionalities for the container.
This configuration file if present will be used even if there
is already a configuration file present in the previously
created container (via lxc-create).
--version
Show the version number.
The container already exists
As the message mention it, you try to create a container but
there is a container with the same name. You can use the lxc-
ls command to list the available containers on the system.
lxc(7), lxc-create(1), lxc-copy(1), lxc-destroy(1), lxc-start(1),
lxc-stop(1), lxc-execute(1), lxc-console(1), lxc-monitor(1),
lxc-wait(1), lxc-cgroup(1), lxc-ls(1), lxc-info(1), lxc-freeze(1),
lxc-unfreeze(1), lxc-attach(1), lxc.conf(5)
Daniel Lezcano <daniel.lezcano@free.fr>
This page is part of the lxc (Linux containers) project. Information
about the project can be found at ⟨http://linuxcontainers.org/⟩. If
you have a bug report for this manual page, send it to
lxc-devel@lists.linuxcontainers.org. This page was obtained from the
project's upstream Git repository ⟨git://github.com/lxc/lxc⟩ on
2018-02-02. (At that time, the date of the most recent commit that
was found in the repository was 2018-02-01.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
2018-02-02 LXC-CREATE(1)
Pages that refer to this page: lxc-attach(1), lxc-autostart(1), lxc-cgroup(1), lxc-checkconfig(1), lxc-checkpoint(1), lxc-config(1), lxc-console(1), lxc-copy(1), lxc-create(1), lxc-destroy(1), lxc-device(1), lxc-execute(1), lxc-freeze(1), lxc-info(1), lxc-ls(1), lxc-monitor(1), lxc-snapshot(1), lxc-start(1), lxc-stop(1), lxc-top(1), lxc-unfreeze(1), lxc-unshare(1), lxc-update-config(1), lxc-usernsexec(1), lxc-wait(1), lxc.container.conf(5), lxc.system.conf(5), lxc(7)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|