|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEQUENCER SUBCOMMANDS | EXAMPLES | SEE ALSO | GIT | COLOPHON |
|
GIT-CHERRY-PICK(1) Git Manual GIT-CHERRY-PICK(1)
git-cherry-pick - Apply the changes introduced by some existing
commits
git cherry-pick [--edit] [-n] [-m parent-number] [-s] [-x] [--ff]
[-S[<keyid>]] <commit>...
git cherry-pick --continue
git cherry-pick --quit
git cherry-pick --abort
Given one or more existing commits, apply the change each one
introduces, recording a new commit for each. This requires your
working tree to be clean (no modifications from the HEAD commit).
When it is not obvious how to apply a change, the following happens:
1. The current branch and HEAD pointer stay at the last commit
successfully made.
2. The CHERRY_PICK_HEAD ref is set to point at the commit that
introduced the change that is difficult to apply.
3. Paths in which the change applied cleanly are updated both in the
index file and in your working tree.
4. For conflicting paths, the index file records up to three
versions, as described in the "TRUE MERGE" section of
git-merge(1). The working tree files will include a description
of the conflict bracketed by the usual conflict markers <<<<<<<
and >>>>>>>.
5. No other modifications are made.
See git-merge(1) for some hints on resolving such conflicts.
<commit>...
Commits to cherry-pick. For a more complete list of ways to spell
commits, see gitrevisions(7). Sets of commits can be passed but
no traversal is done by default, as if the --no-walk option was
specified, see git-rev-list(1). Note that specifying a range will
feed all <commit>... arguments to a single revision walk (see a
later example that uses maint master..next).
-e, --edit
With this option, git cherry-pick will let you edit the commit
message prior to committing.
-x
When recording the commit, append a line that says "(cherry
picked from commit ...)" to the original commit message in order
to indicate which commit this change was cherry-picked from. This
is done only for cherry picks without conflicts. Do not use this
option if you are cherry-picking from your private branch because
the information is useless to the recipient. If on the other hand
you are cherry-picking between two publicly visible branches
(e.g. backporting a fix to a maintenance branch for an older
release from a development branch), adding this information can
be useful.
-r
It used to be that the command defaulted to do -x described
above, and -r was to disable it. Now the default is not to do -x
so this option is a no-op.
-m parent-number, --mainline parent-number
Usually you cannot cherry-pick a merge because you do not know
which side of the merge should be considered the mainline. This
option specifies the parent number (starting from 1) of the
mainline and allows cherry-pick to replay the change relative to
the specified parent.
-n, --no-commit
Usually the command automatically creates a sequence of commits.
This flag applies the changes necessary to cherry-pick each named
commit to your working tree and the index, without making any
commit. In addition, when this option is used, your index does
not have to match the HEAD commit. The cherry-pick is done
against the beginning state of your index.
This is useful when cherry-picking more than one commits' effect
to your index in a row.
-s, --signoff
Add Signed-off-by line at the end of the commit message. See the
signoff option in git-commit(1) for more information.
-S[<keyid>], --gpg-sign[=<keyid>]
GPG-sign commits. The keyid argument is optional and defaults to
the committer identity; if specified, it must be stuck to the
option without a space.
--ff
If the current HEAD is the same as the parent of the
cherry-pick’ed commit, then a fast forward to this commit will be
performed.
--allow-empty
By default, cherry-picking an empty commit will fail, indicating
that an explicit invocation of git commit --allow-empty is
required. This option overrides that behavior, allowing empty
commits to be preserved automatically in a cherry-pick. Note that
when "--ff" is in effect, empty commits that meet the
"fast-forward" requirement will be kept even without this option.
Note also, that use of this option only keeps commits that were
initially empty (i.e. the commit recorded the same tree as its
parent). Commits which are made empty due to a previous commit
are dropped. To force the inclusion of those commits use
--keep-redundant-commits.
--allow-empty-message
By default, cherry-picking a commit with an empty message will
fail. This option overrides that behavior, allowing commits with
empty messages to be cherry picked.
--keep-redundant-commits
If a commit being cherry picked duplicates a commit already in
the current history, it will become empty. By default these
redundant commits cause cherry-pick to stop so the user can
examine the commit. This option overrides that behavior and
creates an empty commit object. Implies --allow-empty.
--strategy=<strategy>
Use the given merge strategy. Should only be used once. See the
MERGE STRATEGIES section in git-merge(1) for details.
-X<option>, --strategy-option=<option>
Pass the merge strategy-specific option through to the merge
strategy. See git-merge(1) for details.
--continue
Continue the operation in progress using the information in
.git/sequencer. Can be used to continue after resolving conflicts
in a failed cherry-pick or revert.
--quit
Forget about the current operation in progress. Can be used to
clear the sequencer state after a failed cherry-pick or revert.
--abort
Cancel the operation and return to the pre-sequence state.
git cherry-pick master
Apply the change introduced by the commit at the tip of the
master branch and create a new commit with this change.
git cherry-pick ..master, git cherry-pick ^HEAD master
Apply the changes introduced by all commits that are ancestors of
master but not of HEAD to produce new commits.
git cherry-pick maint next ^master, git cherry-pick maint
master..next
Apply the changes introduced by all commits that are ancestors of
maint or next, but not master or any of its ancestors. Note that
the latter does not mean maint and everything between master and
next; specifically, maint will not be used if it is included in
master.
git cherry-pick master~4 master~2
Apply the changes introduced by the fifth and third last commits
pointed to by master and create 2 new commits with these changes.
git cherry-pick -n master~1 next
Apply to the working tree and the index the changes introduced by
the second last commit pointed to by master and by the last
commit pointed to by next, but do not create any commit with
these changes.
git cherry-pick --ff ..next
If history is linear and HEAD is an ancestor of next, update the
working tree and advance the HEAD pointer to match next.
Otherwise, apply the changes introduced by those commits that are
in next but not HEAD to the current branch, creating a new commit
for each new change.
git rev-list --reverse master -- README | git cherry-pick -n --stdin
Apply the changes introduced by all commits on the master branch
that touched README to the working tree and index, so the result
can be inspected and made into a single new commit if suitable.
The following sequence attempts to backport a patch, bails out
because the code the patch applies to has changed too much, and then
tries again, this time exercising more care about matching up context
lines.
$ git cherry-pick topic^ (1)
$ git diff (2)
$ git reset --merge ORIG_HEAD (3)
$ git cherry-pick -Xpatience topic^ (4)
1. apply the change that would be shown by git show topic^. In this
example, the patch does not apply cleanly, so information about the
conflict is written to the index and working tree and no new commit
results.
2. summarize changes to be reconciled
3. cancel the cherry-pick. In other words, return to the
pre-cherry-pick state, preserving any local modifications you had in
the working tree.
4. try to apply the change introduced by topic^ again, spending extra
time to avoid mistakes based on incorrectly matching context lines.
git-revert(1)
Part of the git(1) suite
This page is part of the git (Git distributed version control system)
project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual page,
see ⟨http://git-scm.com/community⟩. This page was obtained from the
project's upstream Git repository ⟨https://github.com/git/git.git⟩ on
2018-02-02. (At that time, the date of the most recent commit that
was found in the repository was 2018-01-23.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.9.2.277.g2949358 07/16/2016 GIT-CHERRY-PICK(1)
Pages that refer to this page: git(1), git-cherry(1), git-revert(1), gitworkflows(7)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|