|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | PACKAGE SELECTIONS MANAGEMENT | EXIT STATUS | ENVIRONMENT | BUGS | SEE ALSO | COLOPHON |
|
dselect(1) dpkg suite dselect(1)
dselect - Debian package management frontend
dselect [option...] [command...]
dselect is one of the primary user interfaces for managing packages
on a Debian system. At the dselect main menu, the system
administrator can:
- Update the list of available package versions,
- View the status of installed and available packages,
- Alter package selections and manage dependencies,
- Install new packages or upgrade to newer versions.
dselect operates as a front-end to dpkg(1), the low-level debian
package handling tool. It features a full-screen package selections
manager with package depends and conflicts resolver. When run with
administrator privileges, packages can be installed, upgraded and
removed. Various access methods can be configured to retrieve
available package version information and installable packages from
package repositories. Depending on the used access method, these
repositories can be public archive servers on the internet, local
archive servers or cdroms. The recommended access method is apt,
which is provided by the package apt.
Normally dselect is invoked without parameters. An interactive menu
is presented, offering the user a list of commands. If a command is
given as argument, then that command is started immediately. Several
command line parameters are still available to modify the running
behaviour of dselect or show additional information about the
program.
All options can be specified both on the command line and in the
dselect configuration file /usr/local/etc/dpkg/dselect.cfg or the
files on the configuration directory
/usr/local/etc/dpkg/dselect.cfg.d/. Each line in the configuration
file is either an option (exactly the same as the command line option
but without leading hyphens) or a comment (if it starts with a ‘#’).
--admindir directory
Changes the directory where the dpkg ‘status’, ‘available’ and
similar files are located. This defaults to
/usr/local/var/lib/dpkg and normally there shouldn't be any
need to change it.
-Dfile, --debug file
Turn on debugging. Debugging information is sent to file.
--expert
Turns on expert mode, i.e. doesn't display possibly annoying
help messages.
--colour|--color
screenpart:[foreground],[background][:attr[+attr]...]
Configures screen colors. This works only if your display
supports colors. This option may be used multiple times (and
is best used in dselect.cfg). Each use changes the color (and
optionally, other attributes) of one part of the screen. The
parts of the screen (from top to bottom) are:
title The screen title.
listhead
The header line above the list of packages.
list The scrolling list of packages (and also some help
text).
listsel
The selected item in the list.
pkgstate
In the list of packages, the text indicating the
current state of each package.
pkgstatesel
In the list of packages, the text indicating the
current state of the currently selected package.
infohead
The header line that displays the state of the
currently selected package.
infodesc
The package's short description.
info Used to display package info such as the package's
description.
infofoot
The last line of the screen when selecting packages.
query Used to display query lines
helpscreen
Color of help screens.
After the part of the screen comes a colon and the color
specification. You can specify either the foreground color,
the background color, or both, overriding the compiled-in
colors. Use standard curses color names.
Optionally, after the color specification is another colon,
and an attribute specification. This is a list of one or more
attributes, separated by plus (‘+’) characters. Available
attributes include (not all of these will work on all
terminals): normal, standout, underline, reverse, blink,
bright, dim, bold
-?, --help
Print a brief help text and exit successfully.
--version
Print version information and exit successfully.
When dselect is started it can perform the following commands, either
directly if it was specified on the command line or by prompting the
user with a menu of available commands if running interactively:
access
Choose and configure an access method to access package repositories.
By default, dselect provides several methods such as cdrom, multi_cd,
nfs, multi_nfs, harddisk, mounted, multi_mount, floppy or ftp, but
other packages may provide additional methods, eg. the apt access
method provided by the apt package.
The use of the apt access method is strongly recommended.
update
Refresh the available packages database.
Retrieves a list of available package versions from the package
repository, configured for the current access method, and update the
dpkg database. The package lists are commonly provided by the
repository as files named Packages or Packages.gz. These files can
be generated by repository maintainers, using the program
dpkg-scanpackages(1).
Details of the update command depend on the access method's
implementation. Normally the process is straightforward and requires
no user interaction.
select
View or manage package selections and dependencies.
This is the main function of dselect. In the select screen, the user
can review a list of all available and installed packages. When run
with administrator privileges, it is also possible to interactively
change packages selection state. dselect tracks the implications of
these changes to other depending or conflicting packages.
When a conflict or failed depends is detected, a dependency
resolution subscreen is prompted to the user. In this screen, a list
of conflicting or depending packages is shown, and for each package
listed, the reason for its listing is shown. The user may apply the
suggestions proposed by dselect, override them, or back out all the
changes, including the ones that created the unresolved depends or
conflicts.
The use of the interactive package selections management screen is
explained in more detail below.
install
Installs selected packages.
The configured access method will fetch installable or upgradable
packages from the relevant repositories and install these using dpkg.
Depending on the implementation of the access method, all packages
can be prefetched before installation, or fetched when needed. Some
access methods may also remove packages that were marked for removal.
If an error occurred during install, it is usually advisable to run
install again. In most cases, the problems will disappear or be
solved. If problems persist or the installation performed was
incorrect, please investigate into the causes and circumstances, and
file a bug in the Debian bug tracking system. Instructions on how to
do this can be found at https://bugs.debian.org/ or by reading the
documentation for bug(1) or reportbug(1), if these are installed.
Details of the install command depend on the access method's
implementation. The user's attention and input may be required
during installation, configuration or removal of packages. This
depends on the maintainer scripts in the package. Some packages make
use of the debconf(1) library, allowing for more flexible or even
automated installation setups.
config
Configures any previously installed, but not fully configured
packages.
remove
Removes or purges installed packages, that are marked for removal.
quit
Quit dselect.
Exits the program with zero (successful) errorcode.
Introduction
dselect directly exposes the administrator to some of the
complexities involved with managing large sets of packages with many
interdependencies. For a user who is unfamiliar with the concepts and
the ways of the debian package management system, it can be quite
overwhelming. Although dselect is aimed at easing package management
and administration, it is only instrumental in doing so and cannot be
assumed to be a sufficient substitute for administrator skill and
understanding. The user is required to be familiar with the concepts
underlying the Debian packaging system. In case of doubt, consult
the dpkg(1) manpage and the distribution policy.
Unless dselect is run in expert or immediate mode, a help screen is
first displayed when choosing this command from the menu. The user is
strongly advised to study all of the information presented in the
online help screens, when one pops up. The online help screens can
at any time be invoked with the ‘?’ key.
Screen layout
The select screen is by default split in a top and a bottom half.
The top half shows a list of packages. A cursor bar can select an
individual package, or a group of packages, if applicable, by
selecting the group header. The bottom half of the screen shows some
details about the package currently selected in the top half of the
screen. The type of detail that is displayed can be varied.
Pressing the ‘I’ key toggles a full-screen display of the packages
list, an enlarged view of the package details, or the equally split
screen.
Package details view
The package details view by default shows the extended package
description for the package that is currently selected in the
packages status list. The type of detail can be toggled by pressing
the ‘i’ key. This alternates between:
- the extended description
- the control information for the installed version
- the control information for the available version
In a dependency resolution screen, there is also the possibility of
viewing the specific unresolved depends or conflicts related to the
package and causing it to be listed.
Packages status list
The main select screen displays a list of all packages known to the
debian package management system. This includes packages installed on
the system and packages known from the available packages database.
For every package, the list shows the package's status, priority,
section, installed and available architecture, installed and
available versions, the package name and its short description, all
in one line. By pressing the ‘A’ key, the display of the installed
and available architecture can be toggled between on an off. By
pressing the ‘V’ key, the display of the installed and available
version can be toggled between on an off. By pressing the ‘v’ key,
the package status display is toggled between verbose and shorthand.
Shorthand display is the default.
The shorthand status indication consists of four parts: an error
flag, which should normally be clear, the current status, the last
selection state and the current selection state. The first two
relate to the actual state of the package, the second pair are about
the selections set by the user.
These are the meanings of the shorthand package status indicator
codes:
Error flag:
empty no error
R serious error, needs reinstallation;
Installed state:
empty not installed;
* fully installed and configured;
- not installed but some config files may remain;
U unpacked but not yet configured;
C half-configured (an error happened);
I half-installed (an error happened).
Current and requested selections:
* marked for installation or upgrade;
- marked for removal, configuration files remain;
= on hold: package will not be processed at all;
_ marked for purge, also remove configuration;
n package is new and has yet to be marked.
Cursor and screen movement
The package selection list and the dependency conflict resolution
screens can be navigated using motion commands mapped to the
following keys:
p, Up, k move cursor bar up
n, Down, j move cursor bar down
P, Pgup, Backspace scroll list 1 page up
N, Pgdn, Space scroll list 1 page down
^p scroll list 1 line up
^n scroll list 1 line down
t, Home jump to top of list
e, End jump to end of list
u scroll info 1 page up
d scroll info 1 page down
^u scroll info 1 line up
^d scroll info 1 line down
B, Left-arrow pan display 1/3 screen left
F, Right-arrow pan display 1/3 screen right
^b pan display 1 character left
^f pan display 1 character right
Searching and sorting
The list of packages can be searched by package name. This is done by
pressing ‘/’, and typing a simple search string. The string is
interpreted as a regex(7) regular expression. If you add ‘/d’ to the
search expression, dselect will also search in descriptions. If you
add ‘/i’ the search will be case insensitive. You may combine these
two suffixes like this: ‘/id’. Repeated searching is accomplished by
repeatedly pressing the ‘n’ or ‘\’ keys, until the wanted package is
found. If the search reaches the bottom of the list, it wraps to the
top and continues searching from there.
The list sort order can be varied by pressing the ‘o’ and ‘O’ keys
repeatedly. The following nine sort orderings can be selected:
alphabet available status
priority+section available+priority status+priority
section+priority available+section status+section
Where not listed above explicitly, alphabetic order is used as the
final subordering sort key.
Altering selections
The requested selection state of individual packages may be altered
with the following commands:
+, Insert install or upgrade
=, H hold in present state and version
:, G unhold: upgrade or leave uninstalled
-, Delete remove, but leave configuration
_ remove & purge configuration
When the change request results in one or more unsatisfied depends or
conflicts, dselect prompts the user with a dependency resolution
screen. This will be further explained below.
It is also possible to apply these commands to groups of package
selections, by pointing the cursor bar onto a group header. The exact
grouping of packages is dependent on the current list ordering
settings.
Proper care should be taken when altering large groups of selections,
because this can instantaneously create large numbers of unresolved
depends or conflicts, all of which will be listed in one dependency
resolution screen, making them very hard to handle. In practice, only
hold and unhold operations are useful when applied to groups.
Resolving depends and conflicts
When the change request results in one or more unsatisfied depends or
conflicts, dselect prompts the user with a dependency resolution
screen. First however, an informative help screen is displayed.
The top half of this screen lists all the packages that will have
unresolved depends or conflicts, as a result of the requested change,
and all the packages whose installation can resolve any of these
depends or whose removal can resolve any of the conflicts. The
bottom half defaults to show the depends or conflicts that cause the
currently selected package to be listed.
When the sublist of packages is displayed initially, dselect may have
already set the requested selection status of some of the listed
packages, in order to resolve the depends or conflicts that caused
the dependency resolution screen to be displayed. Usually, it is best
to follow up the suggestions made by dselect.
The listed packages' selection state may be reverted to the original
settings, as they were before the unresolved depends or conflicts
were created, by pressing the ‘R’ key. By pressing the ‘D’ key, the
automatic suggestions are reset, but the change that caused the
dependency resolution screen to be prompted is kept as requested.
Finally, by pressing ‘U’, the selections are again set to the
automatic suggestion values.
Establishing the requested selections
By pressing enter, the currently displayed set of selections is
accepted. If dselect detects no unresolved depends as a result of the
requested selections, the new selections will be set. However, if
there are any unresolved depends, dselect will again prompt the user
with a dependency resolution screen.
To alter a set of selections that creates unresolved depends or
conflicts and forcing dselect to accept it, press the ‘Q’ key. This
sets the selections as specified by the user, unconditionally.
Generally, don't do this unless you've read the fine print.
The opposite effect, to back out any selections change requests and
go back to the previous list of selections, is attained by pressing
the ‘X’ or escape keys. By repeatedly pressing these keys, any
possibly detrimental changes to the requested package selections can
be backed out completely to the last established settings.
If you mistakenly establish some settings and wish to revert all the
selections to what is currently installed on the system, press the
‘C’ key. This is somewhat similar to using the unhold command on all
packages, but provides a more obvious panic button in cases where the
user pressed enter by accident.
0 The requested command was successfully performed.
2 Fatal or unrecoverable error due to invalid command-line
usage, or interactions with the system, such as accesses to
the database, memory allocations, etc.
HOME If set, dselect will use it as the directory from which to
read the user specific configuration file.
The dselect package selection interface is confusing to some new
users. Reportedly, it even makes seasoned kernel developers cry.
The documentation is lacking.
There is no help option in the main menu.
The visible list of available packages cannot be reduced.
The built in access methods can no longer stand up to current quality
standards. Use the access method provided by apt, it is not only not
broken, it is also much more flexible than the built in access
methods.
dpkg(1), apt-get(8), sources.list(5), deb(5).
This page is part of the dpkg (Debian Package Manager) project.
Information about the project can be found at
⟨https://wiki.debian.org/Teams/Dpkg/⟩. If you have a bug report for
this manual page, see
⟨http://bugs.debian.org/cgi-bin/pkgreport.cgi?src=dpkg⟩. This page
was obtained from the project's upstream Git repository
⟨git://git.debian.org/git/dpkg/dpkg.git⟩ on 2018-02-02. (At that
time, the date of the most recent commit that was found in the repos‐
itory was 2018-01-16.) If you discover any rendering problems in
this HTML version of the page, or you believe there is a better or
more up-to-date source for the page, or you have corrections or
improvements to the information in this COLOPHON (which is not part
of the original manual page), send a mail to man-pages@man7.org
1.18.15-3-ga2ef 1970-01-01 dselect(1)
Pages that refer to this page: dpkg(1), dpkg-deb(1), dpkg-name(1), dpkg-scanpackages(1), dselect.cfg(5)
|
HTML rendering created 2018-02-02 by Michael Kerrisk, author of The Linux Programming Interface, maintainer of the Linux man-pages project. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH.
|
|