/* * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * * See file CREDITS for list of people who contributed to this * project. */ /** * Defines the SDRAM parameter structure. * * Note that PLLM is used by EMC. */ #ifndef INCLUDED_NVBOOT_SDRAM_PARAM_T210_H #define INCLUDED_NVBOOT_SDRAM_PARAM_T210_H #define NVBOOT_BCT_SDRAM_ARB_CONFIG_WORDS 27 typedef enum { /* Specifies the memory type to be undefined */ nvboot_memory_type_none = 0, /* Specifies the memory type to be DDR SDRAM */ nvboot_memory_type_ddr = 0, /* Specifies the memory type to be LPDDR SDRAM */ nvboot_memory_type_lpddr = 0, /* Specifies the memory type to be DDR2 SDRAM */ nvboot_memory_type_ddr2 = 0, /* Specifies the memory type to be LPDDR2 SDRAM */ nvboot_memory_type_lpddr2, /* Specifies the memory type to be DDR3 SDRAM */ nvboot_memory_type_ddr3, /* Specifies the memory type to be LPDDR4 SDRAM */ nvboot_memory_type_lpddr4, nvboot_memory_type_num, nvboot_memory_type_force32 = 0x7FFFFFF } nvboot_memory_type; /** * Defines the SDRAM parameter structure */ typedef struct nvboot_sdram_params_rec { /* sdram data structure generated by tool warmboot_code_gen */ /* Specifies the type of memory device */ nvboot_memory_type memory_type; /* MC/EMC clock source configuration */ /* Specifies the M value for PllM */ u_int32_t pllm_input_divider; /* Specifies the N value for PllM */ u_int32_t pllm_feedback_divider; /* Specifies the time to wait for PLLM to lock (in microseconds) */ u_int32_t pllm_stable_time; /* Specifies misc. control bits */ u_int32_t pllm_setup_control; /* Specifies the P value for PLLM */ u_int32_t pllm_post_divider; /* Specifies value for Charge Pump Gain Control */ u_int32_t pllm_kcp; /* Specifies VCO gain */ u_int32_t pllm_kvco; /* Spare BCT param */ u_int32_t emc_bct_spare0; /* Spare BCT param */ u_int32_t emc_bct_spare1; /* Spare BCT param */ u_int32_t emc_bct_spare2; /* Spare BCT param */ u_int32_t emc_bct_spare3; /* Spare BCT param */ u_int32_t emc_bct_spare4; /* Spare BCT param */ u_int32_t emc_bct_spare5; /* Spare BCT param */ u_int32_t emc_bct_spare6; /* Spare BCT param */ u_int32_t emc_bct_spare7; /* Spare BCT param */ u_int32_t emc_bct_spare8; /* Spare BCT param */ u_int32_t emc_bct_spare9; /* Spare BCT param */ u_int32_t emc_bct_spare10; /* Spare BCT param */ u_int32_t emc_bct_spare11; /* Spare BCT param */ u_int32_t emc_bct_spare12; /* Spare BCT param */ u_int32_t emc_bct_spare13; /* Defines EMC_2X_CLK_SRC, EMC_2X_CLK_DIVISOR, EMC_INVERT_DCD */ u_int32_t emc_clock_source; u_int32_t emc_clock_source_dll; /* Defines possible override for PLLLM_MISC2 */ u_int32_t clk_rst_pllm_misc20_override; /* enables override for PLLLM_MISC2 */ u_int32_t clk_rst_pllm_misc20_override_enable; /* defines CLK_ENB_MC1 in register clk_rst_controller_clk_enb_w_clr */ u_int32_t clear_clock2_mc1; /* Auto-calibration of EMC pads */ /* Specifies the value for EMC_AUTO_CAL_INTERVAL */ u_int32_t emc_auto_cal_interval; /* * Specifies the value for EMC_AUTO_CAL_CONFIG * Note: Trigger bits are set by the SDRAM code. */ u_int32_t emc_auto_cal_config; /* Specifies the value for EMC_AUTO_CAL_CONFIG2 */ u_int32_t emc_auto_cal_config2; /* Specifies the value for EMC_AUTO_CAL_CONFIG3 */ u_int32_t emc_auto_cal_config3; u_int32_t emc_auto_cal_config4; u_int32_t emc_auto_cal_config5; u_int32_t emc_auto_cal_config6; u_int32_t emc_auto_cal_config7; u_int32_t emc_auto_cal_config8; /* Specifies the value for EMC_AUTO_CAL_VREF_SEL_0 */ u_int32_t emc_auto_cal_vref_sel0; u_int32_t emc_auto_cal_vref_sel1; /* Specifies the value for EMC_AUTO_CAL_CHANNEL */ u_int32_t emc_auto_cal_channel; /* Specifies the value for EMC_PMACRO_AUTOCAL_CFG_0 */ u_int32_t emc_pmacro_auto_cal_cfg0; u_int32_t emc_pmacro_auto_cal_cfg1; u_int32_t emc_pmacro_auto_cal_cfg2; u_int32_t emc_pmacro_rx_term; u_int32_t emc_pmacro_dq_tx_drive; u_int32_t emc_pmacro_ca_tx_drive; u_int32_t emc_pmacro_cmd_tx_drive; u_int32_t emc_pmacro_auto_cal_common; u_int32_t emc_pmacro_zcrtl; /* * Specifies the time for the calibration * to stabilize (in microseconds) */ u_int32_t emc_auto_cal_wait; u_int32_t emc_xm2_comp_pad_ctrl; u_int32_t emc_xm2_comp_pad_ctrl2; u_int32_t emc_xm2_comp_pad_ctrl3; /* * DRAM size information * Specifies the value for EMC_ADR_CFG */ u_int32_t emc_adr_cfg; /* * Specifies the time to wait after asserting pin * CKE (in microseconds) */ u_int32_t emc_pin_program_wait; /* Specifies the extra delay before/after pin RESET/CKE command */ u_int32_t emc_pin_extra_wait; u_int32_t emc_pin_gpio_enable; u_int32_t emc_pin_gpio; /* * Specifies the extra delay after the first writing * of EMC_TIMING_CONTROL */ u_int32_t emc_timing_control_wait; /* Timing parameters required for the SDRAM */ /* Specifies the value for EMC_RC */ u_int32_t emc_rc; /* Specifies the value for EMC_RFC */ u_int32_t emc_rfc; u_int32_t emc_rfc_pb; u_int32_t emc_ref_ctrl2; /* Specifies the value for EMC_RFC_SLR */ u_int32_t emc_rfc_slr; /* Specifies the value for EMC_RAS */ u_int32_t emc_ras; /* Specifies the value for EMC_RP */ u_int32_t emc_rp; /* Specifies the value for EMC_R2R */ u_int32_t emc_r2r; /* Specifies the value for EMC_W2W */ u_int32_t emc_w2w; /* Specifies the value for EMC_R2W */ u_int32_t emc_r2w; /* Specifies the value for EMC_W2R */ u_int32_t emc_w2r; /* Specifies the value for EMC_R2P */ u_int32_t emc_r2p; /* Specifies the value for EMC_W2P */ u_int32_t emc_w2p; /* Specifies the value for EMC_RD_RCD */ u_int32_t emc_tppd; u_int32_t emc_ccdmw; u_int32_t emc_rd_rcd; /* Specifies the value for EMC_WR_RCD */ u_int32_t emc_wr_rcd; /* Specifies the value for EMC_RRD */ u_int32_t emc_rrd; /* Specifies the value for EMC_REXT */ u_int32_t emc_rext; /* Specifies the value for EMC_WEXT */ u_int32_t emc_wext; /* Specifies the value for EMC_WDV */ u_int32_t emc_wdv; u_int32_t emc_wdv_chk; u_int32_t emc_wsv; u_int32_t emc_wev; /* Specifies the value for EMC_WDV_MASK */ u_int32_t emc_wdv_mask; u_int32_t emc_ws_duration; u_int32_t emc_we_duration; /* Specifies the value for EMC_QUSE */ u_int32_t emc_quse; /* Specifies the value for EMC_QUSE_WIDTH */ u_int32_t emc_quse_width; /* Specifies the value for EMC_IBDLY */ u_int32_t emc_ibdly; u_int32_t emc_obdly; /* Specifies the value for EMC_EINPUT */ u_int32_t emc_einput; /* Specifies the value for EMC_EINPUT_DURATION */ u_int32_t emc_einput_duration; /* Specifies the value for EMC_PUTERM_EXTRA */ u_int32_t emc_puterm_extra; /* Specifies the value for EMC_PUTERM_WIDTH */ u_int32_t emc_puterm_width; u_int32_t emc_qrst; u_int32_t emc_qsafe; u_int32_t emc_rdv; u_int32_t emc_rdv_mask; u_int32_t emc_rdv_early; u_int32_t emc_rdv_early_mask; /* Specifies the value for EMC_QPOP */ u_int32_t emc_qpop; /* Specifies the value for EMC_REFRESH */ u_int32_t emc_refresh; /* Specifies the value for EMC_BURST_REFRESH_NUM */ u_int32_t emc_burst_refresh_num; /* Specifies the value for EMC_PRE_REFRESH_REQ_CNT */ u_int32_t emc_prerefresh_req_cnt; /* Specifies the value for EMC_PDEX2WR */ u_int32_t emc_pdex2wr; /* Specifies the value for EMC_PDEX2RD */ u_int32_t emc_pdex2rd; /* Specifies the value for EMC_PCHG2PDEN */ u_int32_t emc_pchg2pden; /* Specifies the value for EMC_ACT2PDEN */ u_int32_t emc_act2pden; /* Specifies the value for EMC_AR2PDEN */ u_int32_t emc_ar2pden; /* Specifies the value for EMC_RW2PDEN */ u_int32_t emc_rw2pden; u_int32_t emc_cke2pden; u_int32_t emc_pdex2che; u_int32_t emc_pdex2mrr; /* Specifies the value for EMC_TXSR */ u_int32_t emc_txsr; /* Specifies the value for EMC_TXSRDLL */ u_int32_t emc_txsr_dll; /* Specifies the value for EMC_TCKE */ u_int32_t emc_tcke; /* Specifies the value for EMC_TCKESR */ u_int32_t emc_tckesr; /* Specifies the value for EMC_TPD */ u_int32_t emc_tpd; /* Specifies the value for EMC_TFAW */ u_int32_t emc_tfaw; /* Specifies the value for EMC_TRPAB */ u_int32_t emc_trpab; /* Specifies the value for EMC_TCLKSTABLE */ u_int32_t emc_tclkstable; /* Specifies the value for EMC_TCLKSTOP */ u_int32_t emc_tclkstop; /* Specifies the value for EMC_TREFBW */ u_int32_t emc_trefbw; /* FBIO configuration values */ /* Specifies the value for EMC_FBIO_CFG5 */ u_int32_t emc_fbio_cfg5; /* Specifies the value for EMC_FBIO_CFG7 */ u_int32_t emc_fbio_cfg7; u_int32_t emc_fbio_cfg8; /* Command mapping for CMD brick 0 */ u_int32_t emc_cmd_mapping_cmd0_0; u_int32_t emc_cmd_mapping_cmd0_1; u_int32_t emc_cmd_mapping_cmd0_2; u_int32_t emc_cmd_mapping_cmd1_0; u_int32_t emc_cmd_mapping_cmd1_1; u_int32_t emc_cmd_mapping_cmd1_2; u_int32_t emc_cmd_mapping_cmd2_0; u_int32_t emc_cmd_mapping_cmd2_1; u_int32_t emc_cmd_mapping_cmd2_2; u_int32_t emc_cmd_mapping_cmd3_0; u_int32_t emc_cmd_mapping_cmd3_1; u_int32_t emc_cmd_mapping_cmd3_2; u_int32_t emc_cmd_mapping_byte; /* Specifies the value for EMC_FBIO_SPARE */ u_int32_t emc_fbio_spare; /* Specifies the value for EMC_CFG_RSV */ u_int32_t emc_cfg_rsv; /* MRS command values */ /* Specifies the value for EMC_MRS */ u_int32_t emc_mrs; /* Specifies the MP0 command to initialize mode registers */ u_int32_t emc_emrs; /* Specifies the MP2 command to initialize mode registers */ u_int32_t emc_emrs2; /* Specifies the MP3 command to initialize mode registers */ u_int32_t emc_emrs3; /* Specifies the programming to LPDDR2 Mode Register 1 at cold boot */ u_int32_t emc_mrw1; /* Specifies the programming to LPDDR2 Mode Register 2 at cold boot */ u_int32_t emc_mrw2; /* Specifies the programming to LPDDR2 Mode Register 3 at cold boot */ u_int32_t emc_mrw3; /* Specifies the programming to LPDDR2 Mode Register 11 at cold boot */ u_int32_t emc_mrw4; /* Specifies the programming to LPDDR4 Mode Register 3 at cold boot */ u_int32_t emc_mrw6; /* Specifies the programming to LPDDR4 Mode Register 11 at cold boot */ u_int32_t emc_mrw8; /* Specifies the programming to LPDDR4 Mode Register 11 at cold boot */ u_int32_t emc_mrw9; /* Specifies the programming to LPDDR4 Mode Register 12 at cold boot */ u_int32_t emc_mrw10; /* Specifies the programming to LPDDR4 Mode Register 14 at cold boot */ u_int32_t emc_mrw12; /* Specifies the programming to LPDDR4 Mode Register 14 at cold boot */ u_int32_t emc_mrw13; /* Specifies the programming to LPDDR4 Mode Register 22 at cold boot */ u_int32_t emc_mrw14; /* * Specifies the programming to extra LPDDR2 Mode Register * at cold boot */ u_int32_t emc_mrw_extra; /* * Specifies the programming to extra LPDDR2 Mode Register * at warm boot */ u_int32_t emc_warm_boot_mrw_extra; /* * Specify the enable of extra Mode Register programming at * warm boot */ u_int32_t emc_warm_boot_extramode_reg_write_enable; /* * Specify the enable of extra Mode Register programming at * cold boot */ u_int32_t emc_extramode_reg_write_enable; /* Specifies the EMC_MRW reset command value */ u_int32_t emc_mrw_reset_command; /* Specifies the EMC Reset wait time (in microseconds) */ u_int32_t emc_mrw_reset_ninit_wait; /* Specifies the value for EMC_MRS_WAIT_CNT */ u_int32_t emc_mrs_wait_cnt; /* Specifies the value for EMC_MRS_WAIT_CNT2 */ u_int32_t emc_mrs_wait_cnt2; /* EMC miscellaneous configurations */ /* Specifies the value for EMC_CFG */ u_int32_t emc_cfg; /* Specifies the value for EMC_CFG_2 */ u_int32_t emc_cfg2; /* Specifies the pipe bypass controls */ u_int32_t emc_cfg_pipe; u_int32_t emc_cfg_pipe_clk; u_int32_t emc_fdpd_ctrl_cmd_no_ramp; u_int32_t emc_cfg_update; /* Specifies the value for EMC_DBG */ u_int32_t emc_dbg; u_int32_t emc_dbg_write_mux; /* Specifies the value for EMC_CMDQ */ u_int32_t emc_cmd_q; /* Specifies the value for EMC_MC2EMCQ */ u_int32_t emc_mc2emc_q; /* Specifies the value for EMC_DYN_SELF_REF_CONTROL */ u_int32_t emc_dyn_self_ref_control; /* Specifies the value for MEM_INIT_DONE */ u_int32_t ahb_arbitration_xbar_ctrl_meminit_done; /* Specifies the value for EMC_CFG_DIG_DLL */ u_int32_t emc_cfg_dig_dll; u_int32_t emc_cfg_dig_dll_1; /* Specifies the value for EMC_CFG_DIG_DLL_PERIOD */ u_int32_t emc_cfg_dig_dll_period; /* Specifies the value of *DEV_SELECTN of various EMC registers */ u_int32_t emc_dev_select; /* Specifies the value for EMC_SEL_DPD_CTRL */ u_int32_t emc_sel_dpd_ctrl; /* Pads trimmer delays */ u_int32_t emc_fdpd_ctrl_dq; u_int32_t emc_fdpd_ctrl_cmd; u_int32_t emc_pmacro_ib_vref_dq_0; u_int32_t emc_pmacro_ib_vref_dq_1; u_int32_t emc_pmacro_ib_vref_dqs_0; u_int32_t emc_pmacro_ib_vref_dqs_1; u_int32_t emc_pmacro_ib_rxrt; u_int32_t emc_cfg_pipe1; u_int32_t emc_cfg_pipe2; /* Specifies the value for EMC_PMACRO_QUSE_DDLL_RANK0_0 */ u_int32_t emc_pmacro_quse_ddll_rank0_0; u_int32_t emc_pmacro_quse_ddll_rank0_1; u_int32_t emc_pmacro_quse_ddll_rank0_2; u_int32_t emc_pmacro_quse_ddll_rank0_3; u_int32_t emc_pmacro_quse_ddll_rank0_4; u_int32_t emc_pmacro_quse_ddll_rank0_5; u_int32_t emc_pmacro_quse_ddll_rank1_0; u_int32_t emc_pmacro_quse_ddll_rank1_1; u_int32_t emc_pmacro_quse_ddll_rank1_2; u_int32_t emc_pmacro_quse_ddll_rank1_3; u_int32_t emc_pmacro_quse_ddll_rank1_4; u_int32_t emc_pmacro_quse_ddll_rank1_5; u_int32_t emc_pmacro_ob_ddll_long_dq_rank0_0; u_int32_t emc_pmacro_ob_ddll_long_dq_rank0_1; u_int32_t emc_pmacro_ob_ddll_long_dq_rank0_2; u_int32_t emc_pmacro_ob_ddll_long_dq_rank0_3; u_int32_t emc_pmacro_ob_ddll_long_dq_rank0_4; u_int32_t emc_pmacro_ob_ddll_long_dq_rank0_5; u_int32_t emc_pmacro_ob_ddll_long_dq_rank1_0; u_int32_t emc_pmacro_ob_ddll_long_dq_rank1_1; u_int32_t emc_pmacro_ob_ddll_long_dq_rank1_2; u_int32_t emc_pmacro_ob_ddll_long_dq_rank1_3; u_int32_t emc_pmacro_ob_ddll_long_dq_rank1_4; u_int32_t emc_pmacro_ob_ddll_long_dq_rank1_5; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank0_0; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank0_1; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank0_2; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank0_3; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank0_4; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank0_5; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank1_0; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank1_1; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank1_2; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank1_3; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank1_4; u_int32_t emc_pmacro_ob_ddll_long_dqs_rank1_5; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank0_0; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank0_1; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank0_2; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank0_3; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank1_0; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank1_1; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank1_2; u_int32_t emc_pmacro_ib_ddll_long_dqs_rank1_3; u_int32_t emc_pmacro_ddll_long_cmd_0; u_int32_t emc_pmacro_ddll_long_cmd_1; u_int32_t emc_pmacro_ddll_long_cmd_2; u_int32_t emc_pmacro_ddll_long_cmd_3; u_int32_t emc_pmacro_ddll_long_cmd_4; u_int32_t emc_pmacro_ddll_short_cmd_0; u_int32_t emc_pmacro_ddll_short_cmd_1; u_int32_t emc_pmacro_ddll_short_cmd_2; /* * Specifies the delay after asserting CKE pin during a WarmBoot0 * sequence (in microseconds) */ u_int32_t warm_boot_wait; /* Specifies the value for EMC_ODT_WRITE */ u_int32_t emc_odt_write; /* Periodic ZQ calibration */ /* * Specifies the value for EMC_ZCAL_INTERVAL * Value 0 disables ZQ calibration */ u_int32_t emc_zcal_interval; /* Specifies the value for EMC_ZCAL_WAIT_CNT */ u_int32_t emc_zcal_wait_cnt; /* Specifies the value for EMC_ZCAL_MRW_CMD */ u_int32_t emc_zcal_mrw_cmd; /* DRAM initialization sequence flow control */ /* Specifies the MRS command value for resetting DLL */ u_int32_t emc_mrs_reset_dll; /* Specifies the command for ZQ initialization of device 0 */ u_int32_t emc_zcal_init_dev0; /* Specifies the command for ZQ initialization of device 1 */ u_int32_t emc_zcal_init_dev1; /* * Specifies the wait time after programming a ZQ initialization * command (in microseconds) */ u_int32_t emc_zcal_init_wait; /* * Specifies the enable for ZQ calibration at cold boot [bit 0] * and warm boot [bit 1] */ u_int32_t emc_zcal_warm_cold_boot_enables; /* * Specifies the MRW command to LPDDR2 for ZQ calibration * on warmboot */ /* Is issued to both devices separately */ u_int32_t emc_mrw_lpddr2zcal_warm_boot; /* * Specifies the ZQ command to DDR3 for ZQ calibration on warmboot * Is issued to both devices separately */ u_int32_t emc_zqcal_ddr3_warm_boot; u_int32_t emc_zqcal_lpddr4_warm_boot; /* * Specifies the wait time for ZQ calibration on warmboot * (in microseconds) */ u_int32_t emc_zcal_warm_boot_wait; /* * Specifies the enable for DRAM Mode Register programming * at warm boot */ u_int32_t emc_mrs_warm_boot_enable; /* * Specifies the wait time after sending an MRS DLL reset command * in microseconds) */ u_int32_t emc_mrs_reset_dll_wait; /* Specifies the extra MRS command to initialize mode registers */ u_int32_t emc_mrs_extra; /* Specifies the extra MRS command at warm boot */ u_int32_t emc_warm_boot_mrs_extra; /* Specifies the EMRS command to enable the DDR2 DLL */ u_int32_t emc_emrs_ddr2_dll_enable; /* Specifies the MRS command to reset the DDR2 DLL */ u_int32_t emc_mrs_ddr2_dll_reset; /* Specifies the EMRS command to set OCD calibration */ u_int32_t emc_emrs_ddr2_ocd_calib; /* * Specifies the wait between initializing DDR and setting OCD * calibration (in microseconds) */ u_int32_t emc_ddr2_wait; /* Specifies the value for EMC_CLKEN_OVERRIDE */ u_int32_t emc_clken_override; /* * Specifies LOG2 of the extra refresh numbers after booting * Program 0 to disable */ u_int32_t emc_extra_refresh_num; /* Specifies the master override for all EMC clocks */ u_int32_t emc_clken_override_allwarm_boot; /* Specifies the master override for all MC clocks */ u_int32_t mc_clken_override_allwarm_boot; /* Specifies digital dll period, choosing between 4 to 64 ms */ u_int32_t emc_cfg_dig_dll_period_warm_boot; /* Pad controls */ /* Specifies the value for PMC_VDDP_SEL */ u_int32_t pmc_vddp_sel; /* Specifies the wait time after programming PMC_VDDP_SEL */ u_int32_t pmc_vddp_sel_wait; /* Specifies the value for PMC_DDR_PWR */ u_int32_t pmc_ddr_pwr; /* Specifies the value for PMC_DDR_CFG */ u_int32_t pmc_ddr_cfg; /* Specifies the value for PMC_IO_DPD3_REQ */ u_int32_t pmc_io_dpd3_req; /* Specifies the wait time after programming PMC_IO_DPD3_REQ */ u_int32_t pmc_io_dpd3_req_wait; u_int32_t pmc_io_dpd4_req_wait; /* Specifies the value for PMC_REG_SHORT */ u_int32_t pmc_reg_short; /* Specifies the value for PMC_NO_IOPOWER */ u_int32_t pmc_no_io_power; u_int32_t pmc_ddr_ctrl_wait; u_int32_t pmc_ddr_ctrl; /* Specifies the value for EMC_ACPD_CONTROL */ u_int32_t emc_acpd_control; /* Specifies the value for EMC_SWIZZLE_RANK0_BYTE0 */ u_int32_t emc_swizzle_rank0_byte0; /* Specifies the value for EMC_SWIZZLE_RANK0_BYTE1 */ u_int32_t emc_swizzle_rank0_byte1; /* Specifies the value for EMC_SWIZZLE_RANK0_BYTE2 */ u_int32_t emc_swizzle_rank0_byte2; /* Specifies the value for EMC_SWIZZLE_RANK0_BYTE3 */ u_int32_t emc_swizzle_rank0_byte3; /* Specifies the value for EMC_SWIZZLE_RANK1_BYTE0 */ u_int32_t emc_swizzle_rank1_byte0; /* Specifies the value for EMC_SWIZZLE_RANK1_BYTE1 */ u_int32_t emc_swizzle_rank1_byte1; /* Specifies the value for EMC_SWIZZLE_RANK1_BYTE2 */ u_int32_t emc_swizzle_rank1_byte2; /* Specifies the value for EMC_SWIZZLE_RANK1_BYTE3 */ u_int32_t emc_swizzle_rank1_byte3; /* Specifies the value for EMC_TXDSRVTTGEN */ u_int32_t emc_txdsrvttgen; /* Specifies the value for EMC_DATA_BRLSHFT_0 */ u_int32_t emc_data_brlshft0; u_int32_t emc_data_brlshft1; u_int32_t emc_dqs_brlshft0; u_int32_t emc_dqs_brlshft1; u_int32_t emc_cmd_brlshft0; u_int32_t emc_cmd_brlshft1; u_int32_t emc_cmd_brlshft2; u_int32_t emc_cmd_brlshft3; u_int32_t emc_quse_brlshft0; u_int32_t emc_quse_brlshft1; u_int32_t emc_quse_brlshft2; u_int32_t emc_quse_brlshft3; u_int32_t emc_dll_cfg0; u_int32_t emc_dll_cfg1; u_int32_t emc_pmc_scratch1; u_int32_t emc_pmc_scratch2; u_int32_t emc_pmc_scratch3; u_int32_t emc_pmacro_pad_cfg_ctrl; u_int32_t emc_pmacro_vttgen_ctrl0; u_int32_t emc_pmacro_vttgen_ctrl1; u_int32_t emc_pmacro_vttgen_ctrl2; u_int32_t emc_pmacro_brick_ctrl_rfu1; u_int32_t emc_pmacro_cmd_brick_ctrl_fdpd; u_int32_t emc_pmacro_brick_ctrl_rfu2; u_int32_t emc_pmacro_data_brick_ctrl_fdpd; u_int32_t emc_pmacro_bg_bias_ctrl0; u_int32_t emc_pmacro_data_pad_rx_ctrl; u_int32_t emc_pmacro_cmd_pad_rx_ctrl; u_int32_t emc_pmacro_data_rx_term_mode; u_int32_t emc_pmacro_cmd_rx_term_mode; u_int32_t emc_pmacro_data_pad_tx_ctrl; u_int32_t emc_pmacro_common_pad_tx_ctrl; u_int32_t emc_pmacro_cmd_pad_tx_ctrl; u_int32_t emc_cfg3; u_int32_t emc_pmacro_tx_pwrd0; u_int32_t emc_pmacro_tx_pwrd1; u_int32_t emc_pmacro_tx_pwrd2; u_int32_t emc_pmacro_tx_pwrd3; u_int32_t emc_pmacro_tx_pwrd4; u_int32_t emc_pmacro_tx_pwrd5; u_int32_t emc_config_sample_delay; u_int32_t emc_pmacro_brick_mapping0; u_int32_t emc_pmacro_brick_mapping1; u_int32_t emc_pmacro_brick_mapping2; u_int32_t emc_pmacro_tx_sel_clk_src0; u_int32_t emc_pmacro_tx_sel_clk_src1; u_int32_t emc_pmacro_tx_sel_clk_src2; u_int32_t emc_pmacro_tx_sel_clk_src3; u_int32_t emc_pmacro_tx_sel_clk_src4; u_int32_t emc_pmacro_tx_sel_clk_src5; u_int32_t emc_pmacro_ddll_bypass; u_int32_t emc_pmacro_ddll_pwrd0; u_int32_t emc_pmacro_ddll_pwrd1; u_int32_t emc_pmacro_ddll_pwrd2; u_int32_t emc_pmacro_cmd_ctrl0; u_int32_t emc_pmacro_cmd_ctrl1; u_int32_t emc_pmacro_cmd_ctrl2; /* DRAM size information */ /* Specifies the value for MC_EMEM_ADR_CFG */ u_int32_t mc_emem_adr_cfg; /* Specifies the value for MC_EMEM_ADR_CFG_DEV0 */ u_int32_t mc_emem_adr_cfg_dev0; /* Specifies the value for MC_EMEM_ADR_CFG_DEV1 */ u_int32_t mc_emem_adr_cfg_dev1; u_int32_t mc_emem_adr_cfg_channel_mask; /* Specifies the value for MC_EMEM_BANK_SWIZZLE_CFG0 */ u_int32_t mc_emem_adr_cfg_bank_mask0; /* Specifies the value for MC_EMEM_BANK_SWIZZLE_CFG1 */ u_int32_t mc_emem_adr_cfg_bank_mask1; /* Specifies the value for MC_EMEM_BANK_SWIZZLE_CFG2 */ u_int32_t mc_emem_adr_cfg_bank_mask2; /* * Specifies the value for MC_EMEM_CFG which holds the external memory * size (in KBytes) */ u_int32_t mc_emem_cfg; /* MC arbitration configuration */ /* Specifies the value for MC_EMEM_ARB_CFG */ u_int32_t mc_emem_arb_cfg; /* Specifies the value for MC_EMEM_ARB_OUTSTANDING_REQ */ u_int32_t mc_emem_arb_outstanding_req; u_int32_t emc_emem_arb_refpb_hp_ctrl; u_int32_t emc_emem_arb_refpb_bank_ctrl; /* Specifies the value for MC_EMEM_ARB_TIMING_RCD */ u_int32_t mc_emem_arb_timing_rcd; /* Specifies the value for MC_EMEM_ARB_TIMING_RP */ u_int32_t mc_emem_arb_timing_rp; /* Specifies the value for MC_EMEM_ARB_TIMING_RC */ u_int32_t mc_emem_arb_timing_rc; /* Specifies the value for MC_EMEM_ARB_TIMING_RAS */ u_int32_t mc_emem_arb_timing_ras; /* Specifies the value for MC_EMEM_ARB_TIMING_FAW */ u_int32_t mc_emem_arb_timing_faw; /* Specifies the value for MC_EMEM_ARB_TIMING_RRD */ u_int32_t mc_emem_arb_timing_rrd; /* Specifies the value for MC_EMEM_ARB_TIMING_RAP2PRE */ u_int32_t mc_emem_arb_timing_rap2pre; /* Specifies the value for MC_EMEM_ARB_TIMING_WAP2PRE */ u_int32_t mc_emem_arb_timing_wap2pre; /* Specifies the value for MC_EMEM_ARB_TIMING_R2R */ u_int32_t mc_emem_arb_timing_r2r; /* Specifies the value for MC_EMEM_ARB_TIMING_W2W */ u_int32_t mc_emem_arb_timing_w2w; /* Specifies the value for MC_EMEM_ARB_TIMING_R2W */ u_int32_t mc_emem_arb_timing_r2w; /* Specifies the value for MC_EMEM_ARB_TIMING_W2R */ u_int32_t mc_emem_arb_timing_w2r; u_int32_t mc_emem_arb_timing_rfcpb; /* Specifies the value for MC_EMEM_ARB_DA_TURNS */ u_int32_t mc_emem_arb_da_turns; /* Specifies the value for MC_EMEM_ARB_DA_COVERS */ u_int32_t mc_emem_arb_da_covers; /* Specifies the value for MC_EMEM_ARB_MISC0 */ u_int32_t mc_emem_arb_misc0; /* Specifies the value for MC_EMEM_ARB_MISC1 */ u_int32_t mc_emem_arb_misc1; u_int32_t mc_emem_arb_misc2; /* Specifies the value for MC_EMEM_ARB_RING1_THROTTLE */ u_int32_t mc_emem_arb_ring1_throttle; /* Specifies the value for MC_EMEM_ARB_OVERRIDE */ u_int32_t mc_emem_arb_override; /* Specifies the value for MC_EMEM_ARB_OVERRIDE_1 */ u_int32_t mc_emem_arb_override1; /* Specifies the value for MC_EMEM_ARB_RSV */ u_int32_t mc_emem_arb_rsv; u_int32_t mc_da_cfg0; u_int32_t mc_emem_arb_timing_ccdmw; /* Specifies the value for MC_CLKEN_OVERRIDE */ u_int32_t mc_clken_override; /* Specifies the value for MC_STAT_CONTROL */ u_int32_t mc_stat_control; /* Specifies the value for MC_VIDEO_PROTECT_BOM */ u_int32_t mc_video_protect_bom; /* Specifies the value for MC_VIDEO_PROTECT_BOM_ADR_HI */ u_int32_t mc_video_protect_bom_adr_hi; /* Specifies the value for MC_VIDEO_PROTECT_SIZE_MB */ u_int32_t mc_video_protect_size_mb; /* Specifies the value for MC_VIDEO_PROTECT_VPR_OVERRIDE */ u_int32_t mc_video_protect_vpr_override; /* Specifies the value for MC_VIDEO_PROTECT_VPR_OVERRIDE1 */ u_int32_t mc_video_protect_vpr_override1; /* Specifies the value for MC_VIDEO_PROTECT_GPU_OVERRIDE_0 */ u_int32_t mc_video_protect_gpu_override0; /* Specifies the value for MC_VIDEO_PROTECT_GPU_OVERRIDE_1 */ u_int32_t mc_video_protect_gpu_override1; /* Specifies the value for MC_SEC_CARVEOUT_BOM */ u_int32_t mc_sec_carveout_bom; /* Specifies the value for MC_SEC_CARVEOUT_ADR_HI */ u_int32_t mc_sec_carveout_adr_hi; /* Specifies the value for MC_SEC_CARVEOUT_SIZE_MB */ u_int32_t mc_sec_carveout_size_mb; /* Specifies the value for MC_VIDEO_PROTECT_REG_CTRL.VIDEO_PROTECT_WRITE_ACCESS */ u_int32_t mc_video_protect_write_access; /* Specifies the value for MC_SEC_CARVEOUT_REG_CTRL.SEC_CARVEOUT_WRITE_ACCESS */ u_int32_t mc_sec_carveout_protect_write_access; u_int32_t mc_generalized_carveout1_bom; u_int32_t mc_generalized_carveout1_bom_hi; u_int32_t mc_generalized_carveout1_size_128kb; u_int32_t mc_generalized_carveout1_access0; u_int32_t mc_generalized_carveout1_access1; u_int32_t mc_generalized_carveout1_access2; u_int32_t mc_generalized_carveout1_access3; u_int32_t mc_generalized_carveout1_access4; u_int32_t mc_generalized_carveout1_force_internal_access0; u_int32_t mc_generalized_carveout1_force_internal_access1; u_int32_t mc_generalized_carveout1_force_internal_access2; u_int32_t mc_generalized_carveout1_force_internal_access3; u_int32_t mc_generalized_carveout1_force_internal_access4; u_int32_t mc_generalized_carveout1_cfg0; u_int32_t mc_generalized_carveout2_bom; u_int32_t mc_generalized_carveout2_bom_hi; u_int32_t mc_generalized_carveout2_size_128kb; u_int32_t mc_generalized_carveout2_access0; u_int32_t mc_generalized_carveout2_access1; u_int32_t mc_generalized_carveout2_access2; u_int32_t mc_generalized_carveout2_access3; u_int32_t mc_generalized_carveout2_access4; u_int32_t mc_generalized_carveout2_force_internal_access0; u_int32_t mc_generalized_carveout2_force_internal_access1; u_int32_t mc_generalized_carveout2_force_internal_access2; u_int32_t mc_generalized_carveout2_force_internal_access3; u_int32_t mc_generalized_carveout2_force_internal_access4; u_int32_t mc_generalized_carveout2_cfg0; u_int32_t mc_generalized_carveout3_bom; u_int32_t mc_generalized_carveout3_bom_hi; u_int32_t mc_generalized_carveout3_size_128kb; u_int32_t mc_generalized_carveout3_access0; u_int32_t mc_generalized_carveout3_access1; u_int32_t mc_generalized_carveout3_access2; u_int32_t mc_generalized_carveout3_access3; u_int32_t mc_generalized_carveout3_access4; u_int32_t mc_generalized_carveout3_force_internal_access0; u_int32_t mc_generalized_carveout3_force_internal_access1; u_int32_t mc_generalized_carveout3_force_internal_access2; u_int32_t mc_generalized_carveout3_force_internal_access3; u_int32_t mc_generalized_carveout3_force_internal_access4; u_int32_t mc_generalized_carveout3_cfg0; u_int32_t mc_generalized_carveout4_bom; u_int32_t mc_generalized_carveout4_bom_hi; u_int32_t mc_generalized_carveout4_size_128kb; u_int32_t mc_generalized_carveout4_access0; u_int32_t mc_generalized_carveout4_access1; u_int32_t mc_generalized_carveout4_access2; u_int32_t mc_generalized_carveout4_access3; u_int32_t mc_generalized_carveout4_access4; u_int32_t mc_generalized_carveout4_force_internal_access0; u_int32_t mc_generalized_carveout4_force_internal_access1; u_int32_t mc_generalized_carveout4_force_internal_access2; u_int32_t mc_generalized_carveout4_force_internal_access3; u_int32_t mc_generalized_carveout4_force_internal_access4; u_int32_t mc_generalized_carveout4_cfg0; u_int32_t mc_generalized_carveout5_bom; u_int32_t mc_generalized_carveout5_bom_hi; u_int32_t mc_generalized_carveout5_size_128kb; u_int32_t mc_generalized_carveout5_access0; u_int32_t mc_generalized_carveout5_access1; u_int32_t mc_generalized_carveout5_access2; u_int32_t mc_generalized_carveout5_access3; u_int32_t mc_generalized_carveout5_access4; u_int32_t mc_generalized_carveout5_force_internal_access0; u_int32_t mc_generalized_carveout5_force_internal_access1; u_int32_t mc_generalized_carveout5_force_internal_access2; u_int32_t mc_generalized_carveout5_force_internal_access3; u_int32_t mc_generalized_carveout5_force_internal_access4; u_int32_t mc_generalized_carveout5_cfg0; /* Specifies enable for CA training */ u_int32_t emc_ca_training_enable; /* Set if bit 6 select is greater than bit 7 select; uses aremc.spec packet SWIZZLE_BIT6_GT_BIT7 */ u_int32_t swizzle_rank_byte_encode; /* Specifies enable and offset for patched boot rom write */ u_int32_t boot_rom_patch_control; /* Specifies data for patched boot rom write */ u_int32_t boot_rom_patch_data; /* Specifies the value for MC_MTS_CARVEOUT_BOM */ u_int32_t mc_mts_carveout_bom; /* Specifies the value for MC_MTS_CARVEOUT_ADR_HI */ u_int32_t mc_mts_carveout_adr_hi; /* Specifies the value for MC_MTS_CARVEOUT_SIZE_MB */ u_int32_t mc_mts_carveout_size_mb; /* Specifies the value for MC_MTS_CARVEOUT_REG_CTRL */ u_int32_t mc_mts_carveout_reg_ctrl; /* End of generated code by warmboot_code_gen */ } nvboot_sdram_params; #endif /* #ifndef INCLUDED_NVBOOT_SDRAM_PARAM_T210_H */