/*
 * Copyright (c) 2012 The Linux Foundation. All rights reserved.*
   Source : APQ8064 LK Boot

 * Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above
 *    copyright notice, this list of conditions and the following
 *    disclaimer in the documentation and/or other materials provided
 *    with the distribution.
 *  * Neither the name of Code Aurora Forum, Inc. nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef __SOC_QUALCOMM_IPQ806X_GPIO_H_
#define __SOC_QUALCOMM_IPQ806X_GPIO_H_

#include <types.h>

#define GPIO_FUNC_ENABLE			1
#define GPIO_FUNC_DISABLE			0
#define FUNC_SEL_1				1
#define FUNC_SEL_3				3
#define FUNC_SEL_GPIO				0
#define GPIO_DRV_STR_10MA			0x4
#define GPIO_DRV_STR_11MA			0x7

/* GPIO TLMM: Direction */
#define GPIO_INPUT      0
#define GPIO_OUTPUT     1

/* GPIO TLMM: Pullup/Pulldown */
#define GPIO_NO_PULL    0
#define GPIO_PULL_DOWN  1
#define GPIO_KEEPER     2
#define GPIO_PULL_UP    3

/* GPIO TLMM: Drive Strength */
#define GPIO_2MA        0
#define GPIO_4MA        1
#define GPIO_6MA        2
#define GPIO_8MA        3
#define GPIO_10MA       4
#define GPIO_12MA       5
#define GPIO_14MA       6
#define GPIO_16MA       7

/* GPIO TLMM: Status */
#define GPIO_DISABLE    0
#define GPIO_ENABLE     1

/* GPIO MAX Valid # */
#define GPIO_MAX_NUM  68

/* GPIO TLMM: Mask */
#define GPIO_CFG_PULL_MASK    0x3
#define GPIO_CFG_FUNC_MASK    0xF
#define GPIO_CFG_DRV_MASK     0x7
#define GPIO_CFG_OE_MASK      0x1

/* GPIO TLMM: Shift */
#define GPIO_CFG_PULL_SHIFT   0
#define GPIO_CFG_FUNC_SHIFT   2
#define GPIO_CFG_DRV_SHIFT    6
#define GPIO_CFG_OE_SHIFT     9

/* GPIO IO: Mask */
#define GPIO_IO_IN_MASK       0x1
#define GPIO_IO_OUT_MASK      0x1

/* GPIO IO: Shift */
#define GPIO_IO_IN_SHIFT      0
#define GPIO_IO_OUT_SHIFT     1

typedef u32 gpio_t;

void gpio_tlmm_config_set(gpio_t gpio, unsigned int func,
			  unsigned int pull, unsigned int drvstr,
			  unsigned int enable);

void gpio_tlmm_config_get(gpio_t gpio, unsigned int *func,
			  unsigned int *pull, unsigned int *drvstr,
			  unsigned int *enable);

void gpio_io_config_set(gpio_t gpio, unsigned int out);

/* Keep this to maintain backwards compatibility with the vendor API. */
static inline void gpio_tlmm_config(unsigned int gpio, unsigned int func,
				    unsigned int dir, unsigned int pull,
				    unsigned int drvstr, unsigned int enable)
{
	gpio_tlmm_config_set(gpio, func, pull, drvstr, enable);
}
#endif // __SOC_QUALCOMM_IPQ806X_GPIO_H_