/* * This file is part of the libpayload project. * * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2008 coresystems GmbH * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _PCI_H #define _PCI_H #include typedef u32 pcidev_t; /* Device config space registers. */ #define REG_VENDOR_ID 0x00 #define REG_DEVICE_ID 0x02 #define REG_COMMAND 0x04 #define REG_STATUS 0x06 #define REG_REVISION_ID 0x08 #define REG_PROG_IF 0x09 #define REG_SUBCLASS 0x0A #define REG_CLASS 0x0B #define REG_CACHE_LINE_SIZE 0x0C #define REG_LATENCY_TIMER 0x0D #define REG_HEADER_TYPE 0x0E #define REG_BIST 0x0F #define REG_BAR0 0x10 #define REG_BAR1 0x14 #define REG_BAR2 0x18 #define REG_BAR3 0x1C #define REG_BAR4 0x20 #define REG_BAR5 0x24 #define REG_CARDBUS_CIS_POINTER 0x28 #define REG_SUBSYS_VENDOR_ID 0x2C #define REG_SUBSYS_ID 0x2E #define REG_DEV_OPROM_BASE 0x30 #define REG_CAP_POINTER 0x34 #define REG_INTERRUPT_LINE 0x3C #define REG_INTERRUPT_PIN 0x3D #define REG_MIN_GRANT 0x3E #define REG_MAX_LATENCY 0x3F /* Bridge config space registers. */ #define REG_PRIMARY_BUS 0x18 #define REG_SECONDARY_BUS 0x19 #define REG_SUBORDINATE_BUS 0x1A #define REG_SECONDARY_LATENCY 0x1B #define REG_IO_BASE 0x1C #define REG_IO_LIMIT 0x1D #define REG_SECONDARY_STATUS 0x1E #define REG_MEMORY_BASE 0x20 #define REG_MEMORY_LIMIT 0x22 #define REG_PREFETCH_MEM_BASE 0x24 #define REG_PREFETCH_MEM_LIMIT 0x26 #define REG_PREFETCH_BASE_UPPER 0x28 #define REG_PREFETCH_LIMIT_UPPER 0x2C #define REG_IO_BASE_UPPER 0x30 #define REG_IO_LIMIT_UPPER 0x32 #define REG_BRIDGE_OPROM_BASE 0x38 #define REG_BRIDGE_CONTROL 0x3C #define REG_COMMAND_IO (1 << 0) #define REG_COMMAND_MEM (1 << 1) #define REG_COMMAND_BM (1 << 2) #define HEADER_TYPE_NORMAL 0 #define HEADER_TYPE_BRIDGE 1 #define HEADER_TYPE_CARDBUS 2 #define HEADER_TYPE_MULTIFUNCTION 0x80 #define PCI_ADDR(_bus, _dev, _fn, _reg) \ (0x80000000 | (_bus << 16) | (_dev << 11) | (_fn << 8) | (_reg & ~3)) #define PCI_DEV(_bus, _dev, _fn) \ (0x80000000 | (_bus << 16) | (_dev << 11) | (_fn << 8)) #define PCI_BUS(_d) ((_d >> 16) & 0xff) #define PCI_SLOT(_d) ((_d >> 11) & 0x1f) #define PCI_FUNC(_d) ((_d >> 8) & 0x7) u8 pci_read_config8(u32 device, u16 reg); u16 pci_read_config16(u32 device, u16 reg); u32 pci_read_config32(u32 device, u16 reg); void pci_write_config8(u32 device, u16 reg, u8 val); void pci_write_config16(u32 device, u16 reg, u16 val); void pci_write_config32(u32 device, u16 reg, u32 val); int pci_find_device(u16 vid, u16 did, pcidev_t *dev); u32 pci_read_resource(pcidev_t dev, int bar); void pci_set_bus_master(pcidev_t dev); #endif