Release Notes for
                        -----------------
             Mullins Platform Initialization (MullinsPI)

=============================================================================

coreboot usage information:

	    AGESA source (binary PI)  --->
	(3rdparty/pi/amd/00730F01) AGESA PI directory path
	(FT3b/AGESA.bin) AGESA PI binary file name
	(0xFFE00000) AGESA PI binary address in ROM

	config MMCONF_BASE_ADDRESS
		hex
		default 0xF8000000

	config MMCONF_BUS_NUMBER
		int
		default 64

=============================================================================

MullinsPI Version: 1.0.0.A                         Release Date: July 2015
BinaryPI Version: 1.1                             Build date: Aug. 25 2015
Built by coreboot toolchain v1.27 March 8th, 2015
Test Board: Olive Hill Plus

=============================================================================
- Update to MullinsPI 1.0.0.A
- BUG465142: ECC error injection fails

Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.9:

- BUG466307: PSP Trustlets is not updated properly


Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.8:

- ENH466202: PSP FW stack version D.1.1.4D
- ENH460470: Remove the PSP DEBUG info to fix system hanging issue
- PLAT-986:  Initial iTpmControlArea to avoid potential exception
- ENH465927: Enable MMIO decode in iTpmGetResponse


Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.7:

- ENH465438: Add SMBIOS support for Sempron part
- ENH465709: PSP FW stack version D.1.1.4A
- ENH465474: SMU_Firmware_14_33


Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.6:

- ENH465011: PSP FW stack version D.1.1.47
- BUG463002: SATA hardware revision ID gets overwritten
- ENH463253: LAN performance data(Auto negotiation/1000M)


Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.5:

- ENH464327: PSP FW stack version D.1.1.42
- ENH463121: AGESA Memory Option for JEDEC DDR3/DDR4 SPD MAC
- BUG455965: System hangs at PC02FF when GFX card(Asic type: Topaz) plugged in
- ENH462603: Enable SRT only when the platform really needs to run > 85C


Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.4:

- ENH462390: PSP FW stack version D.1.1.36
- ENH457952: Publish PSP fTPM ready PPI
- BUG460543: ECC lane fails training
- BUG458825: Typo in dec file
- ENH455439: Save & Restore PSP Bar3 related register for S3
- BUG458331: Correct Size mismatch of create the recovery guid Hob
- ENH455923: Update ALIB to support Windows XP
- ENH454744: Save Restore FakeSMI related registers for S3

=============================================================================

=============================================================================

MullinsPI Version: 1.0.0.4                         Release Date: Jun. 25 2015
BinaryPI Version: 1.0

=============================================================================
From this commit we use two version numbers to identify binary PI:
MullinsPI Version is the AGESA version. This is the same as original
MullinsPI.
BinaryPI Version is the AGESA.bin version. We will change this version when
we upload new AGESA.bin.

- Add PspMboxBiosCmdDramInfo and PspMboxBiosCmdExitBootServices to fix
  Windows 7 hang after graphics driver installed.

=============================================================================