Release Notes for ----------------- Stoney Platform Initialization (StoneyPI) ============================================================================= Version: 1.3.0.9 Release Date: Nov 2017 File: StoneyPI_1_3_0_9.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.9 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.3 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v031 - Bristol AM4 VBIOS v003 - Stoney Generic VBIOS v007 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.17.0 - Bristol AM4 1.27.19.0 - Stoney 26.16.0 - Stoney FT4 Fanless 33.6.0 PSP - Carrizo/Bristol 0.5.0.36 for TCG 1.22 0.5.0.37 for TCG 1.37 - Stoney 0.6.0.21 for TCG 1.22 0.6.0.22 for TCG 1.37 PT FW - 170504_40_01_00 PlatformBIOS - Gardenia Platform BIOS RGY1309A.FD Jadeite Platform BIOS RJD1309A.FD Myrtle Platform BIOS RMY1309A.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.8 - PLAT-17087: Create a PCD to control PspMboxBiosClearSmmLock at RTB Event - PLAT-16146: Limit all BIOS-2-PSP commands after BOOT_DONE in SMM mode only using specified SMM command buffer - PLAT-15874: Move IOMMU IOAGR Programming to Early Init Phase - PLAT-25107: AGESA FCH modifies flash - PLAT-26520: [ST] PSP Firmware Release 0.6.0.22 - PLAT-25858: [ST] PSP Firmware Release 0.6.0.21 - PLAT-26524: [BR] PSP Firmware Release 0.5.0.37 - PLAT-25861: [BR] PSP Firmware Release 0.5.0.36 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling 4. Important Notes - To pass Win10 RS3 HLK on the new system, please integrate PSP FW for TCG 1.37 into BIOS; for existing shipped system, please continue using PSP FW for TCG 1.22. ============================================================================= Version: 1.3.0.8 Release Date: Sep 2017 File: StoneyPI_1_3_0_8.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.8 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.2 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v031 - Bristol AM4 VBIOS v003 - Stoney Generic VBIOS v007 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.17.0 - Bristol AM4 1.27.19.0 - Stoney 26.16.0 - Stoney FT4 Fanless 33.6.0 PSP - Carrizo/Bristol 0.5.0.2F - Stoney 0.6.0.1E PT FW - 170504_40_01_00 PlatformBIOS - Gardenia Platform BIOS RGY1308A.FD Jadeite Platform BIOS RJD1308A.FD Myrtle Platform BIOS RMY1308A.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.7 - PLAT-23583: [ST] New brand string PRO A6 and PRO A4 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.7 Release Date: Jul 2017 File: StoneyPI_1_3_0_7.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.7 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.2 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v031 - Bristol AM4 VBIOS v003 - Stoney Generic VBIOS v007 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.17.0 - Bristol AM4 1.27.19.0 - Stoney 26.16.0 - Stoney FT4 Fanless 33.6.0 PSP - Carrizo/Bristol 0.5.0.2F - Stoney 0.6.0.1E PT FW - 170504_40_01_00 PlatformBIOS - Gardenia Platform BIOS RGY1307A.FD Jadeite Platform BIOS RJD1307A.FD Myrtle Platform BIOS RMY1307A.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.6 - PLAT-22781: SMU Firmware Release for FT4 Fanless 33.6.0 - PLAT-14159: Update USB recovery code - PLAT-16434: FCH ASL code incorrect operation region size - PLAT-17156: Update IoMux setting of I2C2 & I2C3 - PLAT-20735: Report the number of active DIMMs in PartitionWidth - PLAT-20868: Update AcpiGpe0Blk and Pm1Status register programming - PLAT-20395: [PT] ODD device behinds PT GPP lost after S3 resume - PLAT-22772: [PT] Update PT FW to 170504_40_01_00 - PLAT-22033: Set MSRC001_0015[3] TlbCacheDis to 1 in all cores - PLAT-21514: FCH temperature monitoring bug 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.6 Release Date: Dec 2016 File: StoneyPI_1_3_0_6.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.6 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.2 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v031 - Bristol AM4 VBIOS v003 - Stoney Generic VBIOS v007 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.17.0 - Bristol AM4 1.27.19.0 - Stoney 26.16.0 - Stoney FT4 Fanless 33.5.0 PSP - Carrizo/Bristol 0.5.0.2F - Stoney 0.6.0.1E PT FW - 160919_40_01_00 PlatformBIOS - Gardenia Platform BIOS RGY1306B.FD Jadeite Platform BIOS RJD1306B.FD Myrtle Platform BIOS RMY1306B.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.5 - PLAT-13570: [CZ/BR] PSP Firmware Release 0.5.0.2F - PLAT-13518: [ST] PSP Firmware Release 0.6.0.1E - PLAT-12728: [PT] Support Fine tune USB 3.0 TX for separate port - PLAT-12173: [PT] After select "PT SATA Port" Disable to Enable ,the HDD populated on PT cannot be shown in boot Manager by warm reset - PLAT-12168: Clear IRQ1FilterEn and IRQ12FilterEn by default - PLAT-12672: SMBIOS Type 20 Partition Row Position should avoid 0 - PLAT-13337: Update interface to override VrefHspeed per Dct and M-state - PLAT-13524: Update BuildPspImage.bat to use python interpreter directly - PLAT-12060: PMx00[AsfMasterEn] should not be touched - PLAT-13509: [BR] SMU Firmware Release 27.17.0 - PLAT-12071: [ST] DDR2400 UDIMM fails S3 resume 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.5 Release Date: Sep 2016 File: StoneyPI_1_3_0_5.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.5 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v031 - Bristol AM4 VBIOS v003 - Stoney Generic VBIOS v007 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.16.0 - Bristol AM4 1.27.19.0 - Stoney 26.16.0 - Stoney FT4 Fanless 33.5.0 PSP - Carrizo/Bristol 0.5.0.2D - Stoney 0.6.0.1C PT FW - 160919_40_01_00 PlatformBIOS - Gardenia Platform BIOS RGY1305B.FD Jadeite Platform BIOS RJD1305B.FD Myrtle Platform BIOS RMY1305B.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.4 - PLAT-11954: [PT] PT FW update to 160919_40_01_00 - PLAT-11439: Customize boot display device by integrated system info table - PLAT-11075: Add interface to override memory data bus configuration table - PLAT-11608: Update BuildPspDirectory to use Max size if recovery enabled - PLAT-11501: Alignment issue for DxFxx2A6_ADDRESS - PLAT-11520: [BR/CZ] PSP Firmware Release 0.5.0.2D - PLAT-10832: Fix InterleavePosition and InterleavedDataDepth in DMI Type20 - PLAT-10839: Incorrect index used to find DdrMaxRate when NPST is disabled - PLAT-11679: Fix BSOD 0x7B for CF9/0Eh reset - PLAT-11684: [PT] Modify PT load FW sequence 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.4 Release Date: Sep 2016 File: StoneyPI_1_3_0_4.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.4 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Bristol AM4 VBIOS v002 - Stoney Generic VBIOS v006 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.16.0 - Bristol AM4 1.27.19.0 - Stoney 26.16.0 - Stoney FT4 Fanless 33.5.0 PSP - Carrizo/Bristol 0.5.0.2C - Stoney 0.6.0.1C PlatformBIOS - Gardenia Platform BIOS RGY1304B.FD Jadeite Platform BIOS RJD1304B.FD Myrtle Platform BIOS RMY1304B.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.3 - PLAT-11297: [CZ/BR] Move CZ DDR4 Detection Scheme to beforeApLaunch table - PLAT-11186: Clear LPCxB8[24] PrefetchEnSpiFromHost bit to 0 for SPI TPM - PLAT-11158: BSOD 0x9F in S3 or S4 stress test - PLAT-10820: Change BGADJ value to 7h for USB - PLAT-10866: [ST] Add A4 Series string to DMI table - PLAT-10910: [BR] Update D18F4x40 register setting - PLAT-10942: [BR] PSP Firmware Release 0.5.0.2C - PLAT-11083: [BR FP4] SMU Firmware Release 27.16.0 - PLAT-11154: [ST] Fanless SMU Firmware Release 33.5.0 - PLAT-11026: [CZ] Enable Data interleaving and change the ECC symbol size to x8 - PLAT-10713: [CZ/BR] Implement CZ DDR4 Detection Scheme - PLAT-10012: [CZ] Add Opteron X3 to DMI table 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.3 Release Date: Aug 2016 File: StoneyPI_1_3_0_3.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.3 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Bristol AM4 VBIOS v002 - Stoney Generic VBIOS v006 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.15.0 - Bristol AM4 1.27.19.0 - Stoney 26.16.0 - Stoney FT4 Fanless 33.4.0 PSP - Carrizo/Bristol 0.5.0.29 - Stoney 0.6.0.1C PlatformBIOS - Gardenia Platform BIOS RGY1303B.FD Jadeite Platform BIOS RJD1303B.FD Myrtle Platform BIOS RMY1303B.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.2 - PLAT-10652: [BR AM4] Critical FW/BIOS fix for SMU FW setting [BR AM4] SMU Firmware Release 1.27.19.0 - PLAT-10677: [BR/CZ] PSP Firmware Release 0.5.0.29 - PLAT-10470: [ST] PSP Firmware Release 0.6.0.1C - PLAT-10358: [ST] SMU Firmware Release 26.16.0 - PLAT-10630: [PT] Win7 boot fail from FCH SATA if PT SATA with device connected is disabled - PLAT-10446: Missing terminator for memory override arrays - PLAT-10458: [PT] Publish PT FW init done Ppi in after FW loaded - PLAT-9522: Limit the BIOS command ID to 7 bits - PLAT-7714: AGESA SMI handler errors - PLAT-9964: [BR] 2133 x/DR Disable RttWr and RttPark - PLAT-10252: [PT] Update PT FW to 160722_40_01_00 - PLAT-10081: [PT] Support Redriver feature - PLAT-10005: [PT] Support Equalization4 feature 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.2 Release Date: Jul 2016 File: StoneyPI_1_3_0_2.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.2 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Bristol AM4 VBIOS v002 - Stoney Generic VBIOS v006 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.15.0 - Bristol AM4 1.27.18.0 - Stoney 26.15.0 - Stoney FT4 Fanless 33.4.0 PSP - Carrizo/Bristol 0.5.0.27 - Stoney 0.6.0.1A PlatformBIOS - Gardenia Platform BIOS RGY1302B.FD Jadeite Platform BIOS RJD1302B.FD Myrtle Platform BIOS RMY1302B.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.1 - PLAT-9884: [PT] Update PT FW to 160707_40_01_02 - PLAT-9656: Add AmdPeiInitEarlyPpiGuid in Promontory PEI dependency - PLAT-9529: [BR AM4] Optimal DRDR CPU Vref level - PLAT-9542: HDD detection failure after update StoneyPI 1.3.0.0 - PLAT-9669: [ST] PSP Firmware Release 0.6.0.1A - PLAT-9670: [BR/CZ] PSP Firmware Release 0.5.0.27 - PLAT-6896: S3 resume fail with NB P-states disabled 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.1 Release Date: Jul 2016 File: StoneyPI_1_3_0_1.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev3.00 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.1 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Bristol AM4 VBIOS v002 - Stoney Generic VBIOS v006 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.15.0 - Bristol AM4 1.27.18.0 - Stoney 26.15.0 - Stoney FT4 Fanless 33.4.0 PSP - Carrizo/Bristol 0.5.0.26 - Stoney 0.6.0.19 PlatformBIOS - Gardenia Platform BIOS RGY1301B.FD Jadeite Platform BIOS RJD1301B.FD Myrtle Platform BIOS RMY1301B.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c CarrizoFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.0 - PLAT-9533: Enable AGESA Programming for PT SI function - PLAT-9532: [PT] PT FW update to 160622_40_F6_00 - PLAT-9453: Missmatching data type in SW SMI handler - PLAT-9502: [CZ/BR] PSP Firmware Release 0.5.0.26 - PLAT-9458: [ST] PSP Firmware Release 0.6.0.19 - PLAT-9233: Fix alignment error in DQS2DACCESS definition - PLAT-9221: Error Recovery not working with a bad DIMM in channel A - PLAT-9215: Add LoadPkgPowerParameters for the ALIB DPTCi function - PLAT-9022: [BR] BSOD 0x124 and reboot after S3 resume - PLAT-9139: [BR AM4] SMU Firmware Release 1.27.18.0 - PLAT-6650: DDR4 Memory Timing improvements/fixes - PLAT-8818: [ST] 2DPC memory imbalance margin improvement 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.3.0.0 Release Date: Jun 2016 File: StoneyPI_1_3_0_0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.06 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.07 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.3.0.0 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v063 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Bristol AM4 VBIOS v002 - Stoney Generic VBIOS v006 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.15.0 - Bristol AM4 1.27.16.0 - Stoney 26.15.0 - Stoney FT4 Fanless 33.4.0 PSP - Carrizo/Bristol 0.5.0.24 - Stoney 0.6.0.17 PlatformBIOS - Gardenia Platform BIOS RGY1300D.FD Jadeite Platform BIOS RJD1300D.FD Myrtle Platform BIOS RMY1300D.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.2.0.0 - PLAT-9082: [CZ/BR] PSP Firmware Release 0.5.0.24 - PLAT-9109: [PT] Add 75ms delay to avoid PT-PCIE link enter recovery mode when fails to loading PT FW - PLAT-9108: [PT] Add 75ms delay to avoid PT-PCIE link enter recovery mode after loading PT FW - PLAT-8956: [PT] Fail to Initial PROM XHCI FW if GPP PCI-E running at Gen3 - PLAT-9046: FCH MISCx50[16] should not be set - PLAT-8990: [ST] PSP Firmware Release 0.6.0.17 - PLAT-8939: [ST] Fanless SMU Firmware Release 33.4.0 - PLAT-7587: [BR] Intermittent Azalia verb programming failure on non-GPU OPN - PLAT-8924: [PT] Switch back to ROM code when loading PT FW fails - PLAT-8889: [CZ/BR] Duplicate RxDly/TxDly compensation on both DCT - PLAT-8882: [CZ/ST] DDR3 On-DIMM Thermal Sensor not functional - PLAT-8876: [PT] Leave PT SI programming to PT FW - PLAT-8825: [PT] Show post code 0xCCCC for 10s when loading PT FW fails - PLAT-8837: [ST] Update BIOS setting for CacheFlushOnHaltTmr and CacheFlushTmr - PLAT-8823: [PT] Promontory firmware update to 160519_40_F0_01 - PLAT-8819: [CZ/ST] Mixing DDR4 configuration can not boot up - PLAT-7329: [CZ/BR] Optimal termination and DQ delay for 2DPC margin - PLAT-8797: [PT] Add interface for USB3.1/3.0/2.0 and SATA SI tuning - PLAT-8718: [BR AM4] Turn off CPUID's TopologyExtensions feature flag - PLAT-8722: [PT] Add PCD to enable/disable FW check after loading XHC FW - PLAT-8690: [PT] Add Promontory GPIO SMM driver - PLAT-8644: [BR AM4] A12-9800E P-State abnormal behavior and error message in Windows event viewer - PLAT-8624: Enable CPU Idle Activity Monitor by default - PLAT-8621: Fix typo in PSP mutex register definition - PLAT-8055: [BR AM4] Missing Graphics Specific ACPI Methods and Objects - PLAT-8616: [ST] Add DMI info for A8 series - PLAT-8245: 1 DIMM per channel configuration support either MA0 or MA1 - PLAT-8424: Add help text information for BLDCFG_SYSTEM_CONFIGURATION - PLAT-8240: [ST] SMU Firmware Release 26.15.0 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.2.0.0 Release Date: Apr 2016 File: StoneyPI_1_2_0_0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.06 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.05 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.2.0.0 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v062.1 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Bristol AM4 VBIOS v002 - Stoney Generic VBIOS v006 - AMD Generic GOP v1.59 SMU - Carrizo 18.60.0 - Bristol FP4 27.15.0 - Bristol AM4 1.27.16.0 - Stoney 26.14.0 - Stoney FT4 Fanless 33.1.0 PSP - Carrizo/Bristol 0.5.0.20 - Stoney 0.6.0.14 PlatformBIOS - Gardenia Platform BIOS RGY1200C.FD Jadeite Platform BIOS RJD1200C.FD Myrtle Platform BIOS RMY1200C.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.2086 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.0.8.0 - PLAT-8247: [PT] Promontory FW update 160406_40_01_00 - PLAT-8205: [ST] PSP Firmware Release 0.6.0.14 - PLAT-8109: [CZ/BR] PSP Firmware Release 0.5.0.20 - PLAT-8120: [CZ] SMU Firmware Release 18.60.0 - PLAT-8083: [CZ/BR] Update A1 microcode patch 6118h - PLAT-7763: [BR AM4] BIOS pass setting to driver for HDMI re-timer - PLAT-7934: [ST] Brand String support for AMD Embedded G-Series - PLAT-7725: [ST FT4] DDR4 Addr/cmd setup timing setting update - PLAT-7931: [BR AM4] Sending Msg 0x86 to SMU in S3 entry - PLAT-7871: [BR AM4] SMU Firmware Release 1.27.16.0 - PLAT-7918: [ST FT4] Fanless SMU Firmware Release 33.1.0 - PLAT-7220: CPU Idle Activity Monitor Enablement message to SMU - PLAT-7761: [ST/BR] Print DQS Routing Type in HDTOUT log - PLAT-7061: [CZ/BR] Add option to configure DDR Rx delay Tx delay - PLAT-7668: PMU message block option TXdly for Diasy chain Topology - PLAT-7252: Add a customer table entry to specify the DQS routing type - PLAT-7533: Disable Compliance mode for XHCI controller - PLAT-7545: Fix potential overflow of PspLibTimeOut - PLAT-7536: [ST] Set ULV_MASK bit in SMU enablement message for TDP 6W OPN - PLAT-7508: Update PSP HSTI driver - PLAT-7488: [ST] Enable autopopdown exit on TDP 6W OPN - PLAT-6827: BTS error after S3 on EHCIx54 and EHCIx64 - PLAT-7422: Add mutex to ensure PSP SMI register atomic operation - PLAT-7335: Update HDTOUT to version 2.5.3 - PLAT-7248: Obsolete IO (based at PMIOx6C) takes IO decoding of 0x00 - PLAT-7201: [ST] SMU Firmware release 26.14.0 - PLAT-7191: [BR AM4] Individual USB port enable/disable function on PT - PLAT-7123: [BR AM4] Incorrect SATA class code for RAID - PLAT-5292: [BR AM4] Disable CLKRUN by default - PLAT-6766: [CZ] Incorrect ECC capability in SMBIOS - PLAT-6980: Changed 2DPC mix configs SR+DR/DR+SR @1866 M0 Tcl value to Tcl-1 - PLAT-6600: [BR AM4] SPI speed default setup in BIOS is 33Mhz 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.0.8.0 Release Date: Feb 2016 File: StoneyPI_1_0_8_0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.04 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.03 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Bristol Ridge in AM4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.0.8.0 for Family 15h Model 70h - 7Fh (Stoney) and Family 15h Model 60h - 6Fh (Bristol) platform solutions CPM - Common Platform Module v061 for Bristol/Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Stoney Generic VBIOS v005 - AMD Generic GOP v1.59 PlatformBIOS - Gardenia Platform BIOS RGY1080C.FD Jadeite Platform BIOS RJD1080C.FD Myrtle Platform BIOS RMY1080C.FD StoneyFp4Options.c StoneyFt4Options.c BristolAm4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.46.43 BIOSTestSuite - BIOSTestSuite v8.0.12.1936 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.0.0.0 ** Include Bristol AM4 support ** - PLAT-7009: [BR AM4] Update PT FW 160202_40_01_02 - PLAT-6945: [ST] PSP Firmware Release 0.6.0.10 - PLAT-6944: [BR FP4] PSP Firmware Release 0.5.0.1B - PLAT-6804: [BR AM4] Add SODIMM support - PLAT-6730: [BR AM4] SMU Firmware Release 1.27.15.0 - PLAT-6153: [BR AM4] Add option for over-clock on/off - PLAT-6677: Override PLL setting according to fuse - PLAT-6559: Add PcieEarlyWrapperTxPresetLoadingSequence and change RX preset value to 0x2 - PLAT-6623: [BR/CZ] 4:1:1:1:1 PCIe configuration does not support lane muxing - PLAT-6553: [ST] FP4 2DPC low margins solution fix - PLAT-6145: Extend TPM command timer from 2s to 120s - PLAT-6538: IMC is dead after S3 resume when XHCI is disabled in Device Manager - PLAT-6539: SSID of XHCI is not restored after S3 if XHCI is disabled in Device Manager - PLAT-6557: DDR4 1DPC SR and 1of2 SR changed RTT_PARK from 60 to 48ohm - PLAT-5643: A0bb in S3 resume when XHCI is disabled in Device Manager - PLAT-5840: [PT] Update AGESA FCH to support Promontory FW replacement - PLAT-5856: [BR AM4] Margin improvement for 2400 1DPC SR - PLAT-6010: [BR AM4] Add SATA RAID mode support - PLAT-5868: USB over current control does not match BKDG - PLAT-6231: Provide interface for sending command to TA 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 1.0.0.0 Release Date: Jan 2016 File: StoneyPI_1_0_0_0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.04 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.03 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 1.0.0.0 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v059 for Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Stoney Generic VBIOS v005 - AMD Generic GOP v1.59 PlatformBIOS - Gardenia Platform BIOS RGY1000B.FD Jadeite Platform BIOS RJD1000B.FD StoneyFp4Options.c StoneyFt4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 BIOSTestSuite - BIOSTestSuite v8.0.12.1936 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.8.1 - PLAT-6411: Reduce memory training time by eliminating PMU messages - PLAT-5708: Add setTokenFlag P2C command to reduce delay in PSP FW - PLAT-6306: [ST] PSP Firmware release 0.6.0.D - PLAT-6304: [BR/CZ] PSP Firmware release 0.5.0.17 - PLAT-6377: [ST] SMU Firmware Release 26.12.0 - PLAT-6228: Disable SATA D3 Cold - PLAT-6079: Update PMIOx08[20] ShutDownOption setting - PLAT-6143: [ST] Retry for intermittent PMU 2D training failure - PLAT-5840: Reserve entry 0x1B in PSP directory - PLAT-5801: [BR] Disable SCLK Stretcher on AM4 package - PLAT-5698: [BR] Add RAID support for AM4 package - PLAT-5654: [PSP] Remove the incorrect ASSERT 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 0.0.8.1 Release Date: Dec 2015 File: StoneyPI_0_0_8_1.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.03 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.02 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 0.0.8.1 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v058.1 for Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Stoney Generic VBIOS v005 - AMD Generic GOP v1.59 PlatformBIOS - Gardenia Platform BIOS RGY0081C.FD Jadeite Platform BIOS RJD0081C.FD StoneyFp4Options.c StoneyFt4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 BIOSTestSuite - BIOSTestSuite v8.0.12.1936 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.8.0 - PLAT-5999: [BR] Brand String support for A4, PRO A4 and Athlon X4 series - PLAT-6119: [BR] SMU FW release 27.15.0 - PLAT-6114: [ST] PSP FW release 0.6.0.0C - PLAT-6082: [ST] Memory Section Update from BKDG 1.03 - PLAT-6019: [ST] Update A0 microcode patch 6704 - PLAT-6022: [CZ/BR] Update A1 microcode patch 6115 - PLAT-5968: [BR/CZ] Retry for intermittent PMU 2D training failure - PLAT-6118: [ST] SMU FW release 26.11.0 - PLAT-6115: [BR] PSP FW Release 0.5.0.16 - PLAT-5591: [ST] FT4 25W unable to transition to DPM7 (800Mhz) - PLAT-5671: Adjust PHY impedance calibration value by 3 for all XHCI USB2 ports - PLAT-5672: [ST] Turn off CPUID's TopologyExtensions feature flag - PLAT-5648: [ST] Brand String support for A9 and E2 series - PLAT-5616: [CZ] SMU firmware release 18.58.0 - PLAT-5579: Incorrect Common Clock setting on Upstream port and End Point that is not in function 0 - PLAT-5490: Simplified MemRestore in support of Capsule Mode by way of S3 - PLAT-5486: Ignore PSP BAR MSR programming if already set - PLAT-3098: Fix incorrect address of PCIE Ready message when plug NIC 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 0.0.8.0 Release Date: Dec 2015 File: StoneyPI_0_0_8_0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.03 (#55072) - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 60h-6Fh rev3.02 (#50742) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 0.0.8.0 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v058 for Stoney platform solution VBIOS - Carrizo Generic VBIOS v030 - Stoney Generic VBIOS v004 - AMD Generic GOP v1.59 PlatformBIOS - Gardenia Platform BIOS RGY0080C.FD Jadeite Platform BIOS RJD0080C.FD StoneyFp4Options.c StoneyFt4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 BIOSTestSuite - BIOSTestSuite v8.0.12.1936 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.7.0 - PLAT-5263: Extra audio end points in display HD audio device D1:F1 - PLAT-5381: [ST] SMU FW release 26.8.0 - ENH468077: [BR] SMU FW release 27.14.0 - PLAT-5371: [ST] PSP FW release 0.6.0.9 - PLAT-5339: [BR/CZ] PSP FW release 0.5.0.13 - PLAT-2783: Intermittent semaphore error in MP service - PLAT-4956: [ST] Enable SATA dynamic PLL shutdown - PLAT-5023: [ST] Disable xHCI D3 cold - PLAT-2781: Update xHC USB2.0 Common PHY Impedance Calibration - PLAT-5001: [BR] Customize SATA PHY settings based on trace length - PLAT-5026: [ST] BLDCFG_GPU_FREQUENCY_LIMIT feature need to override SclkDid - PLAT-5009: [CZ/BR] BLDCFG_GPU_FREQUENCY_LIMIT feature need to override SclkDid - PLAT-5020: [BR] Disable xHCI D3 cold - PLAT-5013: [ST] Illegal combination of BankSwap/BankSwapAddr8En/DctSelBankSwap - PLAT-4959: Remove FCH Azalia code - PLAT-4927: Mismatched data structure in C and ASL file - PLAT-4978: FCH SD Controller can not detect SD card when in SD 2.0 mode - PLAT-4926: [BR] 2133 x/DR low margin improvement - PLAT-2625: Common SMBIOS Type 17 shows incorrect information on DDR4 - PLAT-4913: [ST] BIOS should disable SMU feature ULV by default - PLAT-4868: [ST] Enable DFS BYPASS - PLAT-3080: [ST] Enable fix for SATA dynamic PLL shutdown - PLAT-3052: [CZ] Add A1 microcode patch 6113 - PLAT-2935: [ST] Revert to CZ Display underflow - PLAT-2937: Limit support on "Far DIMM slot" for 1 of 2 DIMM configuration - PLAT-2854: [ST] Disable SMU post code by default - PLAT-2933: Update bridge interrupt selection in IOAPIC - PLAT-2852: [ST] Add A0 microcode patch 6703 - PLAT-2917: [CZ] Memory coding errors - PLAT-2750: Move PSP S3Script for PspDxe to PspSmm - PLAT-2791: Disable IRQ routing for INTE# - PLAT-2792: Update GNB IOAPIC routing not to use INTE/F 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2682: HDTOUT script cannot work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 0.0.7.0 Release Date: Oct 2015 File: StoneyPI_0_0_7_0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.02 (#55072) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) Supported processors: - Stoney Ridge in FP4 and FT4 package - Bristol Ridge in FP4 package - Carrizo in FP4 package ============================================================================= 1. Package contents AGESA - AGESA Arch2008 0.0.7.0 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v056 for Stoney platform solution VBIOS - Carrizo Generic VBIOS v028 - Stoney Generic VBIOS v003 - AMD Generic GOP v1.59 PlatformBIOS - Gardenia Platform BIOS RGY0070F.FD Jadeite Platform BIOS RJD0070F.FD StoneyFp4Options.c StoneyFt4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 BIOSTestSuite - BIOSTestSuite v8.0.12.1931 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.6.0 - PLAT-3081: Disable DFS_Bypass in PI 0.0.7.0 RC6 to work around PLAT-2717 - PLAT-2424: Bristol Ridge USB3.0 TSSC Fail - PLAT-2873: [BR/CZ] PSP FW release 0.5.0.F - PLAT-2874: [ST] PSP FW release for 0.6.0.6 - ENH467447: [BR] FP4 SMU FW 27.12.0 Release - PLAT-2857: [ST GNB] Should report single channel memory in System Info Table - PLAT-2855: [ST] STONEY SMU FW RELEASE 26.3.0 - ENH467300: [BR] Enable AutoPopDownExit feature and set PopDownPstate - PLAT-2808: [CZ] Send SMU GpuPowerDown service request if GPU_DIS = 1 - PLAT-2807: [CZ] SMU Firmware release 18.57.0 - PLAT-2764: Parade HDCP2.2 DP->HDMI chip Support - PLAT-2340: Incorrect programming of D18F3xA8[HwPstateMaxVal] - PLAT-2474: [BR] DDR4 S3 resume fails at DDR2400 - PLAT-2578: AGESA should halt if SMU returns SMC_FATAL response - PLAT-2299: [ST] DDR4: Disable Bank Group Mirror for x16 DIMMs - PLAT-1507: [BR] DDR4 2400 support with cTDP 35W - PLAT-2515: BLDCFG_GPU_FREQUENCY_LIMIT not functional - PLAT-2569: USB3 PHY setting update - PLAT-2321: SD SSID changed when run S3 some loops on Win7 - PLAT-2525: [ST] GMC programming Guide update - PLAT-2520: [BR] NbPstateThreshold register is set to 0 when 2CU enabled - PLAT-2530: [BR] Update SCS data file name - PLAT-2145: [BR] Thermal Controller Verification failed - PLAT-2149: [BR] Request to change Onion3 priority on BR from Low to Medium 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2682: HDTOUT script cannot work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 0.0.6.0 Release Date: Sep 2015 File: StoneyPI_0.0.6.0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.02 (#55072) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) ============================================================================= 1. Package contents AGESA - AGESA Arch2008 0.0.6.0 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v055 for Stoney platform solution VBIOS - Carrizo Generic VBIOS v028 - Stoney Generic VBIOS v001 - AMD Generic GOP v1.59 PlatformBIOS - Gardenia Platform BIOS RGY0060C.FD Jadeite Platform BIOS RJD0060C.FD StoneyFp4Options.c StoneyFt4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 BIOSTestSuite - BIOSTestSuite v8.0.12.1931 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.5.0 - ENH467090: [BR FP4] SMU FW 27.9.0 Release - PLAT-2431: Add sample code for PSP Directory - PLAT-2436: [BR] Restore lost precision for tCCD_L @ DDR2400 - PLAT-2435: Disable SelfRefreshAbort - PLAT-2388: [ST FT4] Add UDIMM MaxFreq table support - PLAT-2422: Fix D18F3xDC[HwPstateMaxVal] programming - PLAT-2429: CloseEvent for PCI enumeration callback in PSP DXE driver - PLAT-2414: [BR] PSP FW release 0.5.0.0C - PLAT-2269: [ST] Correct CkeToCsMap for FT4 - PLAT-2248: [BR] Set default TDP according to the actual fuse - PLAT-2274: Disable post code in _PS0/_PS3 by default - PLAT-2347: [ST] Disable BTC by default - DESPCNB-77: Change BIOS Recommendation to 2h - ENH461599: [CZ] Declare PSP Bar3 in EFI_MEMORY_RUNTIME - PLAT-2329: Update PSPEntryInfo according to the processor installed - PLAT-2328: [ST] Add S3 NVRAM binary - PLAT-2325: [ST] Remove Pcie TxPreset loading sequence - PLAT-2317: Set BankSwapOnly=Enabled & BankGroupSwap=Disabled by default - PLAT-2310: [ST] Set default engine clock(SCLK) to 400MHz - PLAT-2309: [ST] PCI ACS enable request - PLAT-2308: [ST] Increase N_FTS request - PLAT-2307: [ST] Set REG_HPGI_PRESENCE_DETECT_STATE_CHANGE_EN = 1 - PLAT-2306: [ST] ACP Power Gating - PLAT-2305: [ST] Bring-up SMU f/w release 26.1.25 - PLAT-2292: [ST] Set PIF_DEGRADE_PWR_PLL_MODE =0x0 - PLAT-2290: [ST] Remove SB link info function - PLAT-2289: [ST] update GNB code to load correct SCS data - PLAT-2287: [ST] update GNB fuse table - PLAT-2286: [ST] Force PCIe GPP reconfig even PCIe config does not changed - PLAT-2285: [ST] incorrect MainPllOpFreqIdStartup value set to ulDentistVCOFreq - PLAT-2284: [ST] Update BTC - fuse bit location changed - PLAT-2301: Two more configs for power optimization sync for DDR4 - PLAT-2281: Add Time out mechanism for fTPM command execution - PLAT-2268: DDR4 Power optimization sync - PLAT-2222: [ST] Update ST BKDG MRL Training sequence so fudge is not padded - PLAT-2219: [ST] Change CkeToCsMap for FT4 - PLAT-1353: [ST] FCH code doesn't match BKDG recommended value - PLAT-2188: Update ST debug unlock key - PLAT-2187: [ST] Add DDR3 FT4 Memory Stretch Frequency table - PLAT-2186: [ST] Enable DDR4 option in FT4 in PlatformInstall.h - PLAT-2181: [ST] FT4 PkgId should be 4 - PLAT-2179: SwUsb3SlpShutdown should not be set when other bits are touched - PLAT-2178: [ST] NPST related fuse location was changed - PLAT-2174: [ST] Add Memory support for FT4 - ENH466732: Program LFPS Detect Threshold value based on the fuse value - PLAT-2077: Frame Buffer Carve Out option for Hybrid Secure Frame Buffer - ENH466739: [CZ] update DMI ProcFamily table - PLAT-2127: [CZ] Disable BankGroupSwap by default - PLAT-2091: Set SwNbPstateLoDis to force the NB Pstate in ALIB - PLAT-2060: [CZ] Intialize original WrDat2dDlys before making an override - PLAT-2022: ACPI_ATCS_PCIEDEVICEREADY is taking 37 ms - PLAT-2065: [ST] PSP FW release for 0.6.0.2 - PLAT-1300: fTPM no functional after S0i3 resume - PLAT-2027: BuildPspDirectory Update to 1.28 - PLAT-1276: [ST] Set the VDDP for bootup and S-states based on different OPN - PLAT-1959: Incorrect pGpioTbl->GpioPin setting in FchPeLib.c - PLAT-1948: [BR] BTCGBV message needs to be sent after shadowPstates 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work - PLAT-2682: HDTOUT script cannot work - PLAT-2536: S3 resume fail with core leveling ============================================================================= Version: 0.0.5.0 Release Date: Aug 2015 File: StoneyPI_0.0.5.0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.01 (#55072) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) ============================================================================= 1. Package contents AGESA - AGESA Arch2008 0.0.5.0 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v054 for Stoney platform solution VBIOS - Carrizo Generic VBios v027 & Gop v1.59 PlatformBIOS - Gardenia Platform BIOS RGY0050A.FD Jadeite Platform BIOS RJD0050A.FD gardenia_st_family15h.bsd file StoneyFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 BIOSTestSuite - BIOSTestSuite v8.0.12.1928 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.3.0 - PLAT-2011: [BR] PSP FW release for 0.5.0.08 - PLAT-1959: Incorrect pGpioTbl->GpioPin setting in FchPeLib.c - PLAT-1987: [CZ] PSP FW release 0.2.0.37 - PLAT-1948: [BR] BTCGBV message needs to be sent after shadowPstates - PLAT-1796: [CZ] Create S3 entry for D18F2x9C_x0081_0[F,2:0]77_dct[1:0] - PLAT-1910: KB and mouse doesn't work on USB2.0 port - PLAT-1915: [BR] Disable shadowPstates if AVFS CBS option is disabled - PLAT-1203: [BR] FCH SD Controller cannot detect SD card when D3 disabled - ENH466493: BR SMU FW 27.5.0 Release - PLAT-1354: [ST] FCH code doesn't match BKDG - PLAT-1353: [ST] FCH code doesn't match BKDG recommended value - PLAT-1878: [ST DDR4] Missing Mem Controller settings to update DqVref for mpstate change - PLAT-1849: New brand string 'AMD Embedded G-Series GX-' - BUG465142: [CZ] ECC error injection fails - PLAT-1851: [CZ/BR] IMC firmware update for fan startup PWM - PLAT-1691: [CZ/BR] IMC interface update for startup PWM - PLAT-1842: C Style Check Failure - PLAT-1769: Configure GPIO for UART0/1 pins based on user setting - ENH466338: HGST/WD HDDs will downgrade to gen2 from gen3 on Carrizo - PLAT-1847: [PSP-ST] PSP FW release for 0.6.0.1 - PLAT-1838: [CZ DDR4] Missing Mem Controller settings to update DqVref for mpstate change - BUG462525: [CZ] PrototypeCheck Issue of Memory - ENH466386: [CZ] sync changes from EDKII package to EDK - PLAT-1687: [CZ] Remove delay for SD D3 if SDIO WLAN is disabled - PLAT-963: Carrizo Reboot cycling hang at PC F582 under Win10 - ENH466381: Move USB 3 D3 Cold routine to SMI - PLAT-1795: [CZ] Optimize Trcpage calculation - PLAT-1784: SMU Cooling Table from BIOS/SCS not getting loaded correctly - PLAT-1774: [CZ] Need to check iGPU first before access GMM registers - PLAT-1771: [ST] Need to check iGPU first before access GMM registers - PLAT-1715: [CZ] Report all cores as single-threaded to the OS 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work ============================================================================= Version: 0.0.3.0 Release Date: Jul 2015 File: StoneyPI_0.0.3.0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev1.00 (#55072) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) ============================================================================= 1. Package contents AGESA - AGESA Arch2008 0.0.3.0 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v052 for Stoney platform solution VBIOS - Carrizo Generic VBios v027 & Gop v1.59 PlatformBIOS - Gardenia Platform BIOS RGY0030A.FD gardenia_st_family15h.bsd file StoneyFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 BIOSTestSuite - BIOSTestSuite v8.0.12.1920 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.1.0 - PLAT-1666: [CZ] Create a CBS option to tune address command timing - ENH466054: Change PspDxe from using Depex to Protocol notification - ENH466193: PspDxeReadyToBoot code change to support clear SMMLock in CC6 memory feature - ENH466194: Add command 0x17 to clear SMMLock bit in CC6 private memory - ENH466166: PSP FW 0.2.0.33 Carrizo release - PLAT-1480: [CZ] TPM2.0 device shows yellow bang in device manager - PLAT-1632: [ST] Incorrect PcieLateRestoreCZS3Script_ID - PLAT-1499: PSP buildDirectorytool Update to Version 1.2.7 Add new required parameter "-V" for "DP" subcommand - PLAT-1419: [BR] PSP FW release for 0.5.0.04 - PLAT-1481: New CBS Enable/Disable option for "ACC" - ENH466098: BR SMU FW 27.3.0 Release - PLAT-1498: [CZ] BIOS init time exceed criteria on ADK test with fTPM enabled - PLAT-1389: [CZ][DDR4] Incorrect memory type info is passed to driver - PLAT-1284: [ST] Boot fail(hang at POST) on DDR4 platform - PLAT-1304: [BR] Add new SMU option for 'Reliability Controller' - PLAT-1423: [ST] Sync up DDR4 code - PLAT-1364: [BR] Add a CBS option for shadowPstates - BUG464411: SPI Normal Read Bus Interface test failed - ENH465911: Incorrect XHCI SSID programming in D3 cold entry/exit - BUG465941: Intermittent hang upon cold reset or power on cycling - ENH465788: Setup option for DRAM terminations - PLAT-1331: C Style Checker Fail - PLAT-1338: [BR] add VID:DID/1B21:0612 into Payload Blacklist Device Table - PLAT-1325: [BR] change Bristol Ridge AVFS BIOS default setting to Enable - ENH465927: [CZ] Enable MMIO decode in iTpmGetResponse - ENH462938: Add AGESA option to control PMxC0[0] ThermalTrip status - ENH465899: [CZ] set On3FreeCmdLmt = 5 - ENH465853: CZ SMU FW 18.56.0 - PLAT-1290: [ST] Incorrectly invoking a CZ routine in mndctst.c - ENH465834: Update DRAM ZQ/CKE to CS Map per BKDG 3. Known Issues/Limitations - BUG450152: Crisis Recovery does not work ============================================================================= Version: 0.0.1.0 Release Date: Jun 2015 File: StoneyPI_0.0.1.0.ZIP ============================================================================= Compliant to specs: PID# - Preliminary BIOS and Kernel Developer's Guide Family 15h Models 70h-7Fh rev0.13 (#55072) - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) ============================================================================= * First version of Stoney Platform Initialization package that includes Processor initialization code for IBV/OEM platform BIOS Development. StoneyPI_0.0.1.0.ZIP hasn't been through AMD internal QA process, but completed BIOS verification using SimNow. 1. As previously communicated the purpose of the 0.1 release of StoneyPI is to provide customers with an early look at the new Architecture 2008 platform initialization library for Stoney. The 0.1 release is intended to be: a. 100% API complete b. able to boot a single fixed configuration under SimNow Per plan, the 0.1 release is NOT code complete or feature complete. Key features may be stubbed out, incomplete and/or buggy. Features may not function if used outside of the fixed demonstration configuration. Customers are able to use the 0.1 release to prepare their wrappers and conduct limited testing with the StoneyPI code under SimNow. AMD welcomes your feedback on this 0.1 release. The following future releases beyond 0.0.1.0 are planned: 0.3 - 100% code complete and feature complete, functionality largely untested 0.5 - Pre bring-up -Thoroughly tested under SimNow 0.6 - Alpha release - code brought-up on real silicon, QA passed 0.7 - Beta release / EVT - lab characterization data incorporated 0.9 - Production Release Candidate / DVT 1.0 - Production Release Additional intermediate releases may be issued as deemed necessary. 2. Package contents AGESA - AGESA Arch2008 0.0.1.0 for Family 15h Model 70h - 7Fh (Stoney) platform solutions CPM - Common Platform Module v052 for Stoney platform solution VBIOS - Carrizo Generic VBios v026 & Gop v1.58 PlatformBIOS - Gardenia Platform BIOS RGY0010B.FD gardenia_st_family15h.bsd file StoneyFp4Options.c Specification - AGESA Arch2008 Interface specification v3.00 Tools - AMD BIOSDBG v1.44.27 3. Build Instructions To be added later 4. Known Issues/Limitations =============================================================================