Release Notes for ----------------- Kaveri Platform Initialization (KaveriPI) ============================================================================= Version: 1.1.0.5 Release Date: May 2014 File: KaveriPI_1.1.0.5.ZIP NOTE: This Release supports of Kaveri FP3. ============================================================================= Compliant to specs: PID# - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.02 (#49125) - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) ============================================================================= 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.4: - BUG443092: Check BIOS source file's Copyright release date failed - ENH443877: SMU Firmware Release 13.46.0 - ENH443253: Core voltage offset trim workaround - ENH442877: Need platform-specific default for PCIe refclk SS percentage ============================================================================= Version: 1.1.0.4 Release Date: Apr 2014 File: KaveriPI_1.1.0.4.ZIP ============================================================================= Compliant to specs: PID# - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.02 (#49125) - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) ============================================================================= 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.3: - ENH442451: GNB mask VCE to DPM2 for low-power OPNs - ENH442580: SMU Firmware Release 13.43.0 - BUG441102: Add SMBIOS support for FX branded APUs - ENH441398: RESET SMBUS controller instead of KILL when contention happens ============================================================================= Version: 1.1.0.3 Release Date: Mar 2014 File: KaveriPI_1.1.0.3.ZIP ============================================================================= Compliant to specs: PID# - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.02 (#49125) - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) ============================================================================= 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.2: - BUG438610: MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM is not recorded if no DRAMs plugged in system - BUG439256: New brandstrings not recognized by SMBIOS - ENH439842: SMU Firmware Release 13.40.0 ============================================================================= Version: 1.1.0.2 Release Date: Mar 2014 File: KaveriPI_1.1.0.2.ZIP ============================================================================= Compliant to specs: PID# - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.01 (#49125) - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) ============================================================================= 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.1: - ENH436605: SMU Firmware Release 13.38.0 - ENH436593: Update L2 Resizing Settings for KV in BIOS - ENH436063: Replace all 2.0Ghz CCLK Pstate with 1.9Ghz CCLK ============================================================================= Version: 1.1.0.1 Release Date: Feb 2014 File: KaveriPI_1.1.0.1.ZIP ============================================================================= Compliant to specs: PID# - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.00 (#49125) - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) ============================================================================= 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.0: - ENH435365: Force SVI2 speed to 3.4M on both desktop and mobile platform - BUG427334: CPU Current limiting causes system to not boot - ENH435699: Change Default Upstream TX Preset to be P2 - ENH425325: Gen3 Equalization Back up Preset Search - ENH435871: SMU Firmware Release 13.36.0 - ENH435360: Update Brand Strings for BIOS override for NB and DT Kaveri APUs - BUG434640: D18F3x40 may be cleared unexpectedly - ENH430917: Disable PCIe PHY RX power gating for Gen3 hotpluggable ports - ENH434745: Implement Brand Name String override for initial launch products - ENH433544: KV platform power policy default change - ENH433708: Update PMU to revision 47e9 - BUG433606: Gen3 PHY settings not set when PSPP = Balanced Low - BUG418184: Detailed DRAM error data is not being returned in multi-bit error condition - BUG433181: For Asymmetric Config on DCTs, Framebuffer does not fall on interleaved region - ENH433454: Set "SataClkAutoOff" to "enable" with default - BUG431554: No video after resume from S3 with External Graphics setting - BUG432394: Disabling audio controller does not completely disable config space - ENH432731: Move display panel power-up later in POST - ENH431848: KV GMC memory hole programming update - ENH431556: KV CPU: 3.00 BKDG updates - ENH429614: OSCOUT1_CLK_sel and serial IRQ mode - ENH426022: Enabled FB in interleave region when memory is mismatched ============================================================================= Version: 1.1.0.0 Release Date: Jan 2014 File: KaveriPI_1.1.0.0.ZIP ============================================================================= Compliant to specs: PID# - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.00 (#49125) - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) ============================================================================= 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.0.8.0: - ENH431381: Kaveri_Firmware_13_30_0 - ENH426796: Enhancements for AMP 2400 settings to support another dram vendor Hynix - ENH426806: PMU to support Read-Modify-Write for F2x9C_x00 [F,8:0]1_[F,B:0]04A_dct[3:0] - ENH428498: 1.13 BKDG updates. - BUG427856: Integrated Info Table TDP values are not correct - ENH427987: NB Machine Check Control Mask need to be set when NB PG is enabled. - ENH426490: Add PCIe flow control credit programmability to RL CMOS options - ENH426343: Add PCIe flow control credit programmability to KV CMOS options - BUG427192: F15TnRegisterTablesAfterApLaunch table is not programmed for TN/RL - BUG409150: SMBIOS information show incorrect. - BUG426026: Mismatched header file name - BUG426965: When Power off PLLs are set to disabled SUT will stop POST at D3E7 - ENH427012: AGESA FCH support DISP2_CLK option for Kaveri - ENH425521: Can't disable "Unused SATA Port Auto Shut Down" feature. ============================================================================= Version: 1.0.8.0 Release Date: Dec 2013 File: KaveriPI_1.0.8.0.ZIP ============================================================================= Compliant to specs: PID# - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v1.12 (#49125) - AGESA Arch2008 Interface Specification, Revision v2.12 (#44065) ============================================================================= 2. Agesa ENHANCEMENTS and FIXED BUGS after 0.0.8.2: - BUG425988: PPD core lane 0 is ungated - BUG416513: Setting CPU Current Limit Control causes DEAD POST - ENH424783: Disable UNB power gating on KV FM2 - BUG424796: Hang during POST when GFX(PGD)Wrapper and GPP(PPD)Wrapper are disabled - ENH423903: Defer setting of EnCstateBoostBlockCC6Exit to later in boot sequence - ENH424783: Disable UNB power gating on KV FM2 - ENH424667: KV SMU FW release 13.26.1 - ENH424067: Add Cpu Type 4 designators for Kv FM2r2 - ENH418068: Disable GFX (PGD) Wrapper, GPP (PPD) Wrapper cause system fails to post - ENH423912: Add KV 1 DPC DDR-2400 "AMP" support - ENH423624: Remove P_ELEC_IDLE_MODE workaround in PPD wrapper - BUG424464: GMM address defined incorrectly - ENH423579: Program BME and LINK_DIS for dGPU PX powerdown - BUG422082: C Style Issues in Memory files - ENH421743: Update PMU to 2909 - Make 2D training more reliable across parts - ENH422727: Disable HTC during memory training - ENH421372: Power-gate PMU SRAM on disabled Channels (saves 50mW leakage per channel) - ENH421735: Apply additional ptr separation on KV for NCLK800/DDR1333 - ENH421729: New KV microcode patches 06003104/0600301C - ENH421148: Require DMIF_PG:DPG_PIPE_NB_PSTATE_CHANGE_CONTROL programmed for all pipes - BUG421433: Memory: BTS S3 test failure - ENH421956: GMC Programming updates to avoid agressive stutter - ENH404706: BIOS AGESA GNB Optimization