/* * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #include #include #include #include "psci_private.h" /******************************************************************************* * This function checks whether a cpu which has been requested to be turned on * is OFF to begin with. ******************************************************************************/ static int cpu_on_validate_state(aff_info_state_t aff_state) { if (aff_state == AFF_STATE_ON) return PSCI_E_ALREADY_ON; if (aff_state == AFF_STATE_ON_PENDING) return PSCI_E_ON_PENDING; assert(aff_state == AFF_STATE_OFF); return PSCI_E_SUCCESS; } /******************************************************************************* * Generic handler which is called to physically power on a cpu identified by * its mpidr. It performs the generic, architectural, platform setup and state * management to power on the target cpu e.g. it will ensure that * enough information is stashed for it to resume execution in the non-secure * security state. * * The state of all the relevant power domains are changed after calling the * platform handler as it can return error. ******************************************************************************/ int psci_cpu_on_start(u_register_t target_cpu, entry_point_info_t *ep) { int rc; unsigned int target_idx = plat_core_pos_by_mpidr(target_cpu); aff_info_state_t target_aff_state; /* Calling function must supply valid input arguments */ assert((int) target_idx >= 0); assert(ep != NULL); /* * This function must only be called on platforms where the * CPU_ON platform hooks have been implemented. */ assert(psci_plat_pm_ops->pwr_domain_on && psci_plat_pm_ops->pwr_domain_on_finish); /* Protect against multiple CPUs trying to turn ON the same target CPU */ psci_spin_lock_cpu(target_idx); /* * Generic management: Ensure that the cpu is off to be * turned on. * Perform cache maintanence ahead of reading the target CPU state to * ensure that the data is not stale. * There is a theoretical edge case where the cache may contain stale * data for the target CPU data - this can occur under the following * conditions: * - the target CPU is in another cluster from the current * - the target CPU was the last CPU to shutdown on its cluster * - the cluster was removed from coherency as part of the CPU shutdown * * In this case the cache maintenace that was performed as part of the * target CPUs shutdown was not seen by the current CPU's cluster. And * so the cache may contain stale data for the target CPU. */ flush_cpu_data_by_index(target_idx, psci_svc_cpu_data.aff_info_state); rc = cpu_on_validate_state(psci_get_aff_info_state_by_idx(target_idx)); if (rc != PSCI_E_SUCCESS) goto exit; /* * Call the cpu on handler registered by the Secure Payload Dispatcher * to let it do any bookeeping. If the handler encounters an error, it's * expected to assert within */ if (psci_spd_pm && psci_spd_pm->svc_on) psci_spd_pm->svc_on(target_cpu); /* * Set the Affinity info state of the target cpu to ON_PENDING. * Flush aff_info_state as it will be accessed with caches * turned OFF. */ psci_set_aff_info_state_by_idx(target_idx, AFF_STATE_ON_PENDING); flush_cpu_data_by_index(target_idx, psci_svc_cpu_data.aff_info_state); /* * The cache line invalidation by the target CPU after setting the * state to OFF (see psci_do_cpu_off()), could cause the update to * aff_info_state to be invalidated. Retry the update if the target * CPU aff_info_state is not ON_PENDING. */ target_aff_state = psci_get_aff_info_state_by_idx(target_idx); if (target_aff_state != AFF_STATE_ON_PENDING) { assert(target_aff_state == AFF_STATE_OFF); psci_set_aff_info_state_by_idx(target_idx, AFF_STATE_ON_PENDING); flush_cpu_data_by_index(target_idx, psci_svc_cpu_data.aff_info_state); assert(psci_get_aff_info_state_by_idx(target_idx) == AFF_STATE_ON_PENDING); } /* * Perform generic, architecture and platform specific handling. */ /* * Plat. management: Give the platform the current state * of the target cpu to allow it to perform the necessary * steps to power on. */ rc = psci_plat_pm_ops->pwr_domain_on(target_cpu); assert(rc == PSCI_E_SUCCESS || rc == PSCI_E_INTERN_FAIL); if (rc == PSCI_E_SUCCESS) /* Store the re-entry information for the non-secure world. */ cm_init_context_by_index(target_idx, ep); else { /* Restore the state on error. */ psci_set_aff_info_state_by_idx(target_idx, AFF_STATE_OFF); flush_cpu_data_by_index(target_idx, psci_svc_cpu_data.aff_info_state); } exit: psci_spin_unlock_cpu(target_idx); return rc; } /******************************************************************************* * The following function finish an earlier power on request. They * are called by the common finisher routine in psci_common.c. The `state_info` * is the psci_power_state from which this CPU has woken up from. ******************************************************************************/ void psci_cpu_on_finish(unsigned int cpu_idx, psci_power_state_t *state_info) { /* * Plat. management: Perform the platform specific actions * for this cpu e.g. enabling the gic or zeroing the mailbox * register. The actual state of this cpu has already been * changed. */ psci_plat_pm_ops->pwr_domain_on_finish(state_info); #if !(HW_ASSISTED_COHERENCY || WARMBOOT_ENABLE_DCACHE_EARLY) /* * Arch. management: Enable data cache and manage stack memory */ psci_do_pwrup_cache_maintenance(); #endif /* * All the platform specific actions for turning this cpu * on have completed. Perform enough arch.initialization * to run in the non-secure address space. */ psci_arch_setup(); /* * Lock the CPU spin lock to make sure that the context initialization * is done. Since the lock is only used in this function to create * a synchronization point with cpu_on_start(), it can be released * immediately. */ psci_spin_lock_cpu(cpu_idx); psci_spin_unlock_cpu(cpu_idx); /* Ensure we have been explicitly woken up by another cpu */ assert(psci_get_aff_info_state() == AFF_STATE_ON_PENDING); /* * Call the cpu on finish handler registered by the Secure Payload * Dispatcher to let it do any bookeeping. If the handler encounters an * error, it's expected to assert within */ if (psci_spd_pm && psci_spd_pm->svc_on_finish) psci_spd_pm->svc_on_finish(0); PUBLISH_EVENT(psci_cpu_on_finish); /* Populate the mpidr field within the cpu node array */ /* This needs to be done only once */ psci_cpu_pd_nodes[cpu_idx].mpidr = read_mpidr() & MPIDR_AFFINITY_MASK; /* * Generic management: Now we just need to retrieve the * information that we had stashed away during the cpu_on * call to set this cpu on its way. */ cm_prepare_el3_exit(NON_SECURE); }